Patton electronics SmartNode 4634 Series User manual

SmartNode 4634 and 4638 Series

VoIP Gateway Routers

Quick Start Guide

Approval

—This device is approved for connection to the public ISDN telecommunication network,

over BRI/S0-ISDN interfaces.

Zulassung

—Zugelassen für die Anschaltung an das öffentliche ISDN Telekommunikationnetz an

BRI/S0-ISDN Schnittstellen.

Aprobación

—Este aparato está aprobado para conexión a red publica ISDN sobre interfaz BRI/S0.

Approbation

—Cet appareil est approuve pour la connexion au reseau ISDN public avec les interfaces

BRI/S0.

Document Number: 13221U7-001 Rev. B

Part Number: 07MSN4630-QS

Revised: November 17, 2008

Sales Ofﬁce: +1 (301) 975-1000

Technical Support: +1 (301) 975-1007

E-mail: [email protected]

WWW: www.patton.com

SmartNode 4634 & 4638 Quick Start Guide

1.0 Power up the SmartNode

Connect the SmartNode to the mains (AC) power source with the power cable.

Wait until the

Power

LED stops blinking and remains constantly lit. Now the SmartNode is ready

to conﬁgure.

2.0 Connecting the SmartNode to your laptop PC

•

This device contains no user serviceable parts. The equipment shall be

returned to Patton Electronics for repairs, or repaired by qualiﬁed ser-

vice personnel.

•

Mains Voltage: Do not open the case the when the power cord is

attached. Line voltages are present within the power supply when the

power cords are connected. The mains outlet that is utilized to power

the devise shall be within 10 feet (3 meters) of the device, shall be eas-

ily accessible, and protected by a circuit breaker.

•

Ensure that the power cable used meets all applicable standards for the

country in which it is to be installed, and that it is connected to a wall

outlet which has earth ground.

•

For units with an external power adapter, the adapter shall be a listed

Limited Power Source.

•

Hazardous network voltages are present in WAN ports regardless of

whether power to the unit is ON or OFF. To avoid electric shock, use

caution when near WAN ports. When detaching the cables, detach the

end away from the device ﬁrst.

•

Do not work on the system or connect or disconnect cables during peri-

ods of lightning activity.

The interconnecting cables shall be acceptable for external use and shall be rated for

the proper application with respect to voltage, current, anticipated temperature, ﬂam-

mability, and mechanical serviceability.

WARNING

CAUTION

SmartNode 4634 & 4638 Quick Start Guide

Figure 1.

Connecting to the PC

Connect the PC’s Ethernet port to

LAN (ETH

0/1)

port of the SmartNode 4630. The SmartNode 4630

Series is equipped with Auto-MDX Ethernet ports, so you can use straight-through Ethernet cables for host

or hub/switch connections. (See

ﬁgure 1

The SmartNode comes with a built-in DHCP server to simplify conﬁguration. Therefore, to automatically

conﬁgure the PC for IP connectivity to the SmartNode, conﬁgure the laptop PC for DHCP. The SmartNode

will provide the PC with an IP address.

Check the connection to the SmartNode by executing the

ping

command from the PC command window

as follows:

ping 192.168.1.1

3.0 Conﬁguring the desired IP address

3.1 Factory-default IP settings

The factory default conﬁguration for the Ethernet interface IP addresses and netmasks are listed in

table 1

Both Ethernet interfaces are activated upon power-up. LAN interface

ETH 0/1 (LAN)

provides a default DHCP

server. The WAN interface uses DHCP client to get the IP address and netmask automatically from the

service provider.

If these addresses match with those of your network, go to section

4.0 “Connecting the SmartNode to the

network”

on page 4. Otherwise, continue with the following sections to change the addresses and

network masks.

Table 1.

Factory default IP address and network mask conﬁguration

Item IP Addresss Network Mask

WAN interface Ethernet 0 (ETH 0/0) DHCP DHCP

LAN interface Ethernet 1 (ETH 0/1) 192.168.1.1 255.255.255.0

DHCP server address range (LAN) 192.168.1.10-192.168.1.19 255.255.255.0

Straight-through wired cable

LAN (ETH 0/1)

Laptop PC

SmartNode 4634 & 4638 Quick Start Guide

3.2 Login

To access the SmartNode, start the Telnet application on your PC. Type the default IP address into the

address ﬁeld:

192.168.1.1

. Accessing your SmartNode via a Telnet session displays the login screen.

