Plantronics Savi 8200 Series User manual
Quick Start Guide
Poly Savi 8200 Series
Welcome to Intermedia Unite
T42G
What’s in the box?
Poly Savi 8200 Series
1
A. Base
B. Headset
C. Handset Telephone Interface Cable
D. USB Cable
C.D.E.
A. B.
E. Power Adapter
1
8210 (monaural) 8220 (binaural)
< OR >
Overview
BASE
2
1 2 3 4
567
8 9 10
11 12 13 14
8 Computer button
1 Power jack
2 Handset lifter jack
3 Telephone interface cable jack
4 USB port
5 Desk phone speaking volume
6 Desk phone configuration switch
7 Desk phone listening volume
9 Mobile phone button
10 Desk phone button
11 Incoming call ringer
12 Bluetooth pairing button/LED
13 Subscription button/LED
14 Charging LED
Overview
HEADSET
3
12
3
4
5
6
1Volume wheel
2Call button
3Mute
4 Headset LED
5 Power button
6 ANC (Active Noise Canceling)
Be safe
Please read the safety guide for important safety, charging, battery and
regulatory information before using your new headset.
3
Guided Setup
The Savi 8200 headsets support a variety of connection methods
depending on your local setup. Please select from the following
options.
PERSONAL COMPUTER
The Savi 8200 headsets work with the Unite Desktop application
allowing hands-free answer and hang-up. Use the diagram below to
assist in setting up your system
1. Connect the USB-A cable to your personal computer. Connect
the other end to the USB port on the back of the base.
2. Connect the power cable to the base and plug the powe
r
adapter into an electrical outlet.
3. Place the headset onto the base to charge.
(Please allow at least 20 minutes initial charge time.)
INSTALL SOFTWARE
Plantronics Hub is software that allows you to control the settings on
your Savi 8200 headset. Additionally, it enables integration with the
Unite Desktop application giving you hands-free control during
phone calls. Without Plantronics Hub installed on your computer,
your headset will work with the Unite Desktop application, but will
not work in a hands-free manner.
To download Plantronics Hub, please navigate to the download
website and follow the instructions:
•plantronics.com/software
4
Once Plantronics Hub is installed, we recommend two settings
changes. Navigate to Settings -> General and change the following
options:
1. Set “Audio Sensing” to “On”.
a. Ths will allow your headset to sense when an audio
connection is made and connect to it quicker.
2. Set “Default Phone Line” to “PC”.
a. This ensures any time you use hands-free options the
headset will automatically attempt to use them with your
computer.
1. Connect the USB-A cable to your Poly VVX phone’s USB port.
2. Connect the power cable to the base and plug the power
adapter into an electrical outlet.
3. Place the headset onto the base to charge. Please allow at least
20 minutes initial charge time.
4. Press and hold the Computer button on the base until it flashes
green. This will set your default channel to the USB connection.
POLY VVX
The Savi 8200 headsets can work with IP Desk Phones with various
levels of integration. Poly VVX desk phones enjoy a deeper level of
integration via the included USB-A cable. Use the diagram below
to assist in setting up your system.
USB-A CABLE with POLY VVX
5
6
1. Connect the large end of the telephone interface cable to the
base unit. Connect the other end to your IP desk phone. If your
IP Desk phone has a headset port, it is best to use it. If your IP
desk phone has no headset port, you may connect the telephone
interface cable to the handset cable as shown above.
2. Connect the power cable to the base and plug the power adapter
into an electrical outlet.
3. Place the headset onto the base to charge. Please allow at least
20 minutes initial charge time.
No Headset Port
Headset Port
IP DESK PHONE
All IP desk phones should support basic connectivity and functionality
via the included telephone interface cable. Use the diagram below to
assist in setting up your system.
TELEPHONE INTERFACE CABLE
OR
7
1. If you connected to the headset port, to use the headset:
a. Press the headset button on your phone,
b. Press the Phone button on the top of the base,
c. You should now hear dial tone and may place a call.
2. If you connected to the handset port:
a. Manually pick up the handset,
b. Press the phone button on the top of the base,
c. You should now hear dial tone and may place a call.
Once connected, your IP Desk Phone will work with your headset
depending on the method you used:
IP DESK PHONE (continued...)
TELEPHONE INTERFACE CABLE
Other manuals for Savi 8200 Series
2
Table of contents
Other Plantronics Headset manuals
Plantronics
Plantronics BLACKWIRE C610 User manual
Plantronics
Plantronics ENCOREPRO 710 DIGITAL User manual
Plantronics
Plantronics DISCOVERY 925 User manual
Plantronics
Plantronics sp05 User manual
Plantronics
Plantronics Savi W440-M User manual
Plantronics
Plantronics VOYAGER 510-USB User manual
Plantronics
Plantronics CS55 User manual
Plantronics
Plantronics ML15 User manual
Plantronics
Plantronics EXPLORER 50 SERIES User manual
Plantronics
Plantronics Explorer 320 User manual
Plantronics
Plantronics VOYAGER PRO User manual
Plantronics
Plantronics BG810S User manual
Plantronics
Plantronics 84100-01 User manual
Plantronics
Plantronics Savi W440A User manual
Plantronics
Plantronics S12 Setup guide
Plantronics
Plantronics S11 Setup guide
Plantronics
Plantronics W430 User manual
Plantronics
Plantronics M70 Series User manual
Plantronics
Plantronics Savi Go User manual
Plantronics
Plantronics SAVI GO WG200/B Reference guide
