Plantronics PULSAR 260 User manual

USER GUIDE

P UL SA RT M 260

..................................................................................

STEREO BLUETOOTH®HEADSET

Pl antronics Pulsar™260

Stereo Bluetooth headSet

U S E R G U I D E

Sold by:

http://www.TWAcomm.com

Toll Free: (877) 389-0000

TABLE OF CONTENTS

Package Contents and Feataures 3

Charging 4

Powering 4

Indicator Lights 4

Pairing 5

Making/Answering/Ending Calls 5

Wearing Options 6

Powered Speaker & Stereo Uses 6

Pendant Controls 7

Headset Controls 8

Troubleshooting 9

System Reset 9

Product Speciﬁcations 10

Warranty 10

Technical Assistance 11

Regulatory Information 11

Warnings 12

Visit www.plantronics.com/productregistration to register your product online so we

can provide you with the best possible service and technical support.

This User Guide provides instructions on the setup and usage of the Plantronics Pulsar™

260 Bluetooth®Headset. Before getting started, please review the safety booklet included

in your package.

For additional help, service or support information, refer to product warranty card,

Troubleshooting on page 9 or visit www.plantronics.com.

WELCOME

Mute/Play/Pause

Volume up

Volume down

Track forward

Track back

PACKAGE CONTENTS & FEATURES

Pulsar 260 Headset

Sound-isolating

earbuds

2.5mm plug

Microphone with call

control button

Audio-out cable

Stereo Bluetooth Pendant

Detachable clip

Indicator light

Power on/off/Pairing

2.5mm port

Mini-USB port

LanyardAC charger

Pendant

Controls:

Action Light

Charging Flashes Red

Fully charged Solid blue

Power/battery status

3 red ﬂashes =

2 red ﬂashes =

1 red ﬂash =

NOTE: Flashes red

when headset is

initially powered on.

Pairing/connect Flashes red and blue

Bluetooth pendant connected

to headset

Flashes blue

CHARGING

You must charge for 3 hours before ﬁrst use.

To charge, connect AC charger to pendant

mini-USB socket.

Pendant indicator light ﬂashes red when

charging and changes to solid blue when fully

charged.

POWERING ON/OFF

Press and hold power on/off switch for >2 seconds.

PENDANT INDICATOR LIGHTS

PAIRING

To pair pendant with phone:

Begin with pendant powered on.

1. Press and hold both the

mute/play/pause button and the

power on/off/pairing button

simultaneously. When the

indicator light ﬂashes red and

blue, release buttons.

2. While pendant is ﬂashing red and

blue, use the phone menu to search

for Bluetooth devices and select

“260 Plantronics.”

3. When prompted for passkey,

enter 0000.

Pendant ﬂashes blue when paired

successfully.

For set up and pairing instructions with

Bluetooth devices other than mobile

phones, please consult your Bluetooth

device user guide.

260Plantronics

M3000 Plantronics

M2500 Plantronics

0000

Enter

Passkey

MAKING/ANSWERING/ENDING CALLS

To make a call:

Dial on phone; call transfers

automatically to headset.

To answer or end a call:

Brieﬂy press call control

button on headset.

To adjust volume:

Short press +or –buttons on

pendant for incremental change,

hold for continuous change.

WEARING OPTIONS

Pulsar 260 can be worn in two ways:

• Clipped to your belt or clothing

• Around your neck using the

lanyard

POWERED SPEAKER & STEREO USES

For public listening you can connect the

stereo Bluetooth pendant directly to pow-

ered speakers or your home stereo with

the included audio-out cable (provided

your speakers/ home stereo is ﬁtted with

a Line-in or Auxiliary 3.5mm audio sock-

et). Please consult your equipment guide.

1. Ensure the stereo Bluetooth

pendant and your speakers/home

stereo are powered off.

2. Connect the audio-out cable

2.5mm plug to the stereo Bluetooth

pendant and the 3.5mm plug to to

the powered speakers/home ste-

reo Line-in or Auxiliary 3.5mm au-

dio socket as shown below.

3. Power on both the stereo

Bluetooth pendant and your

speakers/home stereo.

PENDANT CONTROLS

Key Feature Action Tone

Power on/off Short press No tone

Track forward

and back*

Short press to skip to

next track or to go back

to previous track

High tone

Mute call/audio Short press to mute/unmute Repeating low tone

every 60 seconds

Play and pause* Short press to pause/

resume audio

High tone

Adjusting volume Short press Mid tone for each

adjustment, double

low tone at limit

*Only works if Bluetooth device supports Bluetooth Audio/Video Remote Control Profile (AVRCP).

Power on/off

Key Feature Action Tone

Making/answering/ending

calls

Short key press High tone

Switching an active call

from headset to phone or

phone to headset

Long key press High tone

followed by

low tone

HEADSET CONTROLS

Key Feature Action Tone

Activate last

number redial

Double short key press High tone for each

key press

Activate voice dial Long key press High tone followed

by low tone

Call reject Long key press High tone followed

by low tone

Hands-Free Features

Features must be supported by Bluetooth device or service provider.

TROUBLESHOOTING

Problem Solution

My headset does not work

with my phone. • See page 5 “Pairing.”

• Perform a reset on Pulsar 260 as described below.

Callers cannot hear me. • Headset is muted. Press the mute button on the

pendant to unmute the microphone.

