Phoenix Model CESSNA AWAGON User manual

Instruction Manual

Wingspan: 2560mm

Length : 1600mm

Weight : 5500g - 6000g

Radio : 7 servo / 6 channel

Engine : 91 - 120 two stroke

MOTOR MOUNT ASSEMBLY

. (1) Engine mount

. (8) 4mm x 30 mm screw

. (8) Block washer

. (8) 8mm flat washer

. (8) Nut

THROTTLE CONTROL SYSTEM

. (1) 1.3mm x 600mm metal pushrod

. (1) 3.5mm x 350mm nylon housing

. (1) Metal connector

FUEL TANK

. (1) Nylon fuel tank

. (1) Metal clunk

. (1) Pre - assembled stopper w / 3 tube

MISCELLANEOUS ITEMS

. (1) 32mm x 455mm aluminum dihedral

. (2) 19mm x 360mm aluminum dihedral

. (1) Spinner

. (12) 2,6mm x 10mm wood screws

. (6) 4mm x 35mm wood screws

. (6) 8mm flat washer

. (4) Wing screws

. (2) 4mm x 30mm nylon screws

. (3) 1.7mm x 900mm metal pushrod

. (2) 600 trim tape (white)

. (1) 400 trim tape (red)

. (2) Gear pant

. (1) Wing tip cover

. (2) Wing strut

. (2) Plastic joiner

. (1) Cowling

. (1) Decal

MAIN GEAR ASSEMBLY

. (2) Main gear

. (2) 100mm diameter wheels

. (2) Set of alxe

. (4) 4mm x 20mm screws

. (4) Block washer

. (4) 8mm flat washer

TAIL GEAR ASSEMBLY

. (1) Tail gear

. (3) Collar

. (1) 35mm diameter wheel

ELEVATOR CONTROL SYSTEM

. (2) Control horn

. (2) 3mm x 45 mm screw

. (2) Nylon horn

. (2) Metal clevis M2

. (2) Silicon tube

. (1) Domino connector

. (1) 1.7mm x 100mm metal pushrod

. (1) Nylon snap keeper

Instruction Manual CESSNA AWAGON

1 2

3 4

5 6

7 8

Iron the covering if necessary. Glue the hinges by C.A glue.

Remove the covering.

Make the center line onto the joiner. Gluing the wing by Epoxy glue.

Apply the trim tape to the center section. Remove the covering.

1Joining the wing:

C.A glue

Instruction Manual CESSNA AWAGON

910

11 12

13 14

15 16

Tape the servo lead to the thread. Using the thread as a guide.

Pull the servo lead out. Tape the servo lead onto the wing.

Install the aileron servo. Make the same way for the flat servo.

Tape the servo lead onto the wing. Aileron and flap linkage.

Instruction Manual CESSNA AWAGON

17 18

19 20

21 22

23 24

Install the control horn for the aileron. Install the control horn for the flap.

Insert the clevis onto the metal rod. Insert the silicone tube into the clevis.

Attach the clevis into the cotnrol horn. Cut away the metal rod.

Bend “L” the aileron pushrod. Attach the nylon snap keeper to the aileron servo arm.

Instruction Manual CESSNA AWAGON

25 26

27 28

30 31

Attach the nylon snap keeper to the aileron servo arm. Install the flat linkage as the same installing the aileron linkage.

The wing tip. Remove the covering.

Glue the wing tip to the wing using the Epoxy glue.

Make the center line onto the horizontal. Remove the covering.

2Installing the horizontal and the vertical:

Center line

Instruction Manual CESSNA AWAGON

32 33

35 36

37 38

Glue the elevator hinge by C.A glue. Insert the horizontal to the fuselage and check it.

Check the horizontal.

Mark the shape of the fuselage onto the horizontal.

Remove the covering. Glue the horizontal to the fuselage by Epoxy glue.

Remove the covering from the rear of the vertical. Mark the shape of the vertical onto the fuselage.

