Planet SG-4800 User manual
Gigabit SSL VPN Security Router
SG-4800
Quick Installation Guide
Table of Contents
1. Package Contents ....................................................................................... 3
2. Hardware Installation .................................................................................. 4
2.1 Safety Instruction ................................................................................ 4
2.2 Front panel ......................................................................................... 4
2.3 LED&Buttondenition........................................................................ 5
2.4 Placement........................................................................................... 5
2.5 Network Connection............................................................................. 6
3. BasicSystemConguration ......................................................................... 7
3.1 Web Login .......................................................................................... 7
3.2 ConguringtheWAN ........................................................................... 8
3.3 Remote Management ..........................................................................10
4. Furtherconguration..................................................................................12
3
1. Package Contents
Thank you for purchasing PLANET Gigabit Multi-Homing VPN Security Router, SG-
4800,andthisQuickInstallationGuidewillintroducehowtonishthebasicsetting
to connect the internet. Open the box of the VPN Security Router and carefully
unpackit.Theboxshouldcontainthefollowingitems:
SG-4800x1l
QuickInstallationGuidex1l
User’sManualCDx1l
PowerCordx1l
Cat5Cablex1l
19inchesBracketsx2l
BracketScrewx8l
If any of above items are damaged or missing, please contact your dealer
immediately.
4
2. Hardware Installation
The followings are instructions for setting up PLANET SG-4800. Refer to the
illustration and follow the simple steps below to quickly install your VPN Security
Router.
2.1 Safety Instruction
ThefollowingisthesafetyinstructionsforVPNSecurityRouterbeforeinstalling.
Themaximumoperatingtemperatureofthe routeris50ºC.Care must be taken
toallowsufcientaircirculation.
The connections and equipment that supply power to the router should be
capableofoperatingsafelywiththemaximumpowerrequirementsoftherouter.
In the event of a power overload, the supply circuits and supply wiring should
notbecomehazardous.
The AC power cord must plug into the right supply voltage. Make sure that the
supplied AC voltage is correct and stable. If the input AC voltage is over 10%
lowerthanthestandardmaycausetheroutertomalfunction.
Generally, when installed after the nal conguration, the product must comply
with the applicable safety standards and regulatory requirements of the country
inwhichitisinstalled.Ifnecessary,consultfortechnicalsupport.
2.2 Front panel
Figure 2-1 Front Panel of the SG-4800
Power Indicator:Lightsupwhenthepowerison.
DIAG Indicator:Glitterswhensystemisonself-testafterpoweronthedevice.
Ethernet Port can be set as a:
LAN Port:lTheSecurityRoutersupports8LANport.
WAN Port:lTheSecurityRoutersupports4WANports.
DMZ Port:lTheSecurityRoutersupports1DMZport.
5
2.3 LED&Buttondenition
LED Color Status Description
PWR Green Steady PowerOn
Off Off PowerOff
DIAG Amber
SteadyOn Systemiscrashed.
Blinking Systemisonself-testafterpoweronthe
device.
Off System is ready.
WAN/DMZ
LINK/ACT Green
SteadyOn Porthasbeenconnected&getsIP.
Blinking Transmit data.
Off NotgettheIPaddress,eventheporthas
been connected.
LAN
LINK/ACT Green SteadyOn LANporthasbeenconnected.
Blinking Transmit data.
LAN/
WAN/DMZ
Speed
Green SteadyOn Works on 1000Mbps.
Amber SteadyOn Works on 100Mbps.
Off Off Works on 10Mbps.
Button Action Description
Reset
Press for 5 Secs Warm Start
DIAGindicator:AmberLEDashingslowly.
PressOver10Secs Factory Default
DIAGindicator:AmberLEDashingquickly.
2.4 Placement
Makesurethedeviceisplacedinasafeenvironmenttoavoidequipmentfailure.
DONOTplaceanythingontopofthedevice.Excessiveweightcoulddamageit.l
DO NOT obstruct ventilation slots on each side of the router or expose it tol
direct sunlight or other heat source. Be sure that there is adequate air ow
aroundtherouter.
