PLANEPRINT Slingsby T31 Cadet Programming manual
PRINTING & ASSEMBLING MANUAL
PRINTING & ASSEMBLING MANUAL
PRINTING & ASSEMBLING MANUAL
Glider version/Hidden EDF version
NOTE: Slicing only
works with CURA!
www.planeprint.com
the ONLY place where you can get
original Planeprint STL files legally!
SLINGSBY T31 CADET 2
PRINTING & ASSEMBLING MANUAL
© PLANEPRINT
PLALW-PLA TPU CARBON
SLINGSBY T31 CADET 3
PRINTING & ASSEMBLING MANUAL
© PLANEPRINT
Required accessoires – basic equipment
• LW-PLA (cannot be replaced by PLA!), ~750 grams
• PLA oder bether Tough PLA, ~250 grams
• TPU A95, ~30 grams
• some tapping screws Ø2 mm
• Metal screw 3*20mm, 5 pieces (2 nuts included)
• CA super glue (liquid and liquid medium)
• CA activator
• UHU All Purpose Adhesive glue (or equivalent)
• Carbon tube Ø8*1000mm, 1 piece
• Carbon tube Ø6*1000mm, 1 piece
• Carbon rod Ø2.5*1000mm (also possible Ø2mm), 2 pieces
• Steel wire Ø0.8*1000mm (or Ø1mm), 2 pieces
• Rod connection, 5 pieces
• Servo extension cable 500mm, 4 pieces (or a soldered servo cable extension)
• Self-adhesive Velcro tape
• Some lead (depending on the weight of the battery)
• MPX Connector, 1 piece
• Overhead foil (or binding cover of scripts, office trade)
• Small cable ties
Tools
Cutter knife, small Philips screwdriver, Sandpaper, Metal saw, Needle nose pliers, Soldering tool
RC Components
ENGINE 4S EDF 50 MM – (We use the FMS), but it also works well with 3S.
BEC-CONTROLLER suitable for your EDF
BATTERY 4S LiPo-Akku, 2500 – 3000 mAh (ideal weight 300g)
RECEIVER 5 Channel (Glider Version)/6 Channel (EDF Version)
SERVOS 5 pieces like MODSTER MEX 55MG BB, Corona 929MG, 939MG, Hitec HS-5070MH or equivalent
Maximum dimensions::
max. 30 mm max. 14 mm
max. 35 mm
(simply search for:
M2 flat head tapping
screw assortment)
SLINGSBY T31 CADET
4
PRINTING & ASSEMBLING MANUAL
© PLANEPRINT
Printing the parts – Printing profiles
For the new PROFILE P5_Gyroid it is essential to use Cura Version 5 or later, It will work with
older versions, but the weight of the parts will be higher and the printing time longer.
This manual is constantly being improved and supplemented, we recommend downloading
the latest version from our website before building.
The development of a complex, airworthy RC flight model to express on any stan-
dard 3D printer is a very complex and extensive process. Therefore, we appeal to
your fairness not to forward the STL data you have acquired to third parties.
Thank you for your understanding and have fun with your PLANEPRINT MODEL!
Important for the
1-wall-print (P3, P5)!
In order to print airfoils of the lowest possi-
ble weight with high stability, it is necessa-
ry to print with only one wall line (Nozzle 0.4
mm). Decisive here is the adhesion between
the layers! To achieve this, you must print at
a much higher temperature than normal. As
a guideline, 230° C is a good starting point.
The parts-cooling fan should be set to 0% or
a maximum of 20%. Since not every printer
works the same, it may be necessary to make
small adjustments to these settings.
For slicing all Planeprint
models, these profiles have
to be created in Cura:
PROFILE P1_Fullbody
PROFILE P2_Hollowbody
PROFILE P3_Surface (Not necessary for this plane)
PROFILE P4_Flex
PROFILE P5_Gyroid
You can find the description at
www.planeprint.com/print
PROFILE P5_Gyroid
It is essential for the necessary stability of the LW parts
printed with PROFILE_5 are as stable as possible. Please
use a test part to check the strength by fracture tests. It must
not break along the layer lines under any circumstances! Also
note that the printing temperature for LW-PLA is as low as
possible to obtain a wall thickness of 0.4 to 0.6 mm at a flow
of 60 to 70 % (depending on brand).
Caution: at too high temperatures, LW-PLA becomes brittle
and breaks more easily.
P1_Parts 1_sy.stl
MATERIAL PLA, Weight: ~ 11 g
ADDITIONAL SETTINGS
None required
PROFILE P1_Fullbody PLA or Tough PLA
The following parts must be sliced with the PROFILE P1_Fullbody.