Instruction Manual CESSNA AWAGON

39 40

41 42

44 45

Mark the shape of the vertical onto the horizontal. Remove the covering from the fuselage.

Remove the covering from the horizontal.

Glue the verticcal to the fuselage by Epoxy glue.

Glue the verticcal to the horizontal by Epoxy glue.

Check the rudder.

The tail gear. Install the wheel and the collar into the tail gear.

3Installing the tail gear and the rudder:

a1 a2

a1 = a2

Instruction Manual CESSNA AWAGON

46 47

48 49

50 51

52 53

Remove the covering. Remove the covering.

Remove the covering.

Insert the rudder into the vertical stabilizer.

Slide the tail gear into the fuselage and the rudder,

and than secure it. Glue the hinge by C.A glue.

The landing gear set. Remove the covering.

4Installing the landing gear:

Instruction Manual CESSNA AWAGON

54 55

57 58

59 60

Install the metal connector into the landing gear. Install the landing gear to the fuselage.

Secure the plastic cover for the landing gear.

Install the elevator control horn same as installing the aileron

linkage. Attach the clevis to the elevator pushrod.

Insert the silicone tube into the clevis. Remove the covering.

5Installing the elevator pushrod:

Table of contents

Other Phoenix Model Toy manuals

Phoenix Model

Phoenix Model TUCANO 60CC User manual

Phoenix Model

Phoenix Model Thunder Streak User manual

Phoenix Model

Phoenix Model Tiger Moth User manual

Phoenix Model

Phoenix Model Classic User manual

Phoenix Model

Phoenix Model Magic Aerobatic 3D User manual

Phoenix Model

Phoenix Model Pilatus-PC21 User manual

Phoenix Model

Phoenix Model Spitfire User manual

Phoenix Model

Phoenix Model Boomerang 60 User manual

Phoenix Model

Phoenix Model Diabolo User manual

Phoenix Model

Phoenix Model Tucano Electric User manual

Phoenix Model

Phoenix Model Wallaby Mk2 User manual

Phoenix Model

Phoenix Model Preceptor ARF EDF 90mm User manual

Phoenix Model

Phoenix Model Extra 330S User manual

Phoenix Model

Phoenix Model Edge 540 User manual

Phoenix Model

Phoenix Model Dolphin 40 User manual

Phoenix Model

Phoenix Model Tiger 3 User manual

Phoenix Model

Phoenix Model BULLDOG User manual

Phoenix Model

Phoenix Model super constellation User manual

Phoenix Model

Phoenix Model PC21 PILATUS MK2 User manual

Phoenix Model

Phoenix Model Extra 300 S User manual

Phoenix Model

Phoenix Model EXTRA 330SC User manual

Phoenix Model

Phoenix Model SONIC User manual

Phoenix Model

Phoenix Model KATANA-61 User manual

Phoenix Model

Phoenix Model MXS User manual

Popular Toy manuals by other brands

marklin

marklin 37321 instruction manual

Canon

Canon PAPER CRAFT Assembly instructions

GREAT PLANES

GREAT PLANES Pitts M-12S instruction manual

NOCH

NOCH 14261 manual

Hausler

Hausler 450 SE V2 quick start

Dynaflite

Dynaflite Daydream instruction manual

MiniacRC

MiniacRC MIGHTY MINI P40 WARHAWK Build instructions

Kenner

Kenner Batman 63651 instructions

LEGO

LEGO 8527 instructions

iKarus

iKarus ECO 8 Assembly instruction

Multiplex

Multiplex EasyStar II Building instructions

Walkera

Walkera 38 User handbook

Hasbro

Hasbro TRANSFORMERS BUMBLEBEE manual

MD MXION SWD user manual

Mattel

Mattel Disney Pixar Cars Cozy Cone Spiral Rampway instructions

marklin

marklin 39671 user manual

Meccano

Meccano 15103 instructions

LEGO

LEGO TECHNIC 8735 instructions