Type the factory default login:

administrator

and leave the password empty. Press the

Enter

key after the

password prompt.

administrator

password:<Enter>

192.168.1.1>

After you log in, your SmartNode will be running in operator execution mode (indicated by > character

in the command line prompt). To enter conﬁguration mode, use the commands

enable

and

conﬁgure

192.168.1.1>

enable

192.168.1.1#

configure

192.168.1.1(cfg)#

3.3 Changing the WAN IP address

To modify IP conﬁguration settings, you must enter

context IP

mode. Enter the following command:

192.168.1.1(cfg)#

context ip router

192.168.1.1(ctx-ip)[router]#

Now you can set your IP address and network mask for the interface

ETH 0/0(WAN)

. In this example a

network 172.16.1.0/24 is assumed. The IP address in example is set to

172.16.1.99

. (You should set it

to the IP address that the network provider has given you.)

Note

The examples in this guide use a private IP network with the network address

172.16.1.0/24

192.168.1.1(ctx-ip)[router]#

interface eth0

192.168.1.1(if-ip)[eth0]#

ipaddress 172.16.1.99 255.255.255.0

2002-10-29T00:09:40 : LOGINFO : Link down on interface eth0.

2002-10-29T00:09:40 : LOGINFO : Link up on interface eth0.

172.16.1.99(if-ip)[eth0]#

Copy this modiﬁed conﬁguration to your new start-up conﬁguration. This will store your changes in non-

volatile memory. On the next start-up the system will initialize itself using the modiﬁed conﬁguration.

172.16.1.99 (if-ip)[eth0]#

copy running-config startup-config

172.16.1.99 (if-ip)[eth0]#

The SmartNode can now be connected to your network.

4.0 Connecting the SmartNode to the network

The interconnecting cables shall be acceptable for external use and shall be rated for

the proper application with respect to voltage, current, anticipated temperature, ﬂam-

mability, and mechanical serviceability.

CAUTION

SmartNode 4634 & 4638 Quick Start Guide

In general, the SmartNode will connect to the network via the

WAN (ETH 0/0)

port. This enables the SmartNode

to offer routing services to the PC hosts on

LAN (ETH 0/1)

port. The SmartNode 4630 Series provides an auto-

MDX feature for both Ethernet ports, so you can use a straight-through or cross-over cable to connect to a host or

a switch (see

ﬁgure 2

Figure 2.

Connecting the SmartNode to the network

You can check the connection with the ping command from the SmartNode to another host on the

local LAN.

172.16.1.99(if-ip)[eth0]#ping <IP Address of the host>

Note

If the WAN address is

not

set to DHCP, to ping a device outside your local LAN you must ﬁrst conﬁgure

the default gateway. (For information on conﬁguring the default gateway, refer to section “Set IP

addresses” in Appendix C, “Command Summary” of the

SmartNode Series SmartWare Software Conﬁg-

uration Guide

5.0 Loading the conﬁguration (optional)

Patton provides a collection of conﬁguration templates on the CD-ROM shipped with your SmartNode device—

and also on the support page at

www.patton.com/voip

—one of which may be similar enough to your

application that you can use it to speed up conﬁguring the SmartNode. Simply download the conﬁguration note

that matches your application to your PC. Adapt the conﬁguration as described in the conﬁguration note to your

network (remember to modify the IP address) and copy the modiﬁed conﬁguration to a TFTP server. The Smart-

Node can now load its conﬁguration from this server.

Straight-through wired

or crossover cable LAN (ETH 0/1)

LAN

WAN (ETH 0/0)

Network

SmartNode 4634 & 4638 Quick Start Guide

Note

Patton regularly adds new conﬁguration templates to the collection at

www.patton.com/voip

, so if

you do not see your application on the CD-ROM, it may have been added to the website.

