Philips PS402 User manual
Register your product and get support at
www.philips.com/support
User manual
PS402
Smart Speaker
Contents
1 Important 1
Safety 1
Notice 1
2 Your Wireless speaker 3
Introduction 3
What's in the box 3
Overview of the speaker 4
3 Get started 5
5Connect power
6Google home APP
4 You can also use a
BLUETOOTH speaker
7
Connect a Bluetooth device 7
Play from a connected
Bluetooth device
8
Disconnect a device 8
Reconnect a device 8
5 Other features 10
Adjust volume 10
6 10
7 Troubleshooting 11
General 11
Set clock 8
Set alarm time 8
Wireless charging 9
Standby mode 9
EN
1 Important
Safety
Warning
•Never remove the casing of this speaker.
Never place this speaker on other electrical
equipment.
Keep this speaker away from direct
•
•
•Only use attachments or
manufacturer.
Do not place any sources of
danger on the speaker (e.g. lighted
candles).
If your speaker gets wet, clean with
a soft dry cloth and then let it dry
completely in a well-ventilated
place before use next time.
•
•
Note
•The type plate is located on the left side
of the speaker.
Notice
Compliance
Hereby, MMD Hong Kong Holding
Limited declares that this product is in
compliance with the essential
requirements and other relevant
provisions of Directive 2014/30/EU.
Conformity on
www.philips.com/support.
Care of the environment
Disposal of your old product
Your product is designed and
manufactured with high quality
materials and components, which can
be recycled and reused.
our pr
This symbol on a product means that the
product is covered by European Directive
2012/19/EU.
1
to this device that are not expressly
approved by MMD Hong Kong Holding
Limited may void the user’s authority to
operate the equipment.
2013/56/EU which cannot be disposed
of with normal household waste. We
strongly advise you to take your product
service centre to have a professional
remove the rechargeable battery.
Inform yourself about the local separate
collection system for electrical and
electronic products and rechargeable
batteries. Follow local rules and
never dispose of the product and
rechargeable batteries with normal
household waste. Correct disposal of
old products and rechargeable batteries
helps prevent negative consequences
for the environment and human health.
Caution
Environmental information
All unnecessary packaging has been
omitted. We have tried to make the
packaging easy to separate into three
materials: cardboard (box), polystyrene
regarding the disposal of packaging
protective foam sheet.)
Your system consists of materials
which can be recycled and reused if
disassembled by a specialized company.
Please observe the local regulations
materials, exhausted batteries and old
equipment.
EN
2
2 Your
wireless
speaker
Congratulations on your purchase, and
your product at www.philips.com/
welcome.
Introduction
With this speaker, you can enjoy audio
from Bluetooth-enabled devices or
play network audio resources.
What's in the box
Check and identify the contents of your
package:
•Speaker
•Adapter
•Printed materials
EN 3
USB DC IN
Wireless charging/
Wireless charging
Push to talk/
Push to talk(Short press)
standby
(Long press 3s)
Vol+/
USB charging port
Power adapter jack
Mute/
Play/Pause/
Play/Pause/Exit standy mode/
stop timer/alarm(Short press)
Open the bluetooth after successful
authentication (Long press 3s)
Enter standy mode (Long press 10s)
Mode/
Vol-/
Clock light brightness adjust
(Short press)
Bottom light brightness adjust
(Double press)
Switch time display format
(Long press 3s)
1 step down (Short press)
continous steps down
(Long press 3s or 3s+)
continous steps up
Clock / Display panel
Overview of the speaker
[ ]+[ ]Factory data reset.
11
4EN
1 step down (Short press)
(Long press 3s or 3s+)
DC IN 15V 2.5A
Max output 5V 1A current
Charge your mobile devices
Show current time
Automatically setup and
display after networking
(Long press 12s )
10
5
EN
3 Get started
Always follow the instructions in this
chapter in sequence.
Connect power
Caution
Risk of product damage! Make sure that the
power voltage corresponds to the voltage
printed on the back or underside of the clock
radio.
