Plantronics M3000 User manual

Plantronics Ltd - Released

3650 M3000 pair rev002 1 24th July 2003

M3000 Pairing Instructions – Nokia 3650 Mobile Phone

Before pairing the Plantronics M3000 with the Nokia 3650, please ensure both

devices are fully charged according to the instructions in the respective User

Guides.

1. Turn the Nokia 3650 phone and the Plantronics M3000 headset ON.

2. On the 3650:

a) Press the Menu key, then use the scroll keys to choose the

Connectivity menu. Press the middle of the scroll key to Select.

b) Use the scroll keys to choose the Bluetooth menu (this is

normally the menu displayed) and press the middle of the scroll

key to select.

c) Use the scroll keys to choose the choose Bluetooth Off (this is

normally the menu displayed) and press the middle of the scroll

key to select.

d) The handset will display Bluetooth On. In this menu. Bluetooth is

now be switched on in the phone.

3. On the Plantronics M3000:

a) Put the M3000 into pairing mode by press the “Volume Up” &

“Call Control” buttons simultaneously until the Indicator light

begins to flash alternate green and red. (see M3000 User

Instructions).

4. On the Nokia 3650:

a) In the Bluetooth menu, use the right scroll menu to select the

Paired devices menu

b) Press the Options key, scroll to New paired device (default) and

press Select. The phone displays Searching for audio

accessories

c) In a few moments, the phone will display all nearby Bluetooth

devices. Using scroll key, choose M3000 by Plantronics and

press the Select key.

d) Enter the 4-digit Passkey 0000 and press the OK key. The

handset will display Pairing with M3000 by Plantronics complete.

e) The M3000 will appear in the Paired device list.

Your M3000 headset is now paired with the 3650 phone.

Plantronics Ltd - Released

3650 M3000 pair rev002 2 24th July 2003

Before connecting the headset to the phone, please do the following:

a) While in the Bluetooth menu, use the scroll keys to select Paired

Devices.

b) The display will show M3000 by … and possibly other devices.

Use the scroll key to select M3000 by … and press Options

c) Use the scroll keys to select Set as authorised. Press Select.

The display will show Connections will take place automatically without

confirmation. Continue? Press Yes.

The headset must now be connected to the phone. This can be done in 2 ways:

Using the Phone Menu

a) While in the Bluetooth, use the scroll keys to select Paired

Devices.

b) The display will show M3000 by Plant … and possibly other

devices. Use the scroll key to select M3000 by Plant … and

press Options

c) Use the scroll keys to select Connect then press Select

d) The phone will display Connecting to M3000 by plantronics, then

Connected to M3000 by plantronics.

e) Press the End Call button to return to main menu.

Using the M3000 headset

If the headset is switched off, it will be disconnect from the 3650. The headset

can be reconnected by simply pressing the headset Call Control button.

Plantronics Ltd - Released

3650 M3000 pair rev002 3 24th July 2003

Making and Accepting Calls

To accept an in-coming call via the M3000 Headset

1. An in-coming call will cause both the phone and the headset to ring.

Note that there may be a delay of a few seconds between the phone

ringing and the headset starting to ring.

2. When you hear the ringing tone in the M3000 headset, press the “Call

Control” button to answer the call.

If you press the “Call Control” button before the headset starts to ring the

call may not be answered and an error tone will sound in the headset.

Once you hear this tone you can then press the “Call Control” button to

pick up the call.

To end a call using the M3000 Headset

The call can be ended either by pressing the “End / No” key on the 3650

or by pressing the “Call Control” button on the M3000.

To place a call using the keypad:

1. Dial the number as normal and press the “Call” key on the 3650. The

call can be ended either in the phone or by the headset – see above.

To place a call using Voice Dialing with the M3000 Headset:

NB: Before using the M3000 for voice dialling, ensure that you have

followed the instructions in the Nokia 3650 User Guide for voice dialling,

and that you have recorded the names of the contacts you wish to call via

voice dialling. Place a test call from the 3650 using voice dialling to ensure

that it is working before using the M3000 headset.

1. Press and hold the “Call Control” button on the M3000 until you hear a

beep in the headset. After a moment you will hear another beep in the

headset as a prompt for voice dialling and the phone display will show

“Speak Now”

2. State the name of the contact you wish to dial and the call will be

placed.

To place a call using Last Number redial

1. Double press the “Call Control” button in quick succession. The last

number dialled will be called.

