Panasonic KX-HCM10 User manual

Please read this manual before using and save this manual for future reference.

Panasonic Network Camera Site: http://www.panasonic.com/netcam



for customers in the USA or Puerto Rico

Operating Instructions

Additional Feature table

The features described below are added in accordance with our modifications in

the product specifications. Read both Operating Instructions manuals before

starting to use the product.

Additional Feature Page

Viewing Buffered Image Screen

Images can be buffered in the internal memory of the Network

Camera. They can be viewed by clicking [Start Capture] on

Capture screen. Alarm/Timer mode in the Image Transfer on

page 12 can also buffer images.

Page 4—Page 5

Viewing still images on your mobile phone

Acompatiblemobilephoneallowsyou toviewstillimagesover

the Internet aswell as control the motionand zoom settings of

the camera (depends on model).

Page 6—Page 7

Some changes in the look of the Network window

(KX-HCM250 and KX-HCM270 only)

The Network Camera has some changes in the look of the

Network window: two modifications and two additions.

Page 8—Page 9

Adjusting Clock for Daylight Saving Time

Adjust Clock for Daylight Saving Time is added on Name/

Time window.

Page 10

Time Zone at Auto Adjustment

The Daylight Times in the pull-down menu for the Time Zone

at [3. Auto Adjustment] on Name/Time window have been

deleted.

Page 11

Transferring Camera Images

The Network Camera can buffer images and send them via E-

mail or FTP by configuring Image Transfer. Capture, Alarm

and Timer can be used simultaneously by checking [Enable]

for Controls on each of their Image Transfer windows.

Page 12—Page 14

Using the Preset Control (Except KX-HCM8)

Pan/Tilt/Preset Control on the Camera Setup window is

divided into two controls: Pan/Tilt Control and Preset Control.

Preset Control can be enabled or disabled independently.

Page 15

Operating Instructions

Note

HCM logos on all window backgrounds are deleted.

Digital Zoom (KX-HCM280 only)

The 2x digital zoom feature is added. The Network Camera

hasa 42x magnifying capacity: the 21x magnifying capacity of

the optical zoom and 2x magnifying capacity of the digital

zoom.

Page 16

Using the Color Night View (KX-HCM280 only)

The Color Night View of the Network Camera enables you to

view color images of objects even in the dark.

Page 17

Default Setting List ............................................................ Page 18

Additional Feature Page

Operating Instructions

Viewing Buffered Image Screen

Images can bebuffered in the internal memory of the Network Camera. They can

be viewed by clicking [Start Capture] on Capture screen. Alarm/Timer mode in

the Image Transfer on page 12 can also buffer images.

The look of Buffered Image on the operation bar differs depending on the setting

for Trigger Setting on Image Transfer window. The names of enabled trigger

settings will be displayed as follows. Refer to page 12 about the Image Transfer

feature.

The screen differs depending on

clicking [Alarm] or [Timer] on



the operation bar.The screen



on the left shows Alarm.

The current images will be



buffered in the internal memory



of the Network Camera.

Added

Capture, Alarm and



Timer are all enabled.

Capture alone



is enabled.

Operating Instructions

Notes

• The refresh interval becomes longer as more clients access the

Network Camera.

• The image resolution, image quality and object situation affect the

number of frames in the buffered image.

• If internal memory is filled after clicking [Start Capture], the image

buffering will stop automatically.

• If [Start Capture] is clicked again, buffered images will be all erased,

and new images will be buffered in the internal memory.

• If [Start Capture] is started on one PC while viewing buffered images

on another, the images will be overwritten.

• The internal memory will be divided by the number of trigger settings in

Image Transfer. If all three trigger settings are enabled, the Network

Cameracanbufferapproximately26frames(KX-HCM8/KX-HCM10)or

186 frames (KX-HCM230/KX-HCM250/KX-HCM270/KX-HCM280) for

each trigger setting at a resolution of 320 x 240 in standard.

[Start Capture] : The images will be buffered in the internal memory of the

Network Camera. Network traffic, PC performance,

image quality and image resolution influence playing

duration time and the refresh interval of the image. The

resolution is the same as the current image settings. At a

resolution of 320 x 240 in standard, the Network Camera

buffers approximately 80 frames (KX-HCM8/KX-HCM10)

or 560 frames (KX-HCM230/KX-HCM250/KX-HCM270/

KX-HCM280).

[Primary] :[Primary] enables you to view the buffered image in the

primary time in the Alarm/Timer mode.

[Secondary] :[Secondary] enables you to view the buffered image in

the secondary time in the Alarm/Timer mode.

Operating Instructions

Viewing still images on your mobile phone

A compatiblemobile phone allows you toviewstill images over theInternet aswell

as control the motion and zoom settings of the camera (depends on model).

Enter"http://IP address (or URL):Port No./mobile" on a mobile phone and press

[OK]. (e.g., http://bob.viewnetcam.com:60001/mobile would show a camera

connected on port 60001.) A still image appears. Motion images cannot be

displayed.

(When the port number is set to 80 [default], it is not required.)

Registered presets 5-8 are available by activating the lin

on the mobile phone screen.

Pressing 1, 3, 7 or 9 on the keypad allows you to use



the first four registered preset positions (Preset 1, 2, 3



and 4).

