Polaroid PBT9075 User manual
PBT9075
Light Show Karaoke Speaker
With Tripod and Wired Microphone
User Manual
Before You Begin...
READ CAREFULLY AND KEEP THIS MANUAL
Caution
To ensure safe and proper use, read all safety information before using the device. Only
use with manufacturer-approved batteries, chargers, accessories, and supplies.
• THIS DEVICE IS NOT A TOY, keep away from children and pets.
• Do not disassemble, modify, or repair the device.
• Do not expose to extreme temperatures (heat or cold), open flames, humid, or wet
conditions.
• Do not submerge in water.
• Low power may cause poor Bluetooth connection or sound distortion.
• Do not overcharge battery.
• If using with a USB adapter, make sure the adapter is not damaged.
• Do not allow the USB port or the connectors of the supplied USB cable to be exposed
to dust or water, or to come into contact with any conductive materials such as
liquids, metallic powders, etc.
• The speaker contains a built-in battery and should not be disposed of with regular
household waste. Please consult the local authorities on the correct way to dispose of
this device.
In the Box
• PBT9075 - Wireless Speaker (x1)
• Wired Microphone (x1)
• Tripod (x1)
• Remote Control w/ Battery (x1)
• 13.5V 1.3A Adapter (x1)
• User Manual (x1)
Location of Controls
[VOLUME] Dial:
Power ON/OFF,
Adjust Volume
DC 13.5V
Charging Port
[M] Button:
Change Input Mode
LED Screen
[ ] | [ ]
Buttons:
Skip Tracks/Stations
3.5 mm AUX Input
TF Card Slot
[ECHO VOL] Dial:
Adjust Mic Echo
[MIC VOL] Dial:
Adjust Mic Volume
Microphone
Input Port
[LED MODE] Button:
Switch LED Mode
USB Device
Input Port
[ ] Button:
Press: Pause/Resume,
Press + Hold: Scan Radio
Back Panel
of Speaker
PBT9075
Tripod
[ ] Button: Repeat
Power LED
Indicator
Getting Started
Charging the Speaker
Plug the pin of the included charging adapter into the 13.5V charging port on the
back of the speaker. Plug into a wall outlet.
When the speaker is low on power, a tone will be heard indicating that it needs
to be recharged.
Powering ON/OFF
• Flip the [POWER] switch to power the speaker ON.
• When powered ON, the speaker will enter Bluetooth
pairing mode, and may automatically re-pair to any
available previously-paired device nearby.
• Flip the [POWER] switch to power the speaker OFF.
Changing Input Modes
Press the [M] button on the back panel of the speaker to switch between input
modes. The LED screen on the back of the speaker will indicate the mode, and a
voice will be heard indicating the mode.
You must have a micro TF card or USB device inserted or AUX cable connected
to switch to these modes.
Adjusting Volume & Playback
• Adjust volume with the [VOLUME] dial or the controls on a connected device.
• Press the [ ] and [ ] buttons on the speaker to skip tracks or stations in
Bluetooth mode, FM Radio mode, USB mode and TF card mode.
• Press the [ ] button to pause and resume playback.
Bluetooth Pairing
1. Power the speaker ON. A tone will be heard and the LED screen will display the
word “BLUE.”
2. Set your mobile device to search for Bluetooth devices. When it appears, select
PBT9075 from the found devices.
3. After a successful pairing, a tone will be heard and you will be able to play music
on the speaker.
In Bluetooth mode, volume & playback can be adjusted using the controls on your
paired device, or the controls on the speaker listed in the Adjusting Volume &
Playback section above.
Using the Speaker Lights
• Press the LED power switch on the back of the
speaker to power ON/OFF.
• Press the [LED MODE] button on the back of the
speaker to change LED light modes.
Using the FM Radio
Power the speaker ON and switch to FM mode. A voice will be heard, and the LED
screen will display the current FM frequency.
