Panasonic BL-C10E User manual

Panasonic BL-C10 Camera Installation & Configuration Guide 2

Contents

1PREREQUISITES....................................................................................................................................................................................... 3

2CAMERA CONFIGURATION ................................................................................................................................................................. 4

3ADVANCED CONFIGURATION ............................................................................................................................................................ 8

4APPENDICES............................................................................................................................................................................................ 11

Version 3.0 Series

Panasonic BL-C10 Camera Installation & Configuration Guide 3

This guide explains how to install and configure Panasonic BL-C10 camera in the local

network.

It is strongly recommended that you add only one camera at a time to the network for

configuration.

1 Prerequisites

Before the configuration check the following:

 The camera is unpacked and correctly connected to the power source and network.

 The LED indicator on the camera front side should glow green and not flashing.

The first boot cycle of a Panasonic BL-C10 camera takes about 1 minute. During the

booting process the LED indicator will be flashing. Wait until it stops flashing and

begins to glow green. If the LED color is orange, recheck the network cable

connection. (see Appendix A p.8)

 WebCCTV NVR is installed, activated, running and properly connected to the network

(see Installation manual).

 You have an exact list of IP addresses and passwords for WebCCTV NVR and network

cameras.

 The IP address of WebCCTV NVR is properly configured (see Installation manual).

 Panasonic Network Camera installation CD is available.

 Monitor, keyboard and mouse are connected to WebCCTV NVR (see Installation

manual).

You can use another PC or laptop providing they are in the same local network. Make

sure that it has an IP address in the same range as the WebCCTV NVR and the

camera.

Version 3.0 Series

Panasonic BL-C10 Camera Installation & Configuration Guide 4

2 Camera configuration

To begin the camera installation, follow the steps below:

1. Insert the Panasonic Network Camera installation CD in the WebCCTV NVR CD-RW

drive.

Camera Setup Main Screen

2. In the screen that appears click the Camera Setup button. After a short while, a list of

BL-C10 cameras, which are connected to your network, will appear.

Version 3.0 Series

Panasonic BL-C10 Camera Installation & Configuration Guide 5

Camera Easy Setup Screen

3. Select the camera that you want to configure and click the Execute button.

You are able to configure a camera during the first 20 minutes after the camera restart.

Camera Setup Choice Screen

Version 3.0 Series

Panasonic BL-C10 Camera Installation & Configuration Guide 6

4. In the window that appears choose Automatic Setup (Local Access Only).

5. Wait until the automatic setup dialog window appears. Specify the correct IP address

and subnet mask and click OK.

6. Wait until the web page appears. Specify User Name and Password and click the Save

button.

7. Next, the logon window appears. Log into the camera under the credentials you have

just specified. As a result you’ll get to the camera web page.

8. A window will appear, that informs you about setup completion. Click Next to enter

the advanced setup.