Pixsys ATR444 User manual

ATR444

User manual / Manuale d’uso / Manuel utilisateur

Controller / Regolatore / régulateur

Table of contents

1 Safety guidelines ................................................................................................................6

1.1 Organization of safety notices ...................................................................7

1.2 Safety Precautions .........................................................................................7

1.3 Precautions for safe use................................................................................8

1.4 Environmental policy / WEEE......................................................................9

2 Model Identiﬁcation ....................................................................................................... 10

3 Technical Data ................................................................................................................. 10

3.1 General Features ......................................................................................... 10

3.2 Hardware Features ......................................................................................11

3.3 Software Features........................................................................................12

3.4 Programming mode....................................................................................12

4 Dimensions and Installation.........................................................................................13

5 Electrical wirings...............................................................................................................14

5.1 Wiring diagram.............................................................................................15

5.1.a Power Supply ..................................................................................15

5.1.b Analogue Input AI1........................................................................15

5.1.c Analogue Input AI2 (only ATR444-2xABC-x).......................... 16

5.1.d CT1 input..........................................................................................17

5.1.e CT2 input (only ATR444-22ABC)................................................ 18

5.1.f Digital inputs ................................................................................. 18

5.1.g Serial input (only ATR444-xxxxx-T).......................................... 18

5.1.h Digital outputs................................................................................19

5.1.i AO1 Analogue output...................................................................19

5.1.j AO2 Analogue output (only ATR444-24ABC-T) ......................19

5.1.k Relays output Q1 and Q2 ............................................................ 20

5.1.l Relays output Q3, Q4 and Q5 (where required).................... 20

Indice degli argomenti

1 Norme di sicurezza.......................................................................................................... 23

1.1 Organizzazione delle note di sicurezza ................................................ 23

1.2 Note di sicurezza ......................................................................................... 24

1.3 Precauzioni per l’uso sicuro...................................................................... 24

1.4 Tutela ambientale e smaltimento dei riﬁuti / Direttiva WEEE ......... 26

2 Identiﬁcazione di modello ............................................................................................ 26

3 Dati tecnici ........................................................................................................................ 27

3.1 Caratteristiche generali............................................................................. 27

3.2 Caratteristiche Hardware ......................................................................... 27

3.3 Caratteristiche software............................................................................ 28

3.4 Modalità di programmazione................................................................. 28

4 Dimensioni e installazione ........................................................................................... 29

5 Collegamenti elettrici..................................................................................................... 30

5.1 Schema di collegamento ...........................................................................31

5.1.a Alimentazione ................................................................................31

5.1.b Ingresso analogico AI1 .................................................................31

5.1.c Ingresso analogico AI2 (solo ATR444-2xABC-x) .................... 32

5.1.d Ingresso CT1 ................................................................................... 33

5.1.e Ingresso CT2 (solo ATR444-22ABC) .......................................... 34

5.1.f Ingressi digitali .............................................................................. 34

5.1.g Ingresso seriale (solo ATR444-xxxxx-T)................................... 34

5.1.h Uscite digitali.................................................................................. 35

5.1.i Uscita analogica AO1 .................................................................. 35

5.1.j Uscita analogica AO2 (solo ATR444-24ABC-T) ...................... 36

5.1.k Uscite relè Q1 e Q2.........................................................................36

5.1.l Uscite relè Q3, Q4 e Q5 (dove previsti) ..................................... 37

Index des sujets

1 Consignes de sécurité..................................................................................................... 39

1.1 Organisation des avis de sécurité ........................................................... 39

1.2 Avis de sécurité............................................................................................. 40

1.3 Précautions pour l’usage en toute sécurité .......................................... 40

1.4 Politique environnementale / DEEE ....................................................... 42

2 Identiﬁcation du modèle ............................................................................................... 43

3 Données techniques....................................................................................................... 43

3.1 Caractéristiques générales ....................................................................... 43

3.2 Caractéristiques Hardware....................................................................... 44

3.3 Caractéristiques Software ........................................................................ 45

3.4 Mode de programmation......................................................................... 45

4 Dimensions et Installation............................................................................................ 46

4.1 Raccordements électriques ...................................................................... 46

4.2 Plan des connexions................................................................................... 47

4.2.a Alimentation.................................................................................. 48

4.2.b Entrée analogique AI1 ................................................................. 48

4.2.c Entrée analogique AI2 (seulement ATR444-2xABC-x)......... 49

4.2.d Entrée CT1....................................................................................... 50

