Planet WNRT-625G User manual

802.11n 3G Broadband Router

WNRT-625G

Quick Installation Guide

Table of Contents

Package Content............................................................................. 3

Hardware Installation ...................................................................... 4

Other outlook interface.................................................................... 6

Web Conguration .......................................................................... 8

Further Conguration................................................................12

3

Package Content

1 x WNRT-625G

1 x Stand

1 x Ethernet Cable

1 x Power Adapter

1 x CD ROM

1 x Quick Installation Guide

Note

If any of the above items are missing or damaged,

contact your local dealer for support.

l

l

l

l

l

l

4

Hardware Installation

1. Locate an optimum location for the WNRT-625G.

2. Adjust the antennas of WNRT-625G for the best coverage of your

wireless network.

3. There are two way connecting to Internet, One is via 3G USB port,

and another is from WAN port.

3-1. Connect your 3G/3.5G USB modem to the USB port located in

front panel of WNRT-625G.

Note

Please also check with your local dealer or PLANET Web

site for supported 3G/3.5G USB adapter.

3-2. Connect ADSL/Cable Modem to WAN port of WNRT-625G via RJ-

45 Ethernet cable

5

4. Connect all your computers, network devices (network-enabled

consumer devices, like game console, or switch / hub) to LAN port of

WNRT-625G.

5. Connect the power adapter to the wall socket, and then connect it to

the ‘12V DC’ socket of WNRT-625G.

6. Please check all LEDs on the front panel. ‘PWR’ LED should be

steadily on.

6

Other outlook interface

Radio ON/OFF

Enable/disable wireless signal button.

** In case switching wireless signal via “Radio ON/

OFF” button to “OFF” status, the functions of

wireless settings on web UI will be unavailable.

7

RST / WPS

Button

This button has two functions:

1. To Clear All Data and restore the factory

default values:

Press the RST (reset) button for longer than 20

seconds until the LED of power ash, and then the

router will reset itself to the factory default settings.

(Warning: your original congurations will be

replaced with the factory default settings)

2. To make Wi-Fi Protected Setup (WPS) simple

and easier:

Press the WPS button (for less than 3 seconds);

machine will start WPS function to build connection

between wireless network clients and this wireless

router.

8

Web Conguration

WNRT-625G provides a user friendly interface for users to congure

it via web browser. Please follow the steps below to congure WNRT-

625G basic settings.

1. Open your web browser and type WNRT-625G default IP address

(http://192.168.0.1) into the “Address Field” of you web browser.

Before conguration, please make sure your PC’s IP address is under

the same IP range with WNRT-625G.

2. After enter the IP address and press Enter key, you can see the

dialog box appear as below, please enter the User name and Pass-

word with “admin”. Then press “OK”.

9

3. Please click “Quick Setup” on the left panel to setup WNRT-625G.

4. Select a Time Zone that corresponds to your country. Click “Next” to

continue.

10

5. WNRT-625G supports 7 Internet connection types. Please click

“3G/3.5G” to congure 3G mobile Internet. (Other methods please

refer to the manual in CD-ROM.

6. Please input the Internet connection parameters if it is required by

your 3G/3.5G Service Provider. Click “Next” to continue.

Other manuals for WNRT-625G

2

Table of contents

Other Planet Network Router manuals

Popular Network Router manuals by other brands

Allnet

Allnet ALL0333AU user guide

HomeSeer

HomeSeer HT-SEL Getting started guide

Sercomm

Sercomm Genesis OC3505D Quick installation guide

Billion

Billion BIPAC 5102 Series user manual

TP-Link

TP-Link TD-8817 QIG

Motorola

Motorola MR1900 user guide

Digi

Digi IX14 user guide

Cisco

Cisco NCS 540 Hardware installation guide

XAVi

XAVi X8821e user manual

BEC

BEC 6200WZL Quick installation guide

MikroTik

MikroTik hAP ac3 Series quick start

Korenix

Korenix JetNet 5428G Series user manual

NETGEAR

NETGEAR FS526T - Switch installation guide

Korenix

Korenix JetNet 5710G Series user manual

Automated Logic

Automated Logic ZN551 Technical instructions

Cisco

Cisco ASR 1000 Series Installation and configuration guide

EnGenius

EnGenius ESR-9710 quick start guide

Cisco

Cisco 805 Series Product overview