• Be sure pendant is powered on and headset is

paired with audio device. See page 5 “Pairing.”

Callers say my voice is

too quiet. Ensure that microphone is pointing towards

your mouth.

I cannot hear caller/dial

tone or audio sound. • Pendant is turned off. Check the indicator light for

status.

• Headset is out of range. Walk to within 10 metres of

the phone and check the Bluetooth link on your

phone’s display.

• Battery is dead. Charge your battery using the AC

charger supplied.

• Listening volume is too low. Press the volume up

button to increase the sound heard in the headset.

I cannot hear music from

my powered speakers/

Hi-Fi when using the audio-

out cable.

• Pendant must be turned on and connected to the

powered speakers/Hi-Fi with the audio-out cable.

• Check music player on Bluetooth phone is switched

on and Pulsar 260 is the active Bluetooth device.

SYSTEM RESET

A reset button is located

(recessed) behind the

clothing clip.

To reset:

1. Remove clip as shown

at right.

2. Press and release

button using a pen.

PRODUCT SPECIFICATIONS

Listen Time* Up to 7 hours

Talk Time* Up to 9 hours

Standby Time* Up to 200 hours

Charge Time 3 hours

Range Bluetooth standard 10 metres

Headset and Pendant Weight 25 grams

Power Requirements 5VDC - 300 mA

Battery Type Lithium Ion Polymer

Speaker Frequency Response •Telephony 300 Hz to 3600 Hz (CVSD)

•Stereo Audio 20 Hz to 20 kHz(16-bit 48kHz SBC Coding)

Impedance 32 +-4 Ohms x1 kHz

Distortion <5% to 19 kHz

Version Bluetooth 2.0

Supports Bluetooth Hands-Free and Headset Profiles, Advanced Audio Distribution Profile (A2 DP),

Audio/Video Remote Control Profile (AVRCP), and Generic Audio/Video Distribution Profile

(GAVDP). For stereo sound, Bluetooth enabled devices must support the Advanced Audio

Distribution Profile (A2DP).

*Performance may vary by device.

WARRANTY

LIMITED WARRANTY

• This warranty covers defects in materials and workmanship of products

manufactured, sold or certiﬁed by Plantronics which were purchased and used

in the United States.

• The warranty lasts for one year from the date of purchase of the products.

• This warranty extends to you only if you are the end user with the original

purchase receipt.

• We will at our option, repair or replace the products that do not conform to the

warranty. We may use functionally equivalent reconditioned/refurbished/

remanufactured/pre-owned or new products or parts.

• To obtain service in the U.S., contact Plantronics at (866) 363-BLUE (2583).

• THIS IS PLANTRONICS’ COMPLETE WARRANTY FOR THE PRODUCTS.

• This warranty gives you speciﬁc legal rights, and you may also have other

rights that vary from state to state. Please contact your dealer or our service

center for the full details of our limited warranty, including items not covered

by this limited warranty.

Other manuals for PULSAR 260

Table of contents

Other Plantronics Headset manuals

Plantronics

Plantronics CS55H User manual

Plantronics

Plantronics GameCom 777 User manual

Plantronics

Plantronics SupraPlus H261N User manual

Plantronics

Plantronics EXPLORER 220 SERIES User manual

Plantronics

Plantronics Voyager 855 User manual

Plantronics

Plantronics CS10 User manual

Plantronics

Plantronics Discovery 975 User manual

Plantronics

Plantronics S12 Setup guide

Plantronics

Plantronics CS50 User manual

Plantronics

Plantronics AVAYA AWH65 Reference guide

Plantronics

Plantronics Savi W740 User manual

Plantronics

Plantronics DISCOVERY 925 User manual

Plantronics

Plantronics Poly Voyager 4300 UC Series User manual

Plantronics

Plantronics EXPLORER 240 - Reference guide

Plantronics

Plantronics M M220 User manual

Plantronics

Plantronics VOYAGER 510 User manual

Plantronics

Plantronics Blackwire 225 User manual

Plantronics

Plantronics VOYAGER 520 User manual

Plantronics

Plantronics CS50-USB User manual

Plantronics

Plantronics Savi 440 User manual

Plantronics

Plantronics ML15 User manual

Plantronics

Plantronics Blackwire 3200 Series User manual

Plantronics

Plantronics Savi W720 User manual

Plantronics

Plantronics BackBeat 903 User manual

Popular Headset manuals by other brands

Sena

Sena SMH10 quick start guide

IASUS

IASUS Stealth IA-NT4-BASIC-BT manual

Sennheiser

Sennheiser EPOS ADAPT 230 user guide

Doro

Doro Flexus HS2005 user guide

GE 98971 datasheet

Hama

Hama 00184070 quick start guide

Blue Tiger

Blue Tiger Advantage PLUS user manual

Jawbone

Jawbone Icon user manual

Jabra

Jabra FR 20 user guide

Roxcore

Roxcore Flow A+ manual

Turtle Beach

Turtle Beach XP 510 user guide

Philips

Philips SHB6101 Specification sheet

Jabra

Jabra PRO 9460 Duo datasheet

HyperX

HyperX HyperX Cloud Flight manual

Bose

Bose MIE2 Mobile owner's guide

Jabra

Jabra Steel quick start guide

HyperX

HyperX cloud ii quick start guide

Southwing

Southwing SA505 Specifications