PARKZONE Radian Pro DX7 Manual

Radian Pro DX7/7se Setup

With the DX7 you can take full advantage of the possible mixing options on the Radian Pro.

This setup allows for CROW, camber and reflex, and normal flaps to be programmed into the

radio.

The setup listed has the flaps operated by the AUX 2 switch on the DX7. The 3-position flaps

switch controls the camber and reflex and the gear switch activates the CROW.

This setup uses a 6 channel receiver. If a 7 channel receiver is used, for the mixing to work

correctly, the flaps must use the Y-Harness.

CAUTION: When setting up the airplane with the airplane turned on, it

is advisable to unplug the motor or remove the propeller to prevent the

motor from accidentally going to full throttle, if throttle is selected when

setting up one of the mixes.

Setting up Dual Aileron

In the main setup menu, turn FLAPERON to ON.

Reversing

Throttle: normal

Aileron: reverse

Elevator: reverse

Rudder: reverse

Gear: normal

Flap: reverse

AUX2: normal

Setting up the Flaps on the Gear Channel

Adjust the travel adjust on the gear so when the gear switch is in the up position the flaps are

even with the trailing edge of the wing. When the gear switch is moved to the down position,

set the value to give the amount of flap throw listed in the manual.

Setting up the Aileron for Camber and Reflex

1. Go to the FLAP SYS menu

2. Set the NORM to U 20%

3. Set MID to 0%

4. Set LAND to DN 20%

These values give the amount of up and down aileron when using the camber and

reflex.

Setting up Aileron for CROW

1. Go to PROG. MIX 1

2. Activate the mix

3. Select GEAR  FLAP

4. On the rate, set switch position 0 to 0%

5. Set the 1 position to 80%

6. Set switch to ON (SW: ON)

This mixes the flaps to the gear channel allowing you to set up the CROW. The number you

select for the #1 position will control how much up aileron you will have when CROW is

engaged.

Setting up Flaps for Camber and Reflex

1. Go to PROG. MIX 2

2. Activate the mix

3. Select FLAP  GEAR

4. On the rate, set position 0 to -50%

5. On the rate, set position 1 to -50%

6. Set switch to ON (SW: ON)

This mixes the flaps with the aileron to give you the amount of up and down flap when using

the camber and reflex. This adjusts the amount of reflex or camber you would adjust with this

mix and the FLAP SYS values to have the flaps and aileron moving the same distance up and

down.

Setting up Flaps

1. Go to PROG. MIX 3

2. Activate the mix

3. Select AUX 2  GEAR

4. On the rate, set switch 0 to 0%

5. On the rate, set position 1 to +100%

6. Set switch to ON (SW: ON)

7. This mix puts the flaps onto the AUX 2 switch for simple flaps.

Setting up Elevator Compensation for the CROW

1. Go to PROG. MIX 4

2. Activate the mix

3. Select GEAR  ELEV

4. On the rate, set switch 0 to 0%

5. On the rate, set position 1 to -15%

6. Set switch to ON (SW: ON)

This mixes the elevator to the gear switch that controls CROW to allow for elevator

compensation when CROW is activated. Adjust the #1 position to fine- tune the amount of

down elevator required when CROW is activated.

Setting up Elevator Compensation for the Flaps

1. Go to PROG. MIX 5

2. Activate the mix

3. Select AUX 2  ELEV

4. On the rate, set switch 0 to 0%

5. On the rate, set position 1 to -15%

6. Set switch to ON (SW: ON)

This mixes the elevator to the AUX 2 switch that controls flaps to allow for elevator

compensation when the flaps are activated. Adjust the #1 position to fine- tune the amount of

down elevator required when the flaps are activated.

This manual suits for next models

Table of contents

Other PARKZONE Toy manuals

PARKZONE

PARKZONE F-27C Stryker User manual

PARKZONE

PARKZONE Typhoon 3D User manual

PARKZONE

PARKZONE Radian RTF User manual

PARKZONE

PARKZONE Ultra Micro DH 98 Mosquito Mk VI User manual

PARKZONE

PARKZONE S.E.5a User manual

PARKZONE

PARKZONE Ember2 BNF User manual

PARKZONE

PARKZONE Habu BNF User manual

PARKZONE

PARKZONE Spitfire Mk IIB RTF User manual

PARKZONE

PARKZONE Typhoon 2 3D User manual

PARKZONE

PARKZONE ArtiZan User manual

PARKZONE

PARKZONE Ultra Micro Pole Cat User manual

PARKZONE

PARKZONE Ultra Micro DH 98 Mosquito Mk VI User manual

PARKZONE

PARKZONE F-27B Stryker User manual

PARKZONE

PARKZONE Radian User manual

PARKZONE

PARKZONE ICONA5 User manual

PARKZONE

PARKZONE Vapor BNF User manual

PARKZONE

PARKZONE Ka-8 Manual

PARKZONE

PARKZONE Ultra Micro DH 98 Mosquito Mk VI User manual

PARKZONE

PARKZONE P-51D Mustang User manual

PARKZONE

PARKZONE T-28 Trojan User manual

PARKZONE

PARKZONE PKZ3600 User manual

PARKZONE

PARKZONE Radian User manual

PARKZONE

PARKZONE Extra 300 PNP/BNF User manual

PARKZONE

PARKZONE Typhoon 3D User manual

Popular Toy manuals by other brands

marklin

marklin 37321 instruction manual

Canon

Canon PAPER CRAFT Assembly instructions

GREAT PLANES

GREAT PLANES Pitts M-12S instruction manual

NOCH

NOCH 14261 manual

Hausler

Hausler 450 SE V2 quick start

Dynaflite

Dynaflite Daydream instruction manual

MiniacRC

MiniacRC MIGHTY MINI P40 WARHAWK Build instructions

Kenner

Kenner Batman 63651 instructions

LEGO

LEGO 8527 instructions

iKarus

iKarus ECO 8 Assembly instruction

Multiplex

Multiplex EasyStar II Building instructions

Walkera

Walkera 38 User handbook

Hasbro

Hasbro TRANSFORMERS BUMBLEBEE manual

MD MXION SWD user manual

Mattel

Mattel Disney Pixar Cars Cozy Cone Spiral Rampway instructions

marklin

marklin 39671 user manual

Meccano

Meccano 15103 instructions

LEGO

LEGO TECHNIC 8735 instructions