Placetherouteronaatsurfacetoavoidanydamage.l
6
2.5 Network Connection
SSL VPN Tunnel
Modem
ADSL
PC SG-4800
Vendor
Headquarters Action Office
Branch Offices
Mail-ServerWeb-Server
DMZ
Access Point
Firewall GatewayFirewall Gateway
Modem
Modem
Modem
PC
PC Group
PC
PC
Laptop
Firewall Firewall
ADSL
ADSL
a/n
PPTP VPN Tunnel
IPSec VPN Tunnel
IPSec VPN Tunnel
ADSL 2/2+
ADSL
VDSL2
VDSL2
100Base-TX UTP
1000Base-T UTP
5GHz 802.11a/n
a/n
VDSL2VDSL2
Action Office
Internet
Finance-Server
Figure 2-2 Topology of the SG-4800
7
3.BasicSystemConguration
3.1 Web Login
Step 1. Connect a computer to a LAN port on the router. Your PC (DHCP client
mode) will obtain an IP address automatically. (It is usually in the
192.168.1.xrange.)
Step 2. Start a web browser. To use the user interface, you need a PC with
InternetExplorer(version6andhigher),Firefox,orSafari(forMac).
Step 3. Enter the default IP address of the router: 192.168.1.1 into the URL
addressbox.
Step 4. Enterthedefaultusernameadminandthedefaultpasswordadmin.Then
clickLogintoenterWeb-baseduserinterface.
Figure 3-1 Login page of the SG-4800
DefaultLANIP:192.168.1.1
DefaultName:admin
DefaultPassword:admin
8
3.2 ConguringtheWAN
Step 1. GotoNetwork NetworkConnectiontondWAN Setting.
Figure 3-2 Network connection button
Figure 3-3 Multi-WAN interface setting page
9
Step 2. ClickEdittoenterWANcongurationpage.
Figure 3-4 WAN conguration page
There are six types of WAN connection. They are Obtain an IP automatically,
Static IP, PPPoE (Point-to-Point Protocol over Ethernet), PPTP (Point-to-Point
Tunneling Protocol), Transparent Bridge or Router Plus NAT Mode. Users
can choose according to their actual network structure. You can nd detail setting
processintheusermanual.
Figure 3-5 WAN connection type selection item
10
3.3 Remote Management
Thefunctioncanenableuserstomanagethesecurityrouteratremotesitesandto
allowtechnicalpersontoassistyouinsolvingnetworkproblem.
Step 1. GotoFirewall General Policy.
Figure 3-6 The rewall setting button
Figure 3-7 General Policy setting page
Step 2. Click Enable to active Remote Management. And then enter the control
portyouwanttouse.Thedefaultvalueis8080.
Step 3. Click Applytosavetheconguration.Andyoucantypethehttp://WAN
IP address: 8080toaccesstherouterfromtheremoteside.
Other manuals for SG-4800
1
Table of contents
Other Planet Network Router manuals
Planet
Planet VC-230 User manual
Planet
Planet ADE-3100 User manual
Planet
Planet GSW-2416 User manual
Planet
Planet 85M Powerline to Ethernet Bridge with 4-Port Switch... User manual
Planet
Planet FWA-2100-NR User manual
Planet
Planet VC-230 User manual
Planet
Planet VIP-462DG User manual
Planet
Planet ADSL 2/2+ Router with USB Port ADE-3410v2 User manual
Planet
Planet IAD-200 User manual
Planet
Planet ADE-3400 User manual
Planet
Planet FSD-805 User manual
Planet
Planet ISW-621 Series User manual
Planet
Planet WDAP-C7210E User manual
Planet
Planet IVR-100 Series User manual
Planet
Planet GRT-101 User manual
Planet
Planet ERT-805 User manual
Planet
Planet ADE-4110 User manual
Planet
Planet IGS-5225-16T4S User manual
Planet
Planet ERT-805 User manual
Planet
Planet WNAP-7335 User manual
