Plantronics Blackwire C510- M User manual

Getting started:

The Plantronics Blackwire headset is ready

to use with your computer and Microsoft®

Lync® 2013.

1. Connect your headset to the

computer. If this is the first time

you are connecting, wait for the

installation process to complete.

Restart the computer if directed to

do so.

Configuring Microsoft Lync 2013 to always

route call audio to the headset:

2. Click on the Options button in the

main Microsoft Lync window.

3. Select the Audio Device option.

4. Choose your Plantronics headset

for Audio Device.

5. Check the Also Ring box for

Secondary Ringer and choose your

PC speakers from the drop down

menu if you would like them to ring

for incoming calls.

6. In this screen you can also test and

adjust volumes.

7. Click Ok when finished.

Note: USB configuration settings are unique

for each USB port. If you connect the

headset to a different port you will need to

make these changes again to set behavior

for that USB port.

Blackwire®C510-M/C520-M™Quick Setup Guide

Welcome:

Using a Plantronics Blackwire headset

for PC calls will deliver a simpler, more

comfortable and better sounding audio

experience than you could get using just

your computer’s internal microphone

and speaker.

Blackwire C510-M/C520-M Key Features:

Manages PC calls with Smart Sensor™

convenience

One-touch call answer/end, vol +/-, and mute

Inline indicator lights and user friendly audio

tones alert the user to connection, mute and

volume status

PC wideband audio with noise-canceling

microphones for the best audio quality on calls

Take it on the go, with folding ear cushions

and included carrying case

Monaural (C510-M), Stereo (C520-M)

Control Functions:

A. Mute microphone

B. Volume adjust

C. Call answer/end



*This picture shows the

Stereo (C520-M) version

Making and Receiving Calls with Microsoft® Lync® 2013

To MAKE a call:

To call an existing contact, hover over the

image of the contact you’d like to call so your

communication options appear to the right

(1). Then click the phone icon to place the

call (2). You can also click the arrow next to

the phone icon and choose a different calling

option (3).

You can also enter a phone number manually

using the search box located at the top of

the main Microsoft Lync screen (4).

When a call is placed, a call window will open

and the audio will be routed to your headset.

To RECEIVE a call:

When you receive a call, a notification

window will appear in the lower right

corner of your computer screen (5).

To answer the call, simply put the

headset on. If you are already wearing

the headset, use the controls on your

headset or click on the call notification

window (6).

You can also redirect the call with one of

the choices from the options menu (7) or

ignore it (8).

©2013 Plantronics, Inc. All rights reserved. Plantronics, Smart Sensor, Blackwire, C510-M and C520-M are trademarks or registered trademarks of Plantronics, Inc. Microsoft and Lync are trademarks or registered trademarks of Microsoft Corporation in the US and

other countries. Published 03.13