Planet IGS-6325 Series User manual
Industrial L3 Rack-mount
Managed Ethernet Switch
IGS-6325 Series
Quick Installation Guide
Table of Contents
1. Package Contents ....................................................................................... 3
2. Requirements ............................................................................................. 4
3. Wiring DC Power Inputs .............................................................................. 5
4. Terminal Setup ........................................................................................... 6
4.1 Logging on to Console ......................................................................... 7
4.2 ConguringIPAddressviaConsole ....................................................... 8
5. Starting Web Management .........................................................................10
5.1 LoggingintotheIndustrialManagedSwitch.........................................10
5.2 SavingCongurationviaWeb ..............................................................13
6. RecoveringBacktoDefaultConguration.....................................................15
7. Customer Support .....................................................................................16
3
1. Package Contents
Thank you for purchasing PLANET Industrial L3 Managed Ethernet Switch.
“Industrial Managed Switch” is used as an alternative name in this Quick
InstallationGuide.
Open the box of the Industrial Managed Switch and carefully unpack it. The box
shouldcontainthefollowingitemsforeachmodel:
IGS-6325-
20T4C4X
IGS-6325-
20S4C4X
IGS-6325-
24P4X
IGS-6325-
24P4S
Quick
Installation
Guide
DB9toRJ45
Interface
RS232 Console
Cable
Rack-mount
AccessoryKit
ACPowerCord
RJ45DustCap 25 525 25
SFP Dust Cap 828 8 4
If any item is found missing or damaged, please contact your local reseller for
replacement.
4
2. Requirements
The Industrial Managed Switch provides remote login interface for management
purposes.Thefollowingequipmentisnecessaryforfurthermanagement:
zWorkstations running Windows 2003/2008/XP/Vista/7/8/10, MAC OS X or later,
Linux,UNIX,orotherplatformsarecompatiblewithTCP/IPProtocols.
zSerial Port Connection (Terminal)
The above Workstations come with COM Port (DB9) or USB-to-RS232
converter.
TheaboveWorkstationshavebeen installedwithterminal emulator,suchas
HyperTerminalincludedinWindowsXP/2003,puttyorTeraTerm.
Serial cable -- one end is attached to the RS232 serial port, while the other
endtotheconsoleportoftheIndustrialManagedSwitch.
zWorkstationsareinstalledwithEthernet NIC(NetworkInterfaceCard)
zEthernetPortConnection
Networkcables--Usestandardnetwork(UTP)cableswithRJ45connectors.
TheabovePCisinstalledwithWeb browser.
Note
It is recommended to use Internet Explorer 8.0 or above to access
the Industrial Managed Switch. If the Web interface of the Indus-
trialManagedSwitchisnot accessible,pleaseturnoff the anti-virus
softwareorfirewallandthentryitagain.
5
3. Wiring DC Power Inputs
The 6-contact terminal block connector on the panel of Industrial Managed Switch
is used for two DC redundant power inputs. Please use the correct DC input
voltageandfollowthestepsbelowtoinsertthepowerwires.
1.Insert positive and negative DC power wires into contacts 1 and 2 for DC
POWER1,or5and6forDCPOWER2.
DC POWER
ON
Ring DI/DO
Fault
AC
DC 2
DC 1
FaultDC 2DC 1
Figure 3-1: 6-contact terminal block connector of IGS-6325-20T4C4X and IGS-6325-20S4C4X
Input DC 48-56V
+
FaultDC 1 DC 2
+
Figure 3-2: 6-contact terminal block connector of IGS-6325-24P4X and IGS-6325-24P4S
2.Tightenthewire-clampscrewsforpreventingthewiresfromloosening.
123456
Power 1 Fault Power 2
+ - + -
Figure 3-3: The pins of 6-contact terminal block connector
Note
The wire gauge for the terminal block should be in the range
between12and24AWG.
6
4. Terminal Setup
To congure the system, connect a serial cable to a COM port on a PC or
notebook computer and to RJ45 type of serial port of the Industrial Managed
Switch.
Managed Switch
PC / Workstation
with
Terminal Emulation Software
Serial Port
RS232 to RJ45 Cable
Console Port
RJ45
Figure 4-1: Industrial Managed Switch Console Connectivity
A terminal program is required to make the software connection to the Industrial
ManagedSwitch.
1. Run terminal program on the OS.
2.When the following screen appears, make sure that the COM port should be
conguredas:
Baud:115200
Databits:8
Parity:None
Stopbits:1
Flowcontrol:None
Figure 4-2: COM Port Conguration
7
4.1 Logging on to Console
Once the terminal is connected to the device, power on the Industrial Managed
Switchandtheterminalwilldisplay“runningtestingprocedures”.
