Planet IGS-5227X-4P2T User manual
Industrial IP67-rated 4-Port 10/100/1000T 802.3at PoE
+ 2-Port 10/100/1000T Managed Ethernet Switch
IGS-5227X-4P2T
Quick Installation Guide
Table of Contents
1. Package Contents ....................................................................................... 3
2. M12 X-coded Connector Pin Assignment ....................................................... 4
3. M12 (8-pin, X-coded Male) to RJ45 (8-pin) Straight-through UTP Cabling ........ 5
4. Connecting M12 Cable to the Industrial Managed PoE+ Switch ....................... 6
5. M23 DC Power Cable Pin Assignment ........................................................... 8
6. Requirements ............................................................................................. 9
7. Starting Web Management .........................................................................10
7.1 Logging in to the Industrial Managed PoE+ Switch ................................11
7.2 SavingConguration...........................................................................13
8. RecoveringBacktoDefaultConguration.....................................................14
9. Customer Support .....................................................................................15
3
1. Package Contents
Thank you for purchasing PLANET Industrial IP67-rated 4-Port 10/100/1000T
802.3at PoE + 2-Port 10/100/1000T Managed Ethernet Switch.
“Industrial Managed PoE+ Switch” mentioned in this Quick Installation Guide
refers to the above model.
Open the box of the Industrial Managed PoE+ Switch and carefully unpack it. The
box should contain the following items:
Item/Model IGS-5227X-4P2T
The Industrial Managed PoE+ Switch 1
Quick Installation Guide 1
Waterproof/dustproof Power Cap 1
Waterproof/dustproof M12 Caps 6
2m 8-pin X-coded M12-to-RJ45 UTP Cable 1
DIN-rail Kit
Wall-mount Kit
If any item is found missing or damaged, please contact your local reseller for
replacement.
4
2. M12 X-coded Connector Pin Assignment
The Industrial Managed PoE+ Switch front panel provides six 10/100/1000BASE-T
Ethernet ports in the form of M12 8-pin X-coded female connector. These ports
are designed for Ethernet equipment connection through Cat5/5e UTP cables. The
M12 8-pin X-coded input interface pinout is shown below:
Pin Con
1DA+
2DA
5
8
3DB+
6
7
DD+
DD
DC
DB4
DC+
6
3
7
2
4
5
1
8
8-pin M12 X-coded Female 10/100/1000T Connector Pin Assignment
5
3. M12 (8-pin, X-coded Male) to RJ45 (8-pin)
Straight-through UTP Cabling
M12 X-coded Male
Connector Pin No.
MDI
1000BASE-T Signal ID T568B Color RJ45 Connector
Pin No
1BI_DA+ white/orange 1
2BI_DA- orange 2
3BI_DB+ white/green 3
4BI_DB- green 6
5BI_DD+ white/brown 7
6BI_DD- brown 8
7BI_DC- White/blue 5
8BI_DC+ blue 4
Note
As each Ethernet port of the Industrial Managed PoE+ Switch is
running in auto negotiation mode, make sure the Ethernet ports of
the corresponding Ethernet devices are also running in auto nego-
tiation mode; otherwise, the Ethernet performance will be poor.
6
4. Connecting M12 Cable to the Industrial Managed
PoE+ Switch
Step 1: Turn counterclockwise to remove the waterproof caps of an M12
connector and M23 power input.
Step 2: Insert the M12 UTP male connector into the M12 female Gigabit Ethernet
port of the Industrial Managed PoE+ Switch.
Step 3: Turn clockwise to tighten the connection to the M12 connector.
7
Step 4: Insert the M23 power female connector into the M23 male port of the
power input.
Note
The box doesn’t contain the M23 5-pin A-coded female
connector power cable.
Step 5: Turn clockwise to tighten the connection to the M23 power connector.
Caution
To have the waterproof effect, connectors must be totally tight-
ened, otherwise, it would invalidate your warranty.
Note
Before connecting the DC power cord, please check whether your
local DC power source is stable.
8
5. M23 DC Power Cable Pin Assignment
The front panel of the Industrial Managed PoE+ Switch provides one M23 DC
power 5-pin male connector for DC power input. Please use the power cable with
the M23 DC power 5-pin female connector from the Industrial Managed PoE+
Switch package for DC power input. The M23 DC power cable pin assignment is
shown below:
Note
1. The box doesn’t contain the M23 5-pin A-coded female
connector power cable.
2. Please contact your local reseller to purchase CB-M23F5F-120
from PLANET.
V1−
V1+
V2−
V2+
CB-M23F5F-120 M23 DC power cable pin assignment and wiring code
V1−
V1+
V2−
V2+
V1 positive (+) pin = white cable
V1 negative (-) pin = brown cable
V2 positive (+) pin = black cable
V2 negative (-) pin = yellow cable
Note
A. Make sure you connect the correct power pin to your DC power
source.
1. The wire gauge for the power cable should be in the range of
12 ~ 24 AWG
2. The DC power input range is 12 ~ 56V DC.
B. There are two methods to install the Industrial Managed PoE+
Switch – DIN-rail mounting and wall-mount plate mounting. For
more detailed information, please refer to the user’s manual.
9
6. Requirements
zWorkstations running Windows XP/2003/2008/2012/Vista/7/8/10, MAC OS X or
later, Linux, UNIX, or other platforms are compatible with TCP/IP protocols.
zEthernet Port Connection
Workstations are installed with Ethernet NIC (Network Interface Card)
Network cables -- Use standard network (UTP) cables with RJ45 connectors.
The above PC is installed with Web browser.
Note
It is recommended to use Internet Explorer 8.0 or above to access
the Industrial Managed PoE+ Switch. If the Web interface of the
Industrial Managed PoE+ Switch is not accessible, please turn off
the anti-virus software or firewall and then try it again.
10
7. Starting Web Management
The following shows how to start up the Web Management of the Industrial
Managed PoE+ Switch. Note the Industrial Managed PoE+ Switch is congured
through an Ethernet connection. Please make sure the manager PC must be set to
the same IP subnet address.
For example, the default IP address of the Industrial Managed PoE+ Switch is
192.168.0.100, then the manager PC should be set to 192.168.0.x (where x
is a number between 1 and 254, except 100), and the default subnet mask is
255.255.255.0.
IP Address:
192.168.0.x
IP Address:
192.168.0.100
IGS-5227X-4P2T
RJ45/UTP Cable
Figure 7-1: IP Management Diagram
Table of contents
Other Planet Switch manuals
Planet
Planet FGSW-2612PVS User manual
Planet
Planet VC-820M User manual
Planet
Planet XGS-6320-8UP4X User manual
Planet
Planet GSW-2416SF User manual
Planet
Planet WGSD-1022 User manual
Planet
Planet POE-1200 User manual
Planet
Planet KVM-201 User manual
Planet
Planet SW-502 User manual
Planet
Planet GS-6320-46S2C4XR User manual
Planet
Planet WGSW-14020 User manual
Planet
Planet GS-5220 Series User manual
Planet
Planet FSD-624SF User manual
Planet
Planet FGSW-1820CS User manual
Planet
Planet FSD-604HP User manual
Planet
Planet WGS-4215-8P2S User manual
Planet
Planet FSD-1605 User manual
Planet
Planet GSD-1002M User manual
Planet
Planet GS-4210 SERIES User manual
Planet
Planet IFGS-1822TF User manual
Planet
Planet SGSD-1022 User manual