Plantronics Ltd - Released

6310 M3000 pair rev002 1 24th July 2003

M3000 Pairing Instructions – Nokia 6310 Mobile Phone

Before pairing the Plantronics M3000 with the Nokia 6310, please ensure both

devices are fully charged according to the instructions in the respective User

Guides.

1. Turn the Nokia 6310 phone and the Plantronics M3000 headset ON.

2. On the 6310:

a) Press “Menu” key, then use the ∧ or ∨ keys to choose the

“Bluetooth” menu.

b) Press “Select” again. Use the ∧ or ∨ keys to choose “On”.

c) Press “Select”. The handset will display “Bluetooth switched

on”. Bluetooth is now switched on in the phone.

3. On the Plantronics M3000:

a) Put the M3000 into pairing mode by press the “Volume Up” &

“Call Control” buttons simultaneously until the Indicator light

begins to flash alternate green and red. (see M3000 User

Instructions).

4. On the Nokia 6310:

a) In the “Bluetooth” menu, use the ∧ or ∨ keys to select “Search

for audio accessories”

b) In a few moments, the phone will display all nearby Bluetooth

devices. Using the ∧ or ∨ keys, choose “M3000 by Plantronics”

and press the “Select” key.

c) Enter the 4-digit Passkey 0000 and press the “OK” key. The

handset will display “Paired with M3000 by Plantronics” and

then “Connected to M3000 by Plantronics”.

d) Use the “Back” key to return to the main menu

Your M3000 headset is now paired and connected with the 6310 phone.

If the headset is switched off, it will be disconnected from the 6310. The headset

can be reconnected using the 6310 Bluetooth menu, or alternatively, by simply

pressing the Call Control button of the headset. However, a menu option must be

set on the phone. Before doing this, switch off the headset:

a) To allow the headset to connect to the phone automatically, the

phone must be configured correctly. Press Menu key, then use

the ∧or∨keys to Select the Bluetooth menu.

Plantronics Ltd - Released

6310 M3000 pair rev002 2 24th July 2003

b) In the Bluetooth menu, use the ∧ or ∨ keys to select View Paired

Devices. Press Select.

c) The display will show M3000 by … and possibly other devices.

Select M3000 by … and press Options

d) Use the ∧ or ∨ keys to select Request conn. authorization. Press

Select.

e) The display will show Yes or No. Use the ∧ or ∨ keys to choose

No and press the Select.

f) The phone will display No authorisation required.

Return to main menu.

Switch on the M3000 headset. Press the Call Control button on the

M3000 and the headset will connect to the phone.

Plantronics Ltd - Released

6310 M3000 pair rev002 3 24th July 2003

Making and Accepting Calls

To accept an in-coming call via the M3000 Headset

1. An in-coming call will cause both the phone and the headset to ring.

Note that there may be a delay of a few seconds between the phone

ringing and the headset starting to ring.

2. When you hear the ringing tone in the M3000 headset, press the “Call

Control” button to answer the call.

If you press the “Call Control” button before the headset starts to ring the

call may not be answered and an error tone will sound in the headset.

Once you hear this tone you can then press the “Call Control” button to

pick up the call.

To end a call using the M3000 Headset

The call can be ended either by pressing the “End Call” key on the 6310

or by pressing the “Call Control” button on the M3000.

To place a call using the keypad:

1. Dial the number as normal and press the “Call” key on the 6310. The

call can be ended either in the phone or by the headset – see above.

To place a call using Voice Dialing with the M3000 Headset:

NB: Before using the M3000 for voice dialling, ensure that you have

followed the instructions in the Nokia 6310 User Guide for voice dialling,

and that you have recorded the names of the contacts you wish to call via

voice dialling. Place a test call from the 6310 using voice dialling to ensure

that it is working before using the M3000 headset.

1. Press and hold the “Call Control” button on the M3000 until you hear

a beep in the headset. After a moment you will hear another beep in

the headset as a prompt for voice dialling and the phone display will

show “Speak Now”

2. State the name of the contact you wish to dial and the call will be

placed.

To place a call using Last Number redial

1. Double press the “Call Control” button in quick succession. The last

number dialled will be called.

Plantronics Ltd - Released

T68 M3000 pair rev002 1 24

July 2003

M3000 Pairing Instructions – Sony Ericsson T68 Mobile Phone

Before pairing the Plantronics M3000 with the Sony Ericsson T68, please ensure

both devices are fully charged according to the instructions in the respective User

Guides.