Note

If your application is unique and not covered by any of Patton’s conﬁguration templates, you can man-

ually conﬁgure the SmartNode instead of loading a conﬁguration ﬁle template. In that case, refer to

the

SmartNode Series SmartWare Software Conﬁguration Guide

for information on conﬁguring the Smart-

Node device.

In this example we assume an TFTP server resides on the host with the IP address 172.16.1.11 and the conﬁgu-

ration ﬁle named

SN.cfg

resides in the root directory of the TFTP server.

172.16.1.99(if-ip)[eth0]#

copy tftp://172.16.1.11/SN.cfg startup-

config

Download...100%

172.16.1.99(if-ip)[eth0]#

After you reboot the SmartNode the new startup conﬁguration will become active.

172.16.1.99(if-ip)[eth0]#

reload

Running configuration has been changed.

Do you want to copy the 'running-config' to the 'startup-config'?

Press 'yes' to store, 'no' to drop changes :

Press 'yes' to restart, 'no' to cancel :

yes

The system is going down

6.0 Additional Information

Refer to the

SmartNode Series SmartWare Software Conﬁguration Guide

and the

SmartNode Getting Started Guide

located on the CD-ROM shipped with your SmartNode device and available online at

www.patton.com/

manuals.

For detailed information about:

•

Installing, conﬁguring, operating, and troubleshooting.

•

Warranty, trademark & compliance

The CD-ROM also includes many freeware and shareware tools, including TFTP servers, and Telnet clients.

A.0 Customer and Technical Support

Toll-Free VoIP support: call

sip:[email protected]

with a VoIP SIP client

Online support: www

.patton.com

E-mail support:

[email protected]

—answered within 1 business day

When you issue the reload command, the SmartNode will ask if you want to copy the

running conﬁguration to the startup conﬁguration. Since you just downloaded a con-

ﬁguration ﬁle to the startup conﬁguration you must answer this question with

Otherwise, the downloaded conﬁguration will be overwritten and lost!

IMPORTANT

SmartNode 4634 & 4638 Quick Start Guide

Telephone support:

•

Standard: +1 (301) 975-1007 (USA), Monday–Friday: 8:00 am to 5:00 pm EST (1300 to

2200 UTC/GMT)

•

Alternate: +41 (0)31 985 25 55 (Switzerland), Monday–Friday: 8:00 am to 5:00 pm CET (0900 to 1800

UTC/GMT)

Fax:

+1 (253) 663-5693 (USA) or +41 (0)31 985 25 26 (Switzerland)

B.0 Compliance Information

B.1 Compliance

EMC Compliance:

•FCC Part 15, Class A

•EN55022, Class A

•EN55024

Safety Compliance:

•UL60950-1/CSA C22.2 No. 60950-1

•IEC/EN 60950-1

•AS/NZS 60950-1

PSTN Regulatory Compliance:

•TBR3

•AS/ACIF S031

B.2 Radio and TV interference

The SmartNode router generates and uses radio frequency energy, and if not installed and used properly—that

is, in strict accordance with the manufacturer’s instructions—may cause interference to radio and television

reception. The SmartNode router have been tested and found to comply with the limits for a Class A computing

device in accordance with speciﬁcations in Subpart B of Part 15 of FCC rules, which are designed to provide rea-

sonable protection from such interference in a commercial installation. However, there is no guarantee that

interference will not occur in a particular installation. If the SmartNode router does cause interference to radio or

television reception, which can be determined by disconnecting the unit, the user is encouraged to try to correct

the interference by one or more of the following measures: moving the computing equipment away from the

receiver, re-orienting the receiving antenna and/or plugging the receiving equipment into a different AC outlet

(such that the computing equipment and receiver are on different branches).

8SmartNode 4634 & 4638 Quick Start Guide

B.3 ISDN compliance

This device is approved for connection to the public ISDN telecommunication network.

B.4 CE Declaration of Conformity

Product Description: SmartNode 4630 Series

This equipment conforms to the requirements of Council Directive 1999/5/EC on the approximation of the laws

of the member states relating to Radio and Telecommunication Terminal Equipment and the mutual recognition

of their conformity.

The signed Declaration of Conformity can be downloaded from www.patton.com/certiﬁcations/.