Then, the following message asks to log in user name and password. The factory
defaultusernameandpasswordare shownasfollowsasthelogin screeninFigure
4-3 appears.
Username:admin
Password:admin
Figure 4-3: Industrial Managed Switch Console Login Screen
The user can now enter commands to manage the Industrial Managed Switch. For
adetaileddescriptionofthecommands,pleaserefertothefollowingchapters.
Note
1.For security reason, please change and memorize the new pass-
wordafterthisfirstsetup.
2.Only accept command in lowercase letter under console inter-
face.
8
4.2 ConguringIPAddressviaConsole
TheIndustrialManagedSwitchisshippedwithdefaultIPaddressshownbelow.
IPAddress:192.168.0.100
SubnetMask:255.255.255.0
To check the current IP address or modify a new IP address for the Switch, please
usetheproceduresasfollows:
ShowthecurrentIPAddress
1.Atthe“#”prompt,enter“show ip interface brief”.
IGS-6325-20T4C4X # show ip interface brief
2.ThescreendisplaysthecurrentIPaddressasshowninFigure4-4.
Figure 4-4: IP Information Screen
ConguringIPAddress
3.At the “#” prompt, enter the following command and press <Enter> as shown
in Figure 4-5.
IGS-6325-20T4C4X # congure terminal
IGS-6325-20T4C4X(cong)#interface vlan 1
IGS-6325-20T4C4X(cong-if-vlan)#ip address 192.168.1.100 255.255.255.0
The previous command would apply the following settings for the Industrial
ManagedSwitch.
IPAddress:192.168.1.100
SubnetMask:255.255.255.0
Figure 4-5: Conguring IP Address Screen
9
4.Repeatstep1tocheckiftheIPaddressischanged.
Storingcurrentswitchconguration
5.Enterthefollowingcommandandpress<Enter>togobackto“#”prompt.
# exit
Figure 4-6: Inputting Exit Command Screen
6.Atthe“#”prompt,enterthefollowingcommandandpress<Enter>.
# copy running-cong startup-cong
Figure 4-7: Saving Current Conguration Command Screen
If the IP is successfully congured, the Industrial Managed Switch will apply the
new IP address setting immediately. You can access the Web interface of the
IndustrialManagedSwitchthroughthenewIPaddress.
Note
If you are not familiar with the console command or the related
parameter, enter “help” anytime in console to get the help
description.
10
5. Starting Web Management
The following shows how to start up the Web Management of the Industrial
Managed Switch. Note the Industrial Managed Switch is congured through an
Ethernet connection. Please make sure the manager PC must be set to the same
IP subnet address.
For example, the default IP address of the Industrial Managed Switch is
192.168.0.100, then the manager PC should be set to 192.168.0.x (where x
is a number between 1 and 254, except 100), and the default subnet mask is
255.255.255.0.
PC / Workstation
with Web Browser
192.168.0.x
Managed Switch
RJ45/UTP Cable
IP Address:
192.168.0.100
Figure 5-1: IP Management Diagram
5.1 Logging in to the Industrial Managed Switch
1.Use Internet Explorer 8.0 or above Web browser and enter IP address
http://192.168.0.100(thefactorydefaultIPaddressortheonethatyouhave
justchangedinconsole)toaccesstheWebinterface.
2.When the following dialog box appears, please enter the default user name and
password “admin” (or the password you have changed via console). The login
screen in Figure 5-2 appears.
Other manuals for IGS-6325 Series
1
This manual suits for next models
4
Table of contents
Other Planet Switch manuals
Planet
Planet KVM-210 M Series User manual
Planet
Planet XGSW-28040HP User manual
Planet
Planet IGS-10020PT User manual
Planet
Planet GSD-503 User manual
Planet
Planet IGS-5225-4T2S User manual
Planet
Planet FSD-805 User manual
Planet
Planet GSD-1020 User manual
Planet
Planet FSD-804PS User manual
Planet
Planet IGS-5225-8P4S-12V User manual
Planet
Planet VC-820M User manual
Planet
Planet POE-400 User manual
Planet
Planet FSD-1605 User manual
Planet
Planet IGS-6325-20T4C4X User manual
Planet
Planet GSW-1601 User manual
Planet
Planet UPOE-1600G User manual
Planet
Planet IGS-500T User manual
Planet
Planet NOVASwitch FNSW-8086F User manual
Planet
Planet FNSW-1608PS User manual
Planet
Planet GSW-2416SF User manual
Planet
Planet WGSW-2840 User manual