1. Turn the Sony Ericsson T68 phone and the Plantronics M3000 headset ON.

2. On the T68, using the Joystick:

i. Select “Connect” and press the joystick.

ii. Scroll down to “Bluetooth” and press the joystick

iii. Scroll down to “Operation Mode”, and press the joystick

iv. Scroll down to “On” and press the joystick.

Bluetooth is now be switched on in the phone.

Note: If Bluetooth has already been activated, press the “No” Key (End Call

button).

3. On the Plantronics M3000:

i. Put the M3000 into pairing mode by press the “Volume Up” &

“Call Control” buttons simultaneously until the Indicator light

begins to flash alternate green and red. (see M3000 User

Instructions).

4. On the Sony Ericsson T68 under “Bluetooth” menu:

i. Scroll down to “Paired Devices” and press the joystick

ii. The phone will display “Add Device”. Press the joystick.

iii. Scroll to “Phone initiates” and press the joystick.

iv. Scroll to “Headset” and press the joystick.

v. The phone will display “Searching”

vi. After a few moments the phone will display all the Bluetooth

devices within range. Select the “M3000 by Plant” and press

the joystick.

vii. The phone will request the “Passkey:”. Enter 0000 using the

keypad then press the joystick. The phone will display

“Pairing” followed by “Pairing Successful”.

viii. The phone will show “Name Tag:” M3000 by Plantronics.

Press the joystick.

ix. The phone will show “Added to Paired Devices”

x. Use the “No” Key (End Call button) to return to the main

menu.

Your M3000 headset is now paired with the T68 phone.

Plantronics Ltd - Released

T68 M3000 pair rev002 2 24

July 2003

Making and Accepting Calls

To accept an in-coming call via the M3000 Headset

1. An in-coming call will cause both the phone and the headset to ring.

Note that there may be a delay of a few seconds between the phone

ringing and the headset starting to ring.

2. When you hear the ringing tone in the M3000 headset, press the “Call

Control” button to answer the call.

If you press the “Call Control” button before the headset starts to ring the

call may not be answered and an error tone will sound in the headset.

Once you hear this tone you can then press the “Call Control” button to

pick up the call.

To end a call via the M3000 Headset

The call can be ended either by pressing the “Call End / No” key on the

T68 or by pressing the “Call Control” button on the M3000.

To place a call using the keypad:

1. Dial the number as normal and press the “Call” key on the T68. The

audio will automatically be transferred to the headset.

To place a call using Voice Dialing with the M3000 Headset:

NB: Before using the M3000 for voice dialling, ensure that you have

followed the instructions in the Sony Ericsson T68 User Guide for voice

dialling, and that you have recorded the names of the contacts you wish to

call via voice dialling. Place a test call from the T68 using voice dialling to

ensure that it is working before using the M3000 headset.

1. Press and hold the “Call Control” button on the M3000 until you hear a

beep in the headset. After a moment you will hear another beep in the

headset as a prompt for voice dialling and the phone display will show

“After the tone, say a name or command”

2. State the name of the contact you wish to dial and the call will be

placed.

Plantronics Ltd - Released

T610 M3000 pair rev002 1 24

July 2003

M3000 Pairing Instructions – Sony Ericsson T610 Mobile Phone

Before pairing the Plantronics M3000 with the Sony Ericsson T610, please

ensure both devices are fully charged according to the instructions in the

respective User Guides.

1. Turn the Sony Ericsson T610 phone and the Plantronics M3000 headset ON.

2. On the T610, Using the upper right key “more”, scroll and select “Turn On

Bluetooth”.

Bluetooth is now be switched on in the phone.

3. Using the joystick to scroll and select the following menus: “Connectivity”,

“Bluetooth”, “My Devices”

4. On the Plantronics M3000:

i. Put the M3000 into pairing mode by press the “Volume Up” &

“Call Control” buttons simultaneously until the Indicator light

begins to flash alternate green and red. (see M3000 User

Instructions).

5. On the T610:

i. New Devices will be displayed. Select “Add” Device.

ii. In a few moments, the phone will display all nearby Bluetooth

devices. Scroll and select “M3000 by Plantronics” and press

the “Select” key.

iii. Enter the 4-digit Passkey number 0000 and press the “OK”

key.

iv. The message “M3000 By Plantronics added to My Devices”

will be temporarily displayed by the phone.

v. Pairing is complete. Return to the Main Menu.

