Peerless-AV LCH-100 Guide

2300 White Oak Circle • Aurora, Il 60502 • (800) 865-2112 • Fax: (800) 359-6500 • www.peerless-av.com

ISSUED: 09-30-02 SHEET #: 090-9085-6 07-23-13

Installation and Assembly - Monitor Desktop Stand Models: LCH-100

LCH-100

IMPORTANT! Read entire instruction sheet before you start installation and assembly.

NOTE: You may not use all hardware provided.

NOTE: Some parts may not appear exactly as illustrated.

LOCK BALL

IMPORTANT! The product is made to support screens with a Vesa compliant hole pattern.

For safe mounting, mounting screws must turn at least three times in the screen inserts.

SPRING LOADED PRODUCT

• Only release lock ball when screen is

installed. Do not place chin or object

above pole when releasing lock ball.

WARNING

LCH-100

Description Qty. Part #

telescopic pedestal 1 091-1088

Bpivot head 1 091-1090

Cmounting base 1 091-1089

Dadapter plate 1 095-1100

EM4 x 8mm countersink screw 4520-1795

FM4 x 10mm phillips screw 4520-1796

Gwood screw #14 x 1 4510-9159

Hhex bolt 1 -

Ihex nut 1 -

JM4 x 0.7mm nut 4 530-1082

Kpressure plate 1 -

Lnylon washer 1 540-1636

M4mm allen wrench 2 560-0072

N3mm allen wrench 1 560-0073

Parts List

MAX Load Capacity:

25 lb (11.4KG)

ISSUED: 09-30-02 SHEET #: 090-9085-6 07-23-13

2 of 5

DESKTOP

Insert telescopic pedestal (A) into mounting base (C).

Tighten set screws where shown with 3 mm allen wrench (N).

Mark hole on desktop for positioning mount.

Drill one 1/2" dia. hole through desktop. Attach

mounting base (C) to desktop using hex bolt (H),

pressure plate (K), and hex nut (I). Tighten nut

using proper sized wrench.

Important! Mount is to be installed onto desktops

3/4" to 1-5/8" thick only! For thicker mounting

surfaces, you may have to provide your own

hardware.

There are two methods of installation. Follow step 1 for installation using hex bolt and pressure plate or

step 2 using four wood screws. Use four holes on mounting base (C) to mark holes

on desktop for positioning mount. Drill four 3/16"

dia. holes through desktop. Attach mounting base

SET SCREWS

• Mount must be installed on wood and/or wood composition surfaces of at least 3/4" thick. However, the installer

must ensure that the mounting surface will safely hold the combined weight of the mount and the screen. See other

mounting requirements below.

CAUTION

ISSUED: 09-30-02 SHEET #: 090-9085-6 07-23-13

3 of 5

GENERIC LCD SCREEN

To install to a VESA 75 mm standard LCD monitor,

attach pivot head (B) to back of LCD monitor using four

M4 x 10 mm phillips screws (F) as shown.

Skip to step 6.

GENERIC LCD SCREEN

To install to a VESA 100 mm standard LCD monitor, attach

adapter plate (D) to pivot head (B) using four M4 x 8 mm

phillips screws (E) and four M4 x 0.7mm nuts (J) as shown in

detail 1. Attach pivot head (B) to back of LCD monitor using

four M4 x 10 mm phillips screws (F) as shown in detail 2.

DETAIL 1 DETAIL 2

ISSUED: 09-30-02 SHEET #: 090-9085-6 07-23-13

4 of 5

Place nylon washer (L) and pivot head (B) on top pin

of telescopic pedestal (A) as shown. To restrict rotation

of LCD screen to 90°, lineup rear set screw with slot

and tighten where shown in detail 3 using 3 mm allen

wrench (N). To completely restrict rotation, tighten rear

set screw using 3 mm allen wrench (N).

SET SCREWS

SLOT

REAR SET

SCREW

DETAIL 3

Turn tube nut counterclockwise to loosen. Gently hold pivot head

(B) down with one hand, and gently press on lock ball with the other

hand. Lock ball must be inserted into outer tube to obtain up and down

movement. Do not insert lock ball all the way into the inner tube.