B.5 Authorized European Representative

D R M Green

European Compliance Services Limited.

Avalon House, Marcham Road

Abingdon,

Oxon OX14 1UD, UK

B.6 Zulassung

Zugelassen fur die Anschaltung an das öffentliche ISDN Telekommunikationnetz an BRI/S0-ISDN Schnittstellen.

When this device is used in North America, it shall be connected to a Network Termina-

tion Device and not connected directly to an outside POTS line.

The safety advice in the documentation accompanying the products shall be obeyed.

The conformity to the above directive is indicated by the CE sign on the device.

CAUTION

SmartNode 4634 & 4638 Quick Start Guide 9

The information in this document is subject to change without notice. Patton Electronics assumes no

liability for errors that may appear in this document.

Trademarks statement

The term SmartNode is a trademark of Patton Electronics Company. All other trademarks presented in this docu-

ment are the property of their respective owners.

Warranty, Trademark, & Compliance Information

For warranty, trademark and compliance information, refer to the Models SN4630 Series Getting Started Guide

located on the CD-ROM that came with your VoIP Gateway Router or available online at www.patton.com.

In accordance with the requirements of council directive 2002/96/EC on Waste of

Electrical and Electronic Equipment (WEEE), ensure that at end-of-life you separate

this product from other waste and scrap and deliver to the WEEE collection system in

your country for recycling.

10 SmartNode 4634 & 4638 Quick Start Guide

Notes

____________________________________________________________________

This manual suits for next models

Table of contents

Other Patton electronics Network Router manuals

Patton electronics

Patton electronics IM2RC/IA User manual

Patton electronics

Patton electronics 3224 Diamond Edge User manual

Patton electronics

Patton electronics DIAMONDLINK 3201 User manual

Patton electronics

Patton electronics 2135 User manual

Patton electronics

Patton electronics Patton IPLink 2635 User manual

Patton electronics

Patton electronics DIAMONDLINK 3201 User manual

Patton electronics

Patton electronics IpLink 2884 User manual

Patton electronics

Patton electronics IPLink 2823 User manual

Patton electronics

Patton electronics SL4020 User manual

Patton electronics

Patton electronics IPLink 2803 User manual

Patton electronics

Patton electronics IPLink 3210 Series User manual

Patton electronics

Patton electronics SMARTNODE 4552 User manual

Patton electronics

Patton electronics SMARTNODE 4630 Series User manual

Patton electronics

Patton electronics 2121 User manual

Patton electronics

Patton electronics ONSITE 2603 User manual

Patton electronics

Patton electronics SmartNode 4830 Series User manual

Patton electronics

Patton electronics SMARTNODE 4900 User manual

Patton electronics

Patton electronics ONSITE 2621 User manual

Patton electronics

Patton electronics SMARTNODE 4552 User manual

Patton electronics

Patton electronics 4020 Series User manual

Patton electronics

Patton electronics SmartLink 4020 Series User manual

Patton electronics

Patton electronics IM 1/I User manual

Patton electronics

Patton electronics SmartNode 4520 Series User manual

Patton electronics

Patton electronics OnSite 2800 Series User manual

Popular Network Router manuals by other brands

Allnet

Allnet ALL0333AU user guide

HomeSeer

HomeSeer HT-SEL Getting started guide

Sercomm

Sercomm Genesis OC3505D Quick installation guide

Billion

Billion BIPAC 5102 Series user manual

TP-Link

TP-Link TD-8817 QIG

Motorola

Motorola MR1900 user guide

Digi

Digi IX14 user guide

Cisco

Cisco NCS 540 Hardware installation guide

XAVi

XAVi X8821e user manual

BEC

BEC 6200WZL Quick installation guide

MikroTik

MikroTik hAP ac3 Series quick start

Korenix

Korenix JetNet 5428G Series user manual

NETGEAR

NETGEAR FS526T - Switch installation guide

Korenix

Korenix JetNet 5710G Series user manual

Automated Logic

Automated Logic ZN551 Technical instructions

Cisco

Cisco ASR 1000 Series Installation and configuration guide

EnGenius

EnGenius ESR-9710 quick start guide

Cisco

Cisco 805 Series Product overview