Planet IGS-6325-5X1T User manual
Industrial L3 5-Port 10GBASE-X SFP+ + 1-Port
10GBASE-T Managed Ethernet Switch
IGS-6325-5X1T
Quick Installation Guide
Table of Contents
1. Package Contents ....................................................................................... 3
2. Requirements ............................................................................................. 4
3. Wiring the Power Inputs.............................................................................. 5
3.1 Grounding the Device .......................................................................... 6
4. Terminal Setup ........................................................................................... 7
4.1 Logging on to the Console.................................................................... 8
4.2 ConguringIPAddressviaConsole ....................................................... 8
4.3 Storingthecurrentswitchconguration ...............................................10
5. Starting Web Management .........................................................................11
5.1 Logging in to the Industrial Managed Switch.........................................11
5.2 SavingCongurationviaWeb ..............................................................14
6. RecoveringBacktoDefaultConguration.....................................................15
7. Customer Support .....................................................................................16
3
1. Package Contents
Thank you for purchasing PLANET L3 Industrial Managed Switch, IGS-6325-5X1T.
“Industrial Managed Switch” mentioned in this Quick Installation Guide refers
to the above model.
Open the box of the Industrial Managed Switch and carefully unpack it. The
box should contain the following items:
IGS-6325-5X1T
The Industrial Managed Switch
DB9 to RJ45 Interface RS232 Console Cable
Quick Installation Guide
Wall Mounting Kit
RJ45 Dust Cap 2
SFP Dust Cap 5
Ifanyof theseare missingor damaged,pleasecontact yourdealer immediately. If
possible, retain the carton including the original packing materials to enable you to
repack the product in case there is a need to return it to us for repair.
4
2. Requirements
The Industrial Managed Switch provides remote login interface for management
purposes. The following equipment is necessary for further management:
zWorkstations running Windows XP/2003/2008/Vista/7/8/10/11, MAC OS X or
later,Linux,UNIX,orotherplatformsarecompatiblewithTCP/IPProtocols.
zWorkstationsareinstalledwithEthernetNIC(NetworkInterfaceCard).
zSerial Port Connection(Terminal)
The above Workstations come with COM Port (DB9) or USB-to-RS232
converte.
The above Workstations have been installed with terminal emulator,such as
HyperTerminalincludedinWindowsXP/2003,puttyorteraterm.
Serial cable -- one end is attached to the RS232 serial port, while the other
end to the console port of the Industrial Managed Switch.
zEthernet Port Connection
Network cables--Usestandardnetwork(UTP)cableswithRJ45connectors.
The above PC is installed with Web browser.
Note
It is recommended to use Chrome 98.0.xxx or above to access the
Industrial Managed Switch.
5
3. Wiring the Power Inputs
The Upper Panel of the Industrial Managed Switch indicates an inlet power
socket and consists of one green terminal block connector within 6 contacts. Please
follow the steps below to insert the power wire.
1.Insert positive/negative DC power wires into Contacts 1 and 2 for Power 1, or
Contacts 5 and 6 for Power 2.
DC9-48V,AC24V
Max. Fault Alarm Loading: 24V, 1A
DI1 DO0 DO1DI0 GNDGND
V1+ V2+
PWR1 PWR2Alarm
DC Input: 9-48V
, 4A max.
AC Input: 24V
, 2A max.
1 2 3 4 5 6
1 2 3 4 5 6
Figure 3-1: IGS-6325-5X1T Upper Panel
2.Tightenthewire-clampscrewsforpreventingthewiresfromloosening.
123456
V1+ V1- V2+ V2-
Power 1 Power 2
Figure 3-2: Power1 & 2 Pins of Terminal Block Connector
Note
1. The wire gauge for the terminal block should be in the range
from 12 to 24 AWG.
2.Please check the AWG Ampere specification before connecting
PLANETIndustrialManagedSwitch.
6
3.1 Grounding the Device
Users MUST complete grounding wired with the device; otherwise, a sudden lightning could
cause fatal damage to the device.
Max. Fault Alarm Loading: 24V, 1A
DI1 DO0 DO1DI0 GNDGND
V1+ V2+
PWR1 PWR2Alarm
DC Input: 9-48V
, 4A max.