Adjust to desired height making sure to locate lock ball into one the

four holes as shown.

NOTE: Setting the lock ball in the lowermost hole requires the removal

of the inner white plastic ring. To do this set the lock back in a

different hole. Slowly unscrew the tube nut until it comes off threads.

Remove the white plastic ring inside the tube nut. Retighten the tube

nut. Adjust the height until the lock ball reaches the lowermost hole.

TUBE NUT LOCK BALL

BACK VIEW

INNER TUBE

OUTER TUBE

ISSUED: 09-30-02 SHEET #: 090-9085-6 07-23-13

5 of 5

Route cord(s) through cable clips for cord management.

Note: Ensure the cords have enough slack for proper clearance

and function.

Turn screen clockwise by hand for landscape or portrait

orientation.

CABLE

CLIPS MONITOR

CORD(S)

For tilt adjustment use one 4 mm allen wrench (M) to

hold socket screw in place and the other 4 mm allen

wrench (M) to turn the socket screw clockwise to tighten

and counterclockwise to loosen as shown.

MSOCKET

SCREW

All other brand and product names are trademarks or registered trademarks of their respective owners.

Table of contents

Other peerless-AV Rack & Stand manuals

peerless-AV

peerless-AV MOD-FCS2KIT300 User manual

peerless-AV

peerless-AV MOD-PRGKIT100-B User manual

peerless-AV

peerless-AV DS-LEDM Series User manual

peerless-AV

peerless-AV SMARTMOUNT Series Instruction manual

peerless-AV

peerless-AV SUF641 Guide

peerless-AV

peerless-AV SS575K User manual

peerless-AV

peerless-AV SUA746PU User manual

peerless-AV

peerless-AV WBK100 Guide

peerless-AV

peerless-AV SMARTMOUNT ST660 User manual

peerless-AV

peerless-AV DS-S555-3X2 User manual

peerless-AV

peerless-AV ACC-DHK User manual

peerless-AV

peerless-AV SUA751PU User manual

peerless-AV

peerless-AV LCT620AD Guide

peerless-AV

peerless-AV SUA737 Guide

peerless-AV

peerless-AV SP740P User manual

peerless-AV

peerless-AV SMARTMOUNT SP850 User manual

peerless-AV

peerless-AV SR555E User manual

peerless-AV

peerless-AV DS-VW765-LQR Guide

peerless-AV

peerless-AV PA762-UNMH User manual

peerless-AV

peerless-AV SMARTMOUNT SF630-AB User manual

peerless-AV

peerless-AV IM760P User manual

peerless-AV

peerless-AV ACC166 User manual

peerless-AV

peerless-AV SmartMountXT STX660P User manual

peerless-AV

peerless-AV HT642-004 Guide

Popular Rack & Stand manuals by other brands

Salamander

Salamander Acadia AC/W/L400/WH Assembly instructions

Fohhn

Fohhn VAT-09 Mounting instruction

ricoo

ricoo FS0522 quick start guide

AMSOIL

AMSOIL BMK-22 Installation and service instructions

Kargo Master

Kargo Master 48220 installation guide

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 installation instructions

ricoo

ricoo S1222 installation instructions

Ready-Set-Mount

Ready-Set-Mount RSMCM602 instruction manual

VidaBox

VidaBox VB MNT FFS2 installation guide

Welch Allyn

Welch Allyn 48960 Assembly instructions

Arkon

Arkon CM035-ST-2 installation instructions

PROEL

PROEL PLWIN60C user manual

Agilent Technologies

Agilent Technologies E2609B installation guide

Mustang

Mustang MV-ARM4 installation guide

Mounting Solutions

Mounting Solutions WRM-320 manual

Pyle

Pyle PMKSPAD1 manual

ShelterIt

ShelterIt 21208 installation instructions

SPL

SPL RackPack?4 1040 manual 

peerless-AV LCH-100 Guide

Popular Rack & Stand manuals by other brands