PerkinElmer Lambda 365 User manual

09931256D

PerkinElmer, 710 Bridgeport Avenue,

Shelton, CT 06484-4794, U.S.A

Produced in the USA.

Lambda 365 Microcell Holder

Installation Instructions

This instruction sheet describes the installation of this accessory which is used with the Lambda 365

Spectrophotometer.

NOTE:

Read these instructions before you install this accessory.

Contacting PerkinElmer

Supplies, replacement parts, and accessories can be ordered directly from PerkinElmer, using the part

numbers.

See our website:

http://perkinelmer.com

PerkinElmer's catalog service offers a full selection of high-quality supplies.

To place an order for supplies and many replacement parts, request a free catalog, or ask for information:

If you are located within the U.S., call toll free 1-800-762-4000, 8 a.m. to 8 p.m. EST. Your order will be

shipped promptly, usually within 24 hours.

If you are located outside of the U.S., call your local PerkinElmer sales or service office.

Features

•Suitable size for micro cells

•Excellent durability

•Adjustable cell holder position

Figure 1 Lambda 365 Micro Cell Holder [P/N: N4101028]

09931256D

Dimensions and Specifications

Type Specification

Outline

Height (mm) 86.5

Width (mm) 120

Depth (mm) 170

Weight (kg) 0.56

Description

Connectable Cells

Other Cells are available upon request if what you want is not listed.

Configuration of Micro Cell Holder

Figure 2 Lambda 365 Micro Cell Holder Configuration

Figure 3 Knob

Description

Micro cell, 10 mm light path, Quartz, 1400 ㎕, ea

Micro cell, 10 mm light path, Quartz, 700 ㎕, ea

Micro cell, 10 mm light path, Quartz, 50㎕, ea

Right-to-left

adjustment knob

Top-to-bottom

adjustment knob

09931256D

Installation

1. Loosen a knob to take apart the existing cell holder.

Figure 4 Loosening a knob

2. Pull out the existing cell holder by hand.

Figure 5 Pulling out the cell holder

3. Insert the micro cell holder in the sample compartment and tighten the knob.

Figure 6 Inserting the Micro Cell Holder

09931256D

4. Insert the micro cells into the cell holder.

Figure 7 Inserting the micro cells into the cell holder

How to adjust the Microcell holder so that the beam passes

through the micro cell window

1. Run Scan mode and select Method. Select SBW 20.

2. Select Measure in main menu and select Go to Wavelength and then check Zero Order.

3. Input the micro cells into each reference and sample holder.

Reference

Sample

09931256D

4. Attach the white paper (ex. post-it note) on the right side wall of the sample compartment for

checking the light passes through the window of the micro cell. In order to adjust the right-and -

left position of the micro cell holder, loosen the two hand bolts on the plate of the microcell

holder.

5. Adjust the position by moving the micro cell holder back and forth slowly so that the large

portion of light passes through the window of the micro cell. After the position adjustment is

completed, tighten the hand bolt on the bottom plate of the microcell holder.

09931256D

6. In order to adjust the height of the micro cell holder, loosen the knob on the side of the

microcell holder.

7. Adjust the height by moving the micro cell holder up and down slowly so that the large portion

of light passes through the window of the micro cell. After the height adjustment is completed,

tighten the knob on the side of the micro cell holder.

NOTE:

It is required to adjust the left-and-right and height positions of both the sample and reference

cell holder.

Other manuals for Lambda 365

Table of contents

Other PerkinElmer Laboratory Equipment manuals

PerkinElmer

PerkinElmer Clarus 600/560 D MS Installation instructions

PerkinElmer

PerkinElmer S20 Series User manual

PerkinElmer

PerkinElmer FL 6500 User manual

PerkinElmer

PerkinElmer Spectrum Two HATR User manual

PerkinElmer

PerkinElmer Clarus SQ 8 MS Series Installation instructions

PerkinElmer

PerkinElmer PINAACLE 900 Series User manual

PerkinElmer

PerkinElmer chemagic 360-D User manual

PerkinElmer

PerkinElmer Lambda 365 User manual

PerkinElmer

PerkinElmer VesselVue User manual

PerkinElmer

PerkinElmer TORION T-9 User manual

PerkinElmer

PerkinElmer Lambda 465 User manual

PerkinElmer

PerkinElmer Migele User manual

PerkinElmer

PerkinElmer CLARUS 590 GC User manual

PerkinElmer

PerkinElmer clarus 500 gc User manual

PerkinElmer

PerkinElmer OMNI Bead Ruptor Elite User manual

PerkinElmer

PerkinElmer TGA 8000 Assembly Instructions

PerkinElmer

PerkinElmer 200A Series User manual

PerkinElmer

PerkinElmer Spectrum RX I User manual

PerkinElmer

PerkinElmer FT-IR User manual

PerkinElmer

PerkinElmer Wallac 1420 User manual

PerkinElmer

PerkinElmer Lambda 365 User manual

PerkinElmer

PerkinElmer CLARUS 680 GC User manual

PerkinElmer

PerkinElmer Frontier FT-IR User manual

PerkinElmer

PerkinElmer Raman Micro 200 Series User manual

Popular Laboratory Equipment manuals by other brands

Qiagen

Qiagen DML 3000 user manual

Queensgate

Queensgate NANOSCAN OP400 Quick start instructions

Conviron

Conviron GEN1000-GE Operator's manual

Parr Instrument

Parr Instrument 4560 Operating instructions manual

IKA

IKA IC control operating instructions

Integra

Integra DOSE IT operating instructions

Agilent Technologies

Agilent Technologies 5800 ICP-OES user guide

Endress+Hauser

Endress+Hauser Cleanfit CPA875 operating instructions

NI PXI-5422 CALIBRATION PROCEDURE

Collomix

Collomix Aqix operating instructions

SPEX SamplePrep

SPEX SamplePrep 6875 Freezer/Mill Series operating manual

Ocean Insight

Ocean Insight FLAME-NIR+ Installation and operation manual

Parker

Parker ALIGN-MG-NA Installation, operation and maintenance manual

BD 644787 user guide

DENTAURUM

DENTAURUM Compact Megaplus Instructions for use

Biuged Laboratory Instruments

Biuged Laboratory Instruments BGD 626 instruction manual

VWR

VWR SAS Super IAQ instruction manual

illumina

illumina MiSeqDx reference guide