Risk of electric shock! When you unplug the
AC plug, always pull the plug from the socket.
Never pull the cord.
Connect the power adaptor to the wall
outlet.
6EN
https://www.google.com/cast/setup/
Google Home
“Google Home”APP “Google Home”APP
1
2
How to use
Talk to your Google Assistant.
You can start conversation simply
by saying “Ok Google” or short
press .
Sure, here's some
music on
Google Play Music
Ok Google,
Play some music
Place the unit as close as possible
to a wireless LAN router.
Establish a wireless connection
from your smartphone/iPhone to
the wireless LAN router.
Take a note of the SSID and the
password(encryption key) of the
connected wireless LAN router.
some of the wireless LAN routers
have multiple SSIDs.for details,
refer to the operating instructions
supplied with the wireless LAN
router.
On the iPhone,activate the
BLUETOOTH funtion.
“Google Home” uses the
BLUETOOTH funtion to identify
the unit.
Set up Wi-Fi®with app.
Turn on the unit.
Tap to start “Google Home.”
Follow the directions in the app
to set up your unit for Wi-Fi. Set
the unit to the smartphone/
iPhone’s same Wi-Fi connection.
7
EN
4 You can also use as a
BLUETOOTH speaker
With this speaker, you can listen to
audio from Bluetooth-enabled devices
and play music through Bluetooth.
Connect a Bluetooth
device
Note
•
•
•
•
•
•
•
•
can open BTpairing by voice,“Ok,
google open the bluetooth”/
“Ok，google bluetooth pairing”.
speaker will be waiting status,for
pairing other Bluetooth device.
Form your smartphone or other
device’ s BLUETOOTH seting,
unit you setup for Wi-Fi.
If pairing procedure has succeed,
waiting status for pairing will be
released.Speaker will change into
BT connection status.
For BT pairing operation, if can
minutes, speaker will go out.But it
may be changed by Google control.
When Bluetooth is connected or
disconnected, there will be a tone
output.
Make sure that Bluetooth function is
enabled on your device, and your device is
set as visible to all other Bluetooth devices.
Any obstacle between this speaker
and a Bluetooth device can reduce the
operational range.
Keep away from any other electronic
device that may cause interference.
The operational range between this
speaker and a Bluetooth device is
approximately 3 meters.
8EN
Play from a connected
Bluetooth device
After successful Bluetooth connection,
play audio on the connected device.
» Audio streams from your Bluetooth
device to the speaker.
•To pause or resume play, press .
Tip
•You can also use your Bluetooth device to
control play.
Disconnect a device
•Disable Bluetooth on your device;
Move the device beyond the
communication range.
•
Reconnect a device
•When you turn on the speaker,
If not successful, select your
Bluetooth device name on your
Bluetooth menuto start reconnection.
•
Set clock
Long press 3 seconds to
set 12/24 hour format.
Automatically setup and display after
networking.
1Clock
AM/PM
2
•
Set alarm timer
You can setup alarm/timer by Google
Assistant.
Input Key: Short press
Press key during Alarm ringing,
then Stop Alarm.
•
Table of contents
Other Philips Speakers manuals
Philips
Philips SW700M User manual
Philips
Philips MMS8085B User manual
Philips
Philips HTL2160 User manual
Philips
Philips SBT30/93 User manual
Philips
Philips SBCBS020/00 User manual
Philips
Philips AW9000 User manual
Philips
Philips SBT300/05 User manual
Philips
Philips SPA9300 User manual
Philips
Philips SBC BC 8310 User manual
Philips
Philips SPA6270BT User manual
Philips
Philips HTL1032 User manual
Philips
Philips SPA5210 User manual
Philips
Philips HTL1100 User manual
Philips
Philips HTL2193B User manual
Philips
Philips SW700M/05 User manual
Philips
Philips HTL5140B User manual
Philips
Philips MMS171/17 User manual
Philips
Philips HTS8141 User manual
Philips
Philips CSP620 User manual
Philips
Philips TAS1505 User manual
