PerkinElmer Lambda 365 User manual

09931258D

PerkinElmer, 710 Bridgeport Avenue,

Shelton, CT 06484-4794, U.S.A

Produced in the USA.

Lambda 365 Test Tube Holder

Installation Instructions

This instruction sheet describes the installation of this accessory which is used with the Lambda 365

Spectrophotometer.

NOTE:

Read these instructions before you install this accessory.

Contacting PerkinElmer

Supplies, replacement parts, and accessories can be ordered directly from PerkinElmer, using the part

numbers.

See our website:

http://perkinelmer.com

PerkinElmer's catalog service offers a full selection of high-quality supplies.

To place an order for supplies and many replacement parts, request a free catalog, or ask for information:

If you are located within the U.S., call toll free 1-800-762-4000, 8 a.m. to 8 p.m. EST. Your order will be

shipped promptly, usually within 24 hours.

If you are located outside of the U.S., call your local PerkinElmer sales or service office.

Features

• Available with various tube cells

• Excellent durability

Figure 1 Lambda 365 Test Tube Holder [P/N: N4101018]

09931258D

2

Dimensions and Specifications

Type Specification

Dimension (mm) 120 (W) x 87 (H) x 170 (D)

Weight (kg) 0.9

Sample Size (mm) Max. Height : 130

Min~Max. Diameter: 10~20

Configuration of the Test Tube Holder

Figure 2 Lambda 365 Test Tube Holder Configuration

Figure 3 Height adjustment plate (2 ea) and Phillips round head screw with washer

(M3x8L, 4 ea)

Figure 4 Knob

09931258D

3

Installation

1. Loosen the knob to take apart the existing cell holder.

Figure 5 Loosening the knob

2. Pull out the cell holder by hand.

Figure 6 Pulling out the cell holder

3. Insert the test tube holder in the sample compartment and tighten the knob.

Figure 7 Inserting the test tube holder

09931258D

4

4. Turn on the power switch which is located on the rear of the instrument.

5. Insert the tube in the test tube holder.

Figure 8 Inserting the test tube holder

09931258D

5

Sampling

When the tube height is less than 105 mm

1. Insert the tube in the test tube holder.

Figure 9 Inserting the test tube

When the tube height is more than 105 mm

NOTE:

Available tube height up to 130 mm.

1. To control the height adjustment plate, loosen the four screws by using a Phillips screwdriver.

Figure 10 Controlling the height adjustment plate

2. Insert the tube and set the appropriate location of the height adjustment plate so that the

inserted tube does not block the sample compartment lid from closing.

NOTE:

If the tube height is more than 120 mm, it is recommended to remove the height adjustment plate.

3. After setting the height, tighten the Phillips round head screws with washer.

09931258D

6

Other manuals for Lambda 365

6

Table of contents

Other PerkinElmer Laboratory Equipment manuals

PerkinElmer

PerkinElmer Caliper IVIS Spectrum User manual

PerkinElmer

PerkinElmer OMNI International Bead Ruptor 96 User manual

PerkinElmer

PerkinElmer AVIO 200 Installation instructions

PerkinElmer

PerkinElmer RamanMicro 200 Series User manual

PerkinElmer

PerkinElmer FT-IR User manual

PerkinElmer

PerkinElmer IVIS Lumina XRMS III Series User manual

PerkinElmer

PerkinElmer Lambda 465 User manual

PerkinElmer

PerkinElmer OMNI Prep User manual

PerkinElmer

PerkinElmer RamanStation 400 Series User manual

PerkinElmer

PerkinElmer QuickSTAR Horizon User manual

PerkinElmer

PerkinElmer Frontier Optica FT-IR User manual

PerkinElmer

PerkinElmer aanalyst 200 User manual

PerkinElmer

PerkinElmer Panthera-Puncher 9 User manual

PerkinElmer

PerkinElmer CLARUS 600 GC User manual

PerkinElmer

PerkinElmer OilExpress System User manual

PerkinElmer

PerkinElmer Lambda 365 User manual

PerkinElmer

PerkinElmer Clarus SQ 8 MS Series Installation instructions

PerkinElmer

PerkinElmer Panthera-Puncher 9 User manual

PerkinElmer

PerkinElmer LED Solutions ACULED Designer Kit Silver User manual

PerkinElmer

PerkinElmer clarus 500 gc User manual

PerkinElmer

PerkinElmer Wallac 1420 User manual

PerkinElmer

PerkinElmer Raman IdentiCheck User manual

PerkinElmer

PerkinElmer OilExpress 4 User manual

PerkinElmer

PerkinElmer Lambda 365 Peltier Temp Ctrl Unit Multi User manual

Popular Laboratory Equipment manuals by other brands

Qiagen

Qiagen DML 3000 user manual

Queensgate

Queensgate NANOSCAN OP400 Quick start instructions

Conviron

Conviron GEN1000-GE Operator's manual

Parr Instrument

Parr Instrument 4560 Operating instructions manual

IKA

IKA IC control operating instructions

Integra

Integra DOSE IT operating instructions

Agilent Technologies

Agilent Technologies 5800 ICP-OES user guide

Endress+Hauser

Endress+Hauser Cleanfit CPA875 operating instructions

NI

NI PXI-5422 CALIBRATION PROCEDURE

Collomix

Collomix Aqix operating instructions

SPEX SamplePrep

SPEX SamplePrep 6875 Freezer/Mill Series operating manual

Ocean Insight

Ocean Insight FLAME-NIR+ Installation and operation manual

Parker

Parker ALIGN-MG-NA Installation, operation and maintenance manual

BD

BD 644787 user guide

DENTAURUM

DENTAURUM Compact Megaplus Instructions for use

Biuged Laboratory Instruments

Biuged Laboratory Instruments BGD 626 instruction manual

VWR

VWR SAS Super IAQ instruction manual

illumina

illumina MiSeqDx reference guide