Please note the additional settings for the individual parts!
P1_EDF mount_sy.stl
MATERIAL PLA, Weight: ~ 5 g
ADDITIONAL SETTINGS
None required
This part is only necessary
for EDF version!
SLINGSBY T31 CADET
6
PRINTING & ASSEMBLING MANUAL
© PLANEPRINT
P1_RC mount_sy.stl
MATERIAL PLA, Weight: ~ 7 g
ADDITIONAL SETTINGS
None required
This part is only necessary
for EDF version!
PROFILE P1_Fullbody PLA or Tough PLA
The following parts must be sliced with the PROFILE P1_Fullbody.
Please note the additional settings for the individual parts!
P1_Parts 2_sy.stl
MATERIAL PLA, Weight: ~ 12 g
ADDITIONAL SETTINGS
None required
SLINGSBY T31 CADET
7
PRINTING & ASSEMBLING MANUAL
© PLANEPRINT
P1_Skid_sy.stl
MATERIAL PLA, Weight: ~ 10 g
ADDITIONAL SETTINGS
• Wall Line Count: 6
PROFILE P1_Fullbody PLA or Tough PLA
The following parts must be sliced with the PROFILE P1_Fullbody.
Please note the additional settings for the individual parts!
P1_Rim_sy.stl
MATERIAL PLA, Weight: ~ 2 g
ADDITIONAL SETTINGS
None required
SLINGSBY T31 CADET
8
PRINTING & ASSEMBLING MANUAL
© PLANEPRINT
P1_Trolley Rims_sy.stl
MATERIAL PLA, Weight: ~ 14 g
ADDITIONAL SETTINGS
None required
PROFILE P1_Fullbody PLA or Tough PLA
The following parts must be sliced with the PROFILE P1_Fullbody.
Please note the additional settings for the individual parts!
P1_Tower_sy.stl
MATERIAL PLA, Weight: ~ 10 g
ADDITIONAL SETTINGS
• Wall Line Count: 6
SLINGSBY T31 CADET
9
PRINTING & ASSEMBLING MANUAL
© PLANEPRINT
PROFILE P1_Fullbody PLA or Tough PLA
The following parts must be sliced with the PROFILE P1_Fullbody.
Please note the additional settings for the individual parts!
P1_Wingservo mount_sy.stl
MATERIAL PLA, Weight: ~ 12 g
ADDITIONAL SETTINGS
None required
SLINGSBY T31 CADET
10
PRINTING & ASSEMBLING MANUAL
© PLANEPRINT
PROFILE P2_HOLLOWBODY PLA or Tough PLA
The following parts must be sliced with the PROFILE P2_HOLLOWBODY.
Please note the additional settings for the individual parts!
P2_Cockpits_sy.stl
MATERIAL PLA, Weight: ~ 8 g
ADDITIONAL SETTINGS
None required
P2_Nose_sy.stl
MATERIAL PLA, Weight: ~ 17 g
ADDITIONAL SETTINGS
• Wall Line Count: 3
Table of contents
Other PLANEPRINT Toy manuals
PLANEPRINT
PLANEPRINT paper plane User manual
PLANEPRINT
PLANEPRINT Abrams P-1 Explorer User manual
PLANEPRINT
PLANEPRINT ZIGGY Programming manual
PLANEPRINT
PLANEPRINT FEARLESS Programming manual
PLANEPRINT
PLANEPRINT OV10 Bronco Programming manual
PLANEPRINT
PLANEPRINT Foka 4 Instructions for use
PLANEPRINT
PLANEPRINT SEAGULL GLIDER VERSION User manual
PLANEPRINT
PLANEPRINT AERON Programming manual
PLANEPRINT
PLANEPRINT Funbus User manual
PLANEPRINT
PLANEPRINT Swift S1 Programming manual
PLANEPRINT
PLANEPRINT Aermacchi MB-339 User manual
PLANEPRINT
PLANEPRINT ZLIN SAVAGE BOBBER User manual
PLANEPRINT
PLANEPRINT FOUGA MAGISTER Programming manual
PLANEPRINT
PLANEPRINT EAGLE User manual
PLANEPRINT
PLANEPRINT JETWING User manual
PLANEPRINT
PLANEPRINT V-TURN User manual
PLANEPRINT
PLANEPRINT RISE User manual
PLANEPRINT
PLANEPRINT WANNA PLAY II Programming manual
PLANEPRINT
PLANEPRINT SHARD Programming manual
PLANEPRINT
PLANEPRINT BIG BOBBER User manual
