Planet GS-4210 SERIES User manual
L2/L4 Managed Gigabit Ethernet Switch
GS-4210 Series
Quick Installation Guide
Table of Contents
1. Introduction ............................................................................................... 3
2. Package Contents ....................................................................................... 4
3. Requirements ............................................................................................. 5
4. Starting Web Management .......................................................................... 6
4.1 Logging in to the Managed Switch ........................................................ 6
4.2 SavingCongurationviatheWeb ......................................................... 8
5. Terminal Setup ........................................................................................... 9
5.1 Logging on to Console ........................................................................10
5.2 ConguringIPAddress........................................................................10
5.3 SavingtheCongurationviatheConsole..............................................12
6. RecoveringBacktoDefaultConguration.....................................................13
7. Customer Support .....................................................................................15
3
1. Introduction
Thank you for purchasing PLANET L2/L4 Managed Gigabit Ethernet Switch. The
followingistheGS-4210series:
GS-4210-8P2S 8-Port10/100/1000T802.3atPoE+2-Port100/1000XSFP
Managed Switch (120W)
GS-4210-8P2T2S 8-Port10/100/1000T802.3atPoE+2-Port10/100/1000T
+2-Port100/1000XSFPManagedSwitch(240W)
GS-4210-16P4C 16-Port10/100/1000T802.3atPoE+4-PortGigabitTP/SFP
Combo Managed Switch (220W)
GS-4210-24P4C 24-Port10/100/1000T802.3atPoE+4-PortGigabitTP/SFP
Combo Managed Switch (220W)
GS-4210-24PL4C 24-Port10/100/1000T802.3atPoE+4-PortGigabitTP/SFP
Combo Managed Switch (440W)
GS-4210-48T4S 48-Port10/100/1000T+4-Port100/1000XSFPManaged
GigabitSwitch
GS-4210-48P4S 48-Port10/100/1000T802.3atPoE+4-Port100/1000X
SFPManagedSwitch(400W)
“Managed Switch” is used as an alternative name in this Quick Installation
Guide.
4
Open the box of the Managed Switch and carefully unpack it. The box should
containthefollowingitems:
2. Package Contents
Model Series GS-4210-
ModelName
Packaged Items
8P2S 8P2T2S 16P4C 24P4C/
24PL4C
48T4S/
48P4S
The Managed Switch
QuickInstallationGuide
RS232 to RJ45 Console
Cable -
-
RubberFeet
TwoRack-mountingBrackets
withAttachmentScrews
Power Cord
SFPDustCaps 2 2 4 4 4
If any item is found missing or damaged, please contact your local reseller for
replacement.
5
3. Requirements
zWorkstations running Windows 10/XP/2003/Vista/7/8/2008, MAC OS X or later,
Linux,UNIX,orotherplatformsarecompatiblewithTCP/IPprotocols.
zWorkstationsareinstalledwithEthernetNIC(NetworkInterfaceCard)
zSerial Port Connection (Terminal)
The above Workstations come with COM Port (DB9) or USB-to-RS-232
converter.
The above Workstations have been installed with terminal emulator, such as
TeraTerm,PuTTYorHyperTerminalincludedinWindowsXP/2003.
Serial cable--OneendisattachedtotheRS-232serialport,whiletheother
end to the console port of the Managed Switch.
zEthernet Port Connection
Network cables--Usestandardnetwork(UTP)cableswithRJ45connectors.
The above PC is installed with Web browser.
Note
It is recommended to use Internet Explorer 8.0 or above to access
the Managed Switch. If the Web interface of the Managed Switch
is not accessible, please turn off the anti-virus software or firewall
and then try it again.
6
4. Starting Web Management
The following shows how to start up the Web Management of the Managed
Switch. Note the Managed Switch is congured through an Ethernet connection.
Please make sure the manager PC must be set to the same IP subnet address.
For example, the default IP address of the Managed Switch is 192.168.0.100,
then the manager PC should be set to 192.168.0.x (where x is a number
between 1 and 254, except 100), and the default subnet mask is 255.255.255.0.
PC / Workstation
with Web Browser
192.168.0.x
Managed Switch
RJ45/UTP Cable
IP Address: 192.168.0.100
Figure 4-1: IP Management Diagram
4.1 Logging in to the Managed Switch
1.Use Internet Explorer 8.0 or above Web browser and enter IP address
http://192.168.0.100 to access the Web interface.