4.2.e Entrée CT2 (seulement ATR444-22ABC).................................. 50

4.2.f Entrées digitales............................................................................ 50

4.2.g Entrée sérielle (seulement ATR444-xxxxx-T).......................... 50

4.2.h Sorties digitales............................................................................. 51

4.2.i Sortie analogique AO1 ................................................................ 51

4.2.j Sortie analogique AO2 (seulement ATR444-24ABC-T)........ 52

4.2.k Sortie relais Q1 et Q2.................................................................... 52

4.2.l Sortie relais Q3, Q4 et Q5 (où prévu)........................................ 53

6 - ATR444 - User manual

Complete user manual is available for download on

www.pixsys.net

Per further information, please contact:

support@pixsys.net

1 Safety guidelines

Read carefully the safety guidelines and programming instructions contained in

this manual before connecting/using the device.

Disconnect power supply before proceeding to hardware settings or electrical

wirings to avoid risk of electric shock, ﬁre, malfunction.

Do not install/operate the device in environments with ﬂammable/explosive

gases.

This device has been designed and conceived for industrial environments and

applications that rely on proper safety conditions in accordance with national

and international regulations on labour and personal safety. Any application

that might lead to serious physical damage/ life risk or involve medical life

support devices should be avoided.

Device is not conceived for applications related to nuclear power plants,

weapon systems, ﬂight control, mass transportation systems.

Only qualiﬁed personnel should be allowed to use device and/or service it and

only in accordance to technical data listed in this manual.

Do not dismantle/modify/repair any internal component.

Device must be installed and can operate only within the allowed environmental

conditions. Overheating may lead to risk of ﬁre and can shorten the lifecycle of

electronic components.

Table of contents

User manual - ATR444 - 7

1.1 Organization of safety notices

Safety notices in this manual are organized as follows:

Safety notice Description

Danger! Disregarding these safety guidelines and notices can be

life-threatening.

Warning! Disregarding these safety guidelines and notices can result

in severe injury or substantial damage to property.

Information! This information is important for preventing errors.

1.2 Safety Precautions

This product is UL listed as open type process control equipment. Danger!

If the output relays are used past their life expectancy, contact

fusing or burning may occasionally occur. Always consider the

application conditions and use the output relays within their rated

load and electrical life expectancy. The life expectancy of output

relays varies considerably with the output load and switching

conditions.

Danger!

Loose screws may occasionally result in ﬁre.

For screw terminals of relays and of power supply, tighten screws

to tightening torque of 0,51 Nm. For other terminals, tightening

torque is 0,19 Nm

Warning!

A malfunction in the Digital Controller may occasionally make

control operations impossible or prevent alarm outputs,

resulting in property damage. To maintain safety in the event

of malfunction of the Digital Controller, take appropriate safety

measures, such as installing a monitoring device on a separate

line.

Warning!

8 - ATR444 - User manual

1.3 Precautions for safe use

Be sure to observe the following precautions to prevent operation failure,

malfunction, or adverse aﬀects on the performance and functions of the

product. №t doing so may occasionally result in unexpected events. Do not

handle the Digital Controller in ways that exceed the ratings.

• The product is designed for indoor use only. Do not use or store the product

outdoors or in any of the following places.

- Places directly subject to heat radiated from heating equipment.

- Places subject to splashing liquid or oil atmosphere.

- Places subject to direct sunlight.

- Places subject to dust or corrosive gas (in particular, sulﬁde gas and

ammonia gas).

- Places subject to intense temperature change.

- Places subject to icing and condensation.

- Places subject to vibration and large shocks.

• Installing two or more controllers in close proximity might lead to increased

internal temperature and this might shorten the life cycle of electronic

components. It is strongly recommended to install cooling fans or other

air-conditioning devices inside the control cabinet.

• Always check the terminal names and polarity and be sure to wire properly.

Do not wire the terminals that are not used.

• To avoid inductive noise, keep the controller wiring away from power

cables that carry high voltages or large currents. Also, do not wire power

lines together with or parallel to Digital Controller wiring. Using shielded

cables and using separate conduits or ducts is recommended. Attach a

surge suppressor or noise ﬁlter to peripheral devices that generate noise

(in particular motors, transformers, solenoids, magnetic coils or other

equipment that have an inductance component). When a noise ﬁlter is used

at the power supply, ﬁrst check the voltage or current, and attach the noise

ﬁlter as close as possible to the Digital Controller. Allow as much space as

possible between the Digital Controller and devices that generate powerful

high frequencies (high-frequency welders, high-frequency sewing

machines, etc.) or surge.

