Philips Dynalite DMC2 User manual

DMC2

Installation Guide

Revision 03

Area for main photograph

Area for insert photo

W: 46.1mm up to 79 mm

H: 46.1mm

X: 12.6mm absolute on page

Y: 132.6mm abs on page

This insert has a shadow

Contents

DMC2 1

1Product Overview 5

1.1 DMC2 Enclosure 6

1.1.1 Dimensions 6

1.1.2 Enclosure diagram 7

1.2 DSM2-XX 8

1.2.1 Dimensions / Diagrams 8

1.3 DMD31X Module 9

1.3.1 Dimensions 9

1.3.2 DMD31X module output wiring 10

1.4 DMP310-GL 11

1.4.1 Dimensions / Diagrams 11

1.5 DMR310 / DMR316 12

1.5.1 Dimensions / Diagrams 12

2Installation 13

2.1 Installation requirements 13

2.2 Cabling 15

2.3 Mounting the DMC2 16

2.4 Inserting and connecting modules 17

2.4.1 DCM-DyNet 19

2.4.2 DSM2-XX 20

2.4.3 Control module installation 22

2.4.4 Wiring loom 24

3Post-installation testing 25

3.1 Service LEDs and switch 25

3.2 Manual override keypad 26

DMC2 4

About this Guide

Overview

This guide is designed to assist in the installation of the DMC2 Modular Controller.

A working knowledge of Dynalite commissioning processes is required to effectively use this

document. For more information on the commissioning process, consult the DMC2

Commissioning Guide.

Disclaimer

These instructions have been prepared by Philips Dynalite and provide information on Philips

Dynalite products for use by registered owners. Some information may become superseded

through changes to the law and as a result of evolving technology and industry practices.

Any reference to non- Philips Dynalite products or web links does not constitute an

endorsement of those products or services.

notice. No representation or warranty as to the accuracy or completeness of the

information included herein is given and any liability for any action in reliance thereon is

disclaimed. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke

Philips N.V. All other trademarks are owned by Signify Holding or their respective owners.

DMC2 5 Product Overview

1Product Overview

The Philips Dynalite DMC2 is a versatile modular controller that consists of a power supply

module, communication module, and up to two interchangeable control modules.

The power and communication modules are listed below:

•DSM2-XX – Single-phase or three-phase supply module that supplies power to the

communications and control modules.

•DCM-DyNet – Communications module that supports DyNet, DMX Rx, dry

contact inputs and UL924 input.

A variety of control modules provide simultaneous control of multiple load types and

capacities:

•DMD – Driver control module for 1-10V, DSI and DALI drivers.

•DMP – Phase control dimmer module for Leading or Trailing Edge output, suitable

for use with most types of dimmable electronic drivers.

•DMR – Relay control module for most types of switched loads.

The DMC2 can be surface or recess-mounted, and features a number of cabling knockouts

to accommodate a variety of communication, supply and load configurations.

January 15, 2019

DMC2 6 Product Overview

1.1 DMC2 Enclosure

The DMC2 enclosure is a galvanized steel case with powder coated front covers. It includes

mounting bays for power supply module, communication module and two output modules.

1.1.1 Dimensions

January 15, 2019

DMC2 7 Product Overview

1.1.2 Enclosure diagram

January 15, 2019

DMC2 8 Product Overview

1.2 DSM2-XX

The DSM2-XX fits into the top module bay of the enclosure, and supplies power to the

communication and control modules.

1.2.1 Dimensions / Diagrams

January 15, 2019

DMC2 9 Product Overview

1.3 DMD31X Module

The DMD31X module is a three-channel signal controller. Each channel is individually

configurable to DALI Broadcast, 1-10V or DSI.

1.3.1 Dimensions

January 15, 2019

DMC2 10 Product Overview

1.3.2 DMD31X module output wiring

The control signal must be terminated into the top six terminals on the module. The power

circuit must be terminated into the bottom six terminals as indicated in the diagram below.

Ensure that each signal and power channel has been paired and segregated correctly.

For installation involving 120 VAC circuits only:

Wire all output circuits using conductors suitable for Class 1 / Light and Power circuits rated

150 V minimum. The signal control circuit conductors can be intermingled with the branch

circuit wiring in the wire trough. The signal control circuit conductors can be considered as

Class 2 conductors. Class 2 wiring methods can be used for the signal control circuit outside

the DMC control panel.

For installation involving 240 or 277 VAC circuits:

Wire all output circuits using conductors suitable for Class 1 / Light and Power circuits rated

300V min. The signal control circuit conductors can be intermingled with the branch circuit

wiring in the wire trough. The signal control circuit conductors are to be considered as

Class 1 conductors. Class 1 / Light and Power wiring methods must be used for the signal

control circuit outside the DMC control panel.

This manual suits for next models

Table of contents

Other Philips Controllers manuals

Philips

Philips CoralCare Mounting instructions

Philips

Philips Dynalite DMC2 User manual

Philips

Philips Dynalite DLE1220GL User manual

Philips

Philips dynalite DMRC210-RJ-DA User manual

Philips

Philips Dynalite DDLE802 User manual

Philips

Philips iPlayer 3 User manual

Philips

Philips DYNALITE DDRC420FR User manual

Philips

Philips MSX VU 0005 User manual

Philips

Philips Dynalite DMRC210 User manual

Philips

Philips 9890 000 0268 Series User manual

Philips

Philips dynalite LFC8400 User manual

Philips

Philips Dynalite Revolution Series User manual

Philips

Philips SC1500 User manual

Philips

Philips LFH 2305 User manual

Philips

Philips ColourChaser Touch User manual

Philips

Philips ColorDial Pro User manual

Philips

Philips Vaya Touch Controller User manual

Philips

Philips dynalite DDC116 User manual

Philips

Philips DYNALITE DDRC1220FR-GL User manual

Philips

Philips DYNALITE DMC4 Service manual

Philips

Philips PTN3501 User manual

Philips

Philips Strand Lighting Sixer Instruction Manual

Philips

Philips Light System Manager User manual

Philips

Philips Dynalite DLE1210GL User manual

Popular Controllers manuals by other brands

Digiplex

Digiplex DGP-848 Programming guide

YASKAWA

YASKAWA SGM series user manual

Sinope

Sinope Calypso RM3500ZB installation guide

Isimet

Isimet DLA Series Style 2 Installation, Operations, Start-up and Maintenance Instructions

LSIS

LSIS sv-ip5a user manual

Rockwell Automation

Rockwell Automation 1769-L31 installation instructions

Airflow

Airflow Uno hab Installation and operating instructions

ABB

ABB ACS580-01 drives Hardware manual

Panasonic

Panasonic GM1 Series Reference manual

Emerson

Emerson SW93 owner's manual

AutoAqua

AutoAqua Smart ATO micro SATO-120P manual

Panasonic

Panasonic FP? Positioning Unit RTEX Technical manual

Samson

Samson Type 5824 Mounting and operating instructions

Alpha IP

Alpha IP MIOB 21001 manual

Siemens

Siemens OpenAir GMA 1 Series Mounting instructions

Surecom

Surecom SR-629 user manual

Fishman

Fishman TriplePlay installation guide

Regulus

Regulus SRS1 T Installation and operation manual