Your M3000 headset is now paired with the T610 phone.

Plantronics Ltd - Released

T610 M3000 pair rev002 2 24

July 2003

Making and Accepting Calls

To accept an in-coming call via the M3000 Headset

1. An in-coming call will cause both the phone and the headset to ring.

Note that there may be a delay of a few seconds between the phone

ringing and the headset starting to ring.

2. When you hear the ringing tone in the M3000 headset, press the “Call

Control” button to answer the call.

If you press the “Call Control” button before the headset starts to ring the

call may not be answered and an error tone will sound in the headset.

Once you hear this tone you can then press the “Call Control” button to

pick up the call.

To end a call via the M3000 Headset

The call can be ended either by pressing the “Call End / No” key on the

T610 or by pressing the “Call Control” button on the M3000.

To place a call using the keypad:

1. Dial the number as normal and press the “Call” key on the T610. The

audio will automatically be transferred to the headset.

To place a call using Voice Dialing with the M3000 Headset:

NB: Before using the M3000 for voice dialling, ensure that you have

followed the instructions in the Sony Ericsson T610 User Guide for voice

dialling, and that you have recorded the names of the contacts you wish to

call via voice dialling. Place a test call from the T610 using voice dialling to

ensure that it is working before using the M3000 headset.

1. Press and hold the “Call Control” button on the M3000 until you hear a

beep in the headset. After a moment you will hear another beep in the

headset as a prompt for voice dialling and the phone display will show

“After the tone, say a name or command”

2. State the name of the contact you wish to dial and the call will be

placed.

Known Issues

1. The T610, as released (Software Version R1A081 prgCXC125-566_EU_2

R1A081 prgCXC125-566_TAE), does NOT support low power modes whilst

using the handsfree. Therefore, the standby time with this device will be very

poor (about 10 hours, rather than 200 hours). This issue can be fixed by

returning your phone to an authorised Sony-Ericsson service centre, and is free if

your phone is under warranty.

Other manuals for M3000

Other Plantronics Headset manuals

Plantronics

Plantronics BLACKWIRE C210-220 - QUICK START GUIDES User manual

Plantronics

Plantronics Blackwire C435 User manual

Plantronics

Plantronics RIG 400 Series User manual

Plantronics

Plantronics Savi W740-M User manual

Plantronics

Plantronics M100 Bluetooth User manual

Plantronics

Plantronics CT10 User manual

Plantronics

Plantronics Pulsar 590 series User manual

Plantronics

Plantronics Legend UC User manual

Plantronics

Plantronics CS50 User manual

Plantronics

Plantronics VOYAGER 835 Reference guide

Plantronics

Plantronics BlackwireC320-M User manual

Plantronics

Plantronics BackBeat PRO 2 User manual

Plantronics

Plantronics Blackwire 600 Dimensions

Plantronics

Plantronics EncorePro HW510 User manual

Plantronics

Plantronics EXPLORER 230 User manual

Plantronics

Plantronics DA55 USB Dimensions

Plantronics

Plantronics Blackwire 600 User manual

Plantronics

Plantronics Pulsar 590 series User manual

Plantronics

Plantronics SUPRAPLUS HW251N Reference guide

Plantronics

Plantronics Discovery 975 User manual

Plantronics

Plantronics Savi Office WO200 User manual

Plantronics

Plantronics RIG 700 Series User manual

Plantronics

Plantronics M2300 User manual

Plantronics

Plantronics EncorePro 79534-01 User manual

Popular Headset manuals by other brands

Sena

Sena SMH10 quick start guide

IASUS

IASUS Stealth IA-NT4-BASIC-BT manual

Sennheiser

Sennheiser EPOS ADAPT 230 user guide

Doro

Doro Flexus HS2005 user guide

GE 98971 datasheet

Hama

Hama 00184070 quick start guide

Blue Tiger

Blue Tiger Advantage PLUS user manual

Jawbone

Jawbone Icon user manual

Jabra

Jabra FR 20 user guide

Roxcore

Roxcore Flow A+ manual

Turtle Beach

Turtle Beach XP 510 user guide

Philips

Philips SHB6101 Specification sheet

Jabra

Jabra PRO 9460 Duo datasheet

HyperX

HyperX HyperX Cloud Flight manual

Bose

Bose MIE2 Mobile owner's guide

Jabra

Jabra Steel quick start guide

HyperX

HyperX cloud ii quick start guide

Southwing

Southwing SA505 Specifications