• A switch or circuit breaker must be provided close to device. The switch

or circuit breaker must be within easy reach of the operator, and must be

marked as a disconnecting means for the controller.

User manual - ATR444 - 9

• The device must be protected by a fuse 1A (cl. 9.6.2).

• Wipe oﬀ any dirt from the Digital Controller with a soft dry cloth. Never

use thinners, benzine, alcohol, or any cleaners that contain these or other

organic solvents. Deformation or discoloration may occur.

• The number of non-volatile memory write operations is limited. Therefore,

use EEprom write mode when frequently overwriting data, e.g.: through

communications.

• Chemicals/solvents, cleaning agents and other liquids must not be used.

• Non-respect of these instructions may reduce performances and safety of

the devices and cause danger for people and property.

For CT (Current Transformer) input:

• Warning: To reduce risk of electric shock, always open or disconnect circuit

from power-distribution system (or service) of building before installing or

servicing current transformers

• For use with Listed Energy-Monitoring Current Transformers

• The current transformers may not be installed in equipment where they

exceed 75 percent of the wiring space of any cross-sectional area within the

equipment

• Restrict installation of current transformer in an area where it would block

ventilation openings

• Restrict installation of current transformer in an area of breaker arc venting

• №t suitable for Class 2 wiring methods

• №t intended for connection to Class 2 equipment

• Secure current transformer and route conductors so that the conductors do

not directly contact live terminals or bus.

1.4 Environmental policy / WEEE

Do not dispose electric tools together with household waste material.

According to European Directive 2012/19/EU on waste electrical and electronic

equipment and its implementation in accordance with national law, electric

tools that have reached the end of their life must be collected separately and

returned to an environmentally compatible recycling facility.

10 - ATR444 - User manual

2 Model Identiﬁcation

Power supply 24..230 VAC/VDC ±15% 50/60 Hz – 6 Watt/VA

ATR444-13ABC 1 A.I. + 3 relays 5 A + 2 SSR + 4 D.I. + 1 A.O. V/mA + 1 CT

ATR444-14ABC-T 1 A.I. + 4 relays 5 A + 2 SSR + 2 D.I. + 1 A.O. V/mA + 1 CT +

RS485

ATR444-15ABC 1 A.I. + 5 relays 5 A + 2 SSR + 4 D.I. + 1 CT

ATR444-22ABC 2 A.I. + 2 relays 5 A + 2 SSR + 4 D.I. + 1 A.O. V/mA + 2 CT

ATR444-24ABC-T 2 A.I. + 4 relays 5 A + 2 SSR + 4 D.I. + 2 A.O. V/mA + 1 CT +

RS485

3 Technical Data

3.1 General Features

Displays 4 digits 0,63’’ + 5 digits 0,39’’ + 5 digits 0,33’’ + bar graph

Operating

temperature Temperature: 0-45° C -Humidity 35..95 uR%

Sealing

Front panel mounting NEMA type 1

IP65 front panel (with gasket) - IP20 box and terminals (UL

not evaluated)

Material Box and front panel PC UL94V2

Weight Approx. 245 g

This manual suits for next models

Table of contents

Languages:

Popular Controllers manuals by other brands

Digiplex

Digiplex DGP-848 Programming guide

YASKAWA

YASKAWA SGM series user manual

Sinope

Sinope Calypso RM3500ZB installation guide

Isimet

Isimet DLA Series Style 2 Installation, Operations, Start-up and Maintenance Instructions

LSIS

LSIS sv-ip5a user manual

Rockwell Automation

Rockwell Automation 1769-L31 installation instructions

Airflow

Airflow Uno hab Installation and operating instructions

ABB

ABB ACS580-01 drives Hardware manual

Panasonic

Panasonic GM1 Series Reference manual

Emerson

Emerson SW93 owner's manual

AutoAqua

AutoAqua Smart ATO micro SATO-120P manual

Panasonic

Panasonic FP? Positioning Unit RTEX Technical manual

Samson

Samson Type 5824 Mounting and operating instructions

Alpha IP

Alpha IP MIOB 21001 manual

Siemens

Siemens OpenAir GMA 1 Series Mounting instructions

Surecom

Surecom SR-629 user manual

Fishman

Fishman TriplePlay installation guide

Regulus

Regulus SRS1 T Installation and operation manual