Paradox K32LCD+ User manual

Printed in Canada | 02/2019 PARADOX.COM

Technical Specifications

Warranty

Warranty: For complete warranty information on this product, please refer to the Limited Warranty

Statement found on paradox.com. Your use of the Paradox product signifies your acceptance of all

warranty terms and conditions.

© 2019 Paradox Ltd. All rights reserved. Specifications may change without prior notice.

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired

operation.

K32LCD+ Keypad

Quick Install Guide

The K32LCD+ keypad allows you to configure your Paradox system through its

interface.

Installation

1. Using a flathead screwdriver, pry the front housing assembly from the

backplate.

Figure 1: Opening the K32LCD+

Operating Voltage 9 to 16Vdc

Operating Temp. -10 to 55°C (14 to 131°F)

Power Consumption Maximum current - 150mA

Dimensions 15 x 12.6 x 2.7 cm (6 x 4.9 x 1.06 in.)

Weight 230g (8.1 oz)

Humidity 5-93%

Compatibility Compatible with MG5000, MG5050, and Spectra SP series

V2.31 or higher and SP4000, SP65 V4.90 or higher.

Compliance EN50131-3 Grade 2; Environmental Class II

K32LCD+-EI01

2. If using surface mounted cabling, you will need to knock out the plastic tab (#1)

at the top or bottom of the K32LCD+ backplate in order to for the cable to pass

through, refer to Figure 3.

3. Insert needle nose pliers into the appropriate plastic tab and carefully break off.

Figure 2: Surface-mount cabling plastic tab removal

4. Mount the backplate to the wall by securing a M3.5 #6 screw in each of the

dedicated mounting holes and tamper hole while ensuring that the top is up, as

shown in Figure 3. For EN installations, use the designated mounting holes (#3).

Figure 3: K32LCD+ Backplate

5. Connect the 4-wire combus wires to the connector bus, as shown.

Figure 4: Wiring

6. Assemble both items by joining the hooks on the backplate to their respected

slots on the front housing assembly.

7. Secure the front housing to the backplate by snapping it into place.

The installation process is now complete.

Compatibility

The K32LCD+ is compatible with Magellan and Spectra Series control panels only.

Please refer to the Technical Specifications section for more details.

1

2 2

3

1

2

33

3

Cable pass-through

2

EN Wall Tamper

Plastic tab

EN mounting holes

Mounting holes

3

Other manuals for K32LCD+

3

Other Paradox Security System manuals

Paradox

Paradox SP6000 Operating instructions

Paradox

Paradox ESPRIT 728 ULT Operating instructions

Paradox

Paradox MG5000 User manual

Paradox

Paradox MAGELLAN MG6250 User manual

Paradox

Paradox Digiplex NE DGP-NE96 Operating instructions

Paradox

Paradox Digiplex DGP-848 Operating instructions

Paradox

Paradox SR120 User manual

Paradox

Paradox DGP2-641 User manual

Paradox

Paradox Esprit 727 User manual

Paradox

Paradox Esprit 727 Service manual

Paradox

Paradox StayD Series User manual

Paradox

Paradox MG5050+ Operating instructions

Paradox

Paradox IP100 User manual

Paradox

Paradox ESPRIT 728 ULT User manual

Paradox

Paradox Spectra SP Series Instruction manual

Paradox

Paradox K656 Touch Sense User manual

Paradox

Paradox Magellan MG5050E User manual

Paradox

Paradox STAY D MG5000 User manual

Paradox

Paradox DGP2-641 User manual

Paradox

Paradox MG5000 User manual

Paradox

Paradox Magellan MG5075 User manual

Paradox

Paradox ParaVox User manual

Paradox

Paradox MG5000 Operating instructions

Paradox

Paradox SP5500 Operating instructions

Popular Security System manuals by other brands

Inner Range

Inner Range Concept 2000 user manual

Climax

Climax Mobile Lite R32 Installer's guide

CADDX

CADDX NX-6 user manual

FBII

FBII XL-31 Series installation instructions

Johnson Controls

Johnson Controls PENN Connected PC10 Install and Commissioning Guide

Aeotec

Aeotec Siren Gen5 quick start guide

Blaupunkt

Blaupunkt SA 2700 quick start guide

IDEAL

IDEAL Accenta Engineering information

AJAX

AJAX DoubleButton user manual

Swann

Swann SW-P-MC2 Specifications

Ecolink

Ecolink Siren+Chime user manual

Digital Monitoring Products

Digital Monitoring Products XR150 user guide

EDM

EDM Solution 6+6 Wireless-AE installation manual

Highway Safety Group

Highway Safety Group EA401 user manual

Siren

Siren LED GSM operating manual

Detection Systems

Detection Systems 7090i Installation and programming manual

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 instructions

Siemens

Siemens FDM273 manual