2. When the following dialog box appears, please enter the default user name and
password “admin”.TheloginscreeninFigure4-2appears.
DefaultIPAddress:192.168.0.100
DefaultUsername:admin
DefaultPassword:admin
Figure 4-2: Login Screen
7
Note
Thefollowing webscreenbased onGS-4210-8P2Swill be thesame
asthatofGS-4210series.
3.Afterenteringthepassword,themainscreenappearsasFigure4-3shows.
Figure 4-3: Web Main Screen of Managed Switch
The Switch Menu on the top of the Web page lets you access all the commands
and statistics the Managed Switch provides. The Switch Menu always contains one
or more buttons, such as “System”, “Switching”, “QoS”, “Security”, “PoE”
and “Maintenance”.
Figure 4-4: Switch Menu
8
Figure 4-5: Switch Menu
Now, you can use the Web management interface to continue the Switch
management.
Please refer to the user’s manual for more.
4.2 SavingCongurationviatheWeb
To save all applied changes and set the current conguration as a startup
conguration on the Web user interface, the startup-conguration le will be
loaded automatically across a system reboot.
1. Click the Save icon on the top Switch Menu bar.
Figure 4-6: Save Cong -- Hot key
2. Press the “Apply” button to save running conguration to start up congura-
tion.
Figure 4-7: Save Cong -- Maintenance
9
5. Terminal Setup
The GS-4210-8P2T2S, GS-4210-16P4C, GS-4210-24P4C and GS-4210-24PL4C
are equipped with a console interface for local switch setup and maintenance. To
congure the system, connect a serial cable to a COM port on a PC or notebook
computer and to the RJ45 type of the console port of the Managed Switch.
Managed Switch
PC / Workstation
with
Terminal Emulation Software
Serial Port
RS232 to RJ45 Cable
Console Port
RJ45
Figure 5-1: Managed Switch Console Connectivity
A terminal program is required to make the software connection to the Managed
Switch.
1. Run terminal program on the OS.
2. When the following screen appears, make sure that the COM port should be
conguredas:
zBaud:115200
zDatabits:8
zParity:None
zStopbits:1
zFlowcontrol:None
Figure 5-2 COM Port Conguration
Note
Console interface is not available for the GS-4210-8P2S and
GS-4210-48P4S.
10
5.1 Logging on to Console
Once the terminal is connected to the device, power on the Managed Switch and
the terminal will display “running testing procedures”. Then, the following message
asks to log in user name and password. The factory default user name and
passwordareshownasfollows,andtheloginscreeninFigure5-3appears.
Username:admin
Password:admin
Figure 5-3: Managed Switch Console Login Screen
The user can now enter commands to manage the Managed Switch. For a detailed
description of the commands, please refer to the following chapters.
Note
1.For security reason, please change and memorize the new pass-
word after this first setup.
2.Only accept command in lowercase letter under console interface.
5.2 ConguringIPAddress
TheManagedSwitchisshippedwithdefaultIPaddressasfollows:
IPAddress:192.168.0.100
SubnetMask:255.255.255.0
Other manuals for GS-4210 SERIES
2
This manual suits for next models
7
Table of contents
Other Planet Switch manuals
Planet
Planet FSD-1600 User manual
Planet
Planet GSD-1020 User manual
Planet
Planet GSD-801 User manual
Planet
Planet UPOE-1600G User manual
Planet
Planet GS-5220-16S8C User manual
Planet
Planet FSD-504HP User manual
Planet
Planet FNSW-2402 User manual
Planet
Planet GSW-1602SF User manual
Planet
Planet WGS-6325-8UP2X User manual
Planet
Planet WGSW-48040HP User manual
Planet
Planet WGSD-910 User manual
Planet
Planet GSW-1602SF User manual
Planet
Planet FGSW-2402S User manual
Planet
Planet FGSW-2401 User manual
Planet
Planet WGSW-24040 User manual
Planet
Planet IPM-8221 User manual
Planet
Planet FSD-804P User manual
Planet
Planet SGSW-24040 User manual
Planet
Planet IGS-6325-20T4C4X User manual
Planet
Planet SGSW-24040 User manual