Pressing 2, 4, 6 or 8 on some phones allows you to



pan and tilt a Network Camera in four directions:



Left, Up, Down and Right.

Tele button

( )

zooms in, and Wide button (#) zooms out

(KX-HCM280 only).

Pressing 5 will refresh the image.

160x120 resolution is displayed at the first access.



Pressing 0 switches the resolution to 320x240.

On certain compatible phones, the keypad has been



linked to the hyperlinks on the web page.

Added

Operating Instructions

Notes

• Dialing numbers(1),(3),(7)and(9)aredisplayedinascendingorder.Thelinks

for fifth to eighth preset images are displayed only with their preset names and

not with dialing numbers.

• KX-HCM10,KX-HCM230,KX-HCM250andKX-HCM270cannotuseTeleand

Wide.

• KX-HCM8 can control only Refresh and Resolution.

• Some mobile phones are not compatible with Panasonic Network Cameras.

Some phones may allow viewing only on port number 80, and some may not

support password authentication. Refer to the Network Camera Technical

Support Site at http://panasonic.co.jp/pcc/en/ for a list of mobile phone

models, and the compatibility level which has been verified with the Panasonic

Network Camera.

• Some mobile phones cannot display 320 x 240 resolution depending on their

models. Refer to the Network Camera Technical Support Site at

http://panasonic.co.jp/pcc/en for the models that Panasonic has verified

with the Network Camera.

• Some mobile phones display images not at the specified resolution but at a

decreased size.

• When Pan/Tilt/Zoom operation reaches the end, the keypad number and the

character disappear.

"(4)L" disappears.

Operating Instructions

Some changes inthe look of the Network window

(KX-HCM250 and KX-HCM270 only)

DisclosingOperatingInstructions of wirelessmodelsfrom this page

is strictly prohibited by export controls.

Please call Panasonic Customer Support(1-800-272-7033) for assistance.

We apologize for any inconvenience this may cause.

Added

Modified



Modified



OperatingInstructions

Disclosing Operating Instructions of wireless models from this page

isstrictly prohibited by export controls.

Please call Panasonic Customer Support(1-800-272-7033) for assistance.

Added

Operating Instructions

Adjusting Clock for Daylight Saving Time

Adjust Clock for Daylight Saving Time is added on Name/Time window.

Instructions for the data field

Adjust

Clock for

Daylight

Saving

Time

During Daylight Saving Time, the clock will shift one hour

forward at the set time on the Start Day, and move back one

hour at the set time on the End Day.

Note

An "s" is put between date and time of time stamp when

enabling Adjust Clock for Daylight Saving Time. The

time stamp will be attached to the transferred images by

Image Transfer feature.

Added

Other manuals for KX-HCM10

This manual suits for next models

Table of contents

Other Panasonic Security Camera manuals

Panasonic

Panasonic HX-A1M Installation and service instructions

Panasonic

Panasonic WV-SF342 User manual

Panasonic

Panasonic i-Pro WV-SF336 User manual

Panasonic

Panasonic WV-CW504SE User manual

Panasonic

Panasonic BB-HCM381A - Network Camera User manual

Panasonic

Panasonic WV-CW324LE Series User manual

Panasonic

Panasonic KX-HNC500 User manual

Panasonic

Panasonic DEHAL BL-C121 User manual

Panasonic

Panasonic WVCS854A - COLOR CCTV CAMERA User manual

Panasonic

Panasonic Super Dynamic III WV-CW380 User manual

Panasonic

Panasonic WV-SW316 User manual

Panasonic

Panasonic WV-X6531N User manual

Panasonic

Panasonic WV-CP630 User manual

Panasonic

Panasonic WV-CW504S User manual

Panasonic

Panasonic WV-SC387 User manual

Panasonic

Panasonic Machine Vision GP-MF130 User manual

Panasonic

Panasonic KX-HNC600E User manual

Panasonic

Panasonic AW-UE150WP User manual

Panasonic

Panasonic WV-SF135 User manual

Panasonic

Panasonic WVCF324 - COLOR CAMERA User manual

Panasonic

Panasonic VL-CM851BX User manual

Panasonic

Panasonic WV-SPW631LT User manual

Panasonic

Panasonic KXCCM780 - VIDEO TELCONFERENCI User manual

Panasonic

Panasonic AWHE100N - HD INTEGRATED CAMERA User manual

Popular Security Camera manuals by other brands

Okina USA

Okina USA SIR36-870VF650LP user manual

Divio

Divio NDR155PA user manual

Canon

Canon VB-C500D Specifications

Easy Access

Easy Access EasyGuard user manual

Vivotek

Vivotek FD9389-EHV-v2 Quick installation guide

TUYA

TUYA COSMO W2 manual

Eusso

Eusso UNC7500-IR Advanced installation guide

urmet domus

urmet domus 1096/204 user manual

VC VC20 series operating manual

Axis

Axis Q1614 installation guide

ieGeek

ieGeek DD201 manual

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Installation and user guide

Vicon

Vicon V662-D-1 Installation and operation guide

Grundig

Grundig GCH-K0274P owner's manual

Lorex

Lorex VANTAGE LBC7032 quick start guide

4xem

4xem WPT Specifications

Samsung

Samsung SCV-3082 Specifications

Vitek

Vitek VTC-C544 Specifications