AC Input: 24V
, 2A max.
1 2 3 4 5 6
1 2 3 4 5 6
Earth Ground
7
4. Terminal Setup
Tocongurethesystem,connect a serialcabletoa COM port on a PC or notebook
computerandtoRJ45typeserial(console)portoftheIndustrialManagedSwitch.
PC/Workstation with
Terminal Emulation Software
Serial Port
Console Port
115200,N,8,1
IGS Industrial Managed Switch
Console
115200,N,8,1
RJ45 to DB9 RS232 Cable
A terminal program is required to make the software connected to the Industrial
Managed Switch.
1. Run terminal program on the OS.
2.When the following screen appears, make sure that the COM port should be
conguredas:
Baud: 115200
Parity:None
Data bits: 8
Stop bits: 1
Flowcontrol:None
8
4.1 Logging on to the Console
Once the terminal has been connected to the device, power on the Industrial
Managed Switch and the terminal will display “running testing procedures”.
Then, the following message asks to log in user name and password. The factory
default user name and password are shown as follows as the login screen in Figure
4-1appears.
Username:admin
Password: admin
Figure 4-1: Console Login Screen
The user can now enter commands to manage the Industrial Managed Switch. For
adetaileddescriptionofthecommands,pleaserefertothefollowingchapters.
Note
1.For security reason, please change and memorize the new
password after this first setup.
2. Only accept command in lowercase letter under console inter-
face.
4.2 ConguringIPAddressviaConsole
The Industrial Managed Switch is shipped with default IP address shown below:
IPAddress:192.168.0.100
Subnet Mask: 255.255.255.0
9
To check the current IP address or modify a new IP address for the Switch, please
use the procedure as follows:
Display of the Current IP Address
1.Atthe“#”prompt,enter“show ip interface brief”.
IGS-6325-Series#show ip interface brief
2.ThescreendisplaysthecurrentIPaddressshowninFigure4-2.
Figure 4-2: IP Information Screen
CongurationoftheIPAddress
3.At the “#” prompt, enter the following command and press <Enter> as shown
inFigure4-3.
IGS-6325-Series#congureterminal
IGS-6325-Series(cong)# interface vlan 1
IGS-6325-Series(cong-if-vlan)# ip address 192.168.1.100 255.255.255.0
The previous command would apply the following settings for the Industrial
Managed Switch.
IPAddress:192.168.1.100
Subnet Mask: 255.255.255.0
Figure 4-3: Conguring IP Address Screen
10
4. Repeat step 1 to check if the IP address has changed.
4.3 Storingthecurrentswitchconguration
1.Atthe“#”prompt,enterthefollowingcommandandpress<Enter>.
#copyrunning-congstartup-cong
Figure 4-4: Saving Current Conguration Command Screen
If the IP is successfully congured, the Industrial Managed Switch will apply the
new IP address setting immediately. You can access the Web interface of the
Industrial Managed Switch through the new IP address.
Note
If you are not familiar with the console command or the related
parameter, enter “help” anytime in console to get the help
description.
This manual suits for next models
8
Table of contents
Other Planet Switch manuals
Planet
Planet ISW-500 User manual
Planet
Planet GSD-800 User manual
Planet
Planet GSD-1008HP User manual
Planet
Planet IGS-501T User manual
Planet
Planet SGSW-24040R User manual
Planet
Planet KVM-810 User manual
Planet
Planet KVM-800 User manual
Planet
Planet IGS-5227X-4P2T User manual
Planet
Planet NOVASwitch GSW-800S User manual
Planet
Planet GS-4210 SERIES User manual
Planet
Planet IDL-2402 User manual
Planet
Planet MGSW-24160F User manual
Planet
Planet NOVASwitch FNSW-8086F User manual
Planet
Planet POE-1200 User manual
Planet
Planet ISW-511 Series User manual
Planet
Planet SGSW-24040 User manual
Planet
Planet IKVM-8020 User manual
Planet
Planet GSD-804P User manual
Planet
Planet POE-400 User manual
Planet
Planet FSD-604HP User manual