If it is your first time using the FM radio, it’s recommended to do a full scan of
nearby stations. Press and hold the [ ] button to start scanning and saving
available stations.
Radio functions can be controlled with the buttons on the speaker.
• Press and hold the [ ] button to start or stop scanning.
• Press the [ ] and [ ] buttons to flip through saved stations.
Using the AUX Input
Insert one end of a 3.5 mm auxiliary cable (not included) into the AUX input port
on the back of the speaker. Insert the other end into the headphone jack or 3.5 mm
aux output port on your media-playing device.
Press the [M] button until you enter AUX mode.
In AUX mode, all playback will be controlled by your connected device.
USB Device and TF Card Input
Insert a USB device, such as a USB flash drive, or micro SD/TF card into the USB
or TF card input ports on the back of the speaker.
Note: To listen to music on your USB device, you may need to have files stored in
the root folder of the device. Check your USB device’s manufacturer information
for more details.
If the speaker does not automatically switch to the correct mode, press the [M]
button until you enter USB or TF card mode. A voice will be heard indicating the
mode, and the speaker will automatically begin playing music off the device.
In USB and TF mode, playback and volume adjustment will be controlled with
controls on the back of the speaker.
Using the Microphone
Plug the 1/4” connector of the included microphone into the MIC input port on the
back of the speaker. Switch the mic ON.
• Adjust mic echo using the [ECHO VOL] dial on the back of the speaker.
• Adjust mic volume using the [MIC VOL] dial on the back of the speaker.
Note: In order to avoid loud feedback, keep the microphone behind the speaker
and pointed away from the speaker, and switch the microphone off when not in
use.
Remote Control
• Button: Enter/exit standby
• Button: Repeat playlist (TF/USB)
• MODE Button: Change input mode
• Button: Play/pause
• Button: Skip to previous
track/station
• Button: Skip to next track/station
• Button: Mute/unmute audio
• VOL- Button: Decrease volume
• VOL+ Button: Increase volume
• EQ Button: Change EQ mode
• U/TF Button: Enter USB/TF mode
• Numbers 0-9: Select track in USB or
TF mode (When selecting a track #10
or higher, press the numbers
quickly.)
Note: You may need to remove the
plastic tab from the remote control’s
battery department in order to use.
Unfolding the Tripod
1. Turn the thumb screw handle on the tripod base counterclockwise until the
tripod is able to open.
2. Holding the center column firmly in one hand, grip and carefully pull one of the
legs outward until the tripod begins to unfold, and the center column slides up.
3. Push the center column up until the tripod is fully opened and the center
column cannot be pushed up any more.
4. Turn the thumb screw handle clockwise until tight.
(Top of Tripod Base)
Turn handle
counterclockwise
Turn handle
clockwise
1 2
3 4
Adjusting the Tripod’s Height
1. Turn the thumb screw handle on the upper part
of the tripod’s center column counterclockwise
until loose.
2. Raise or lower the adjustable rod to the desired
height.
3. Turn the thumb screw handle clockwise until
tight to secure.
Mounting the Speaker
Unfold the tripod and adjust to the desired height.
Mount the hole on the bottom of the speaker onto
the rod of the tripod.
Turn the thumb screw handle on the speaker
clockwise until tight to secure the speaker.
NOTE: The tripod can be used with any speaker with a
mounting hole that fits onto the rod of the tripod - a
diameter of approximately 1.45”.
1.45”
Table of contents
Other Polaroid Speakers manuals
Polaroid
Polaroid PLOK901 User manual
Polaroid
Polaroid PLS92SP User manual
Polaroid
Polaroid PL808BM User manual
Polaroid
Polaroid CQL1604-B User manual
Polaroid
Polaroid PWFSK2000 User manual
Polaroid
Polaroid PBT555 User manual
Polaroid
Polaroid PBT2001 User manual
Polaroid
Polaroid PBT620 User manual
Polaroid
Polaroid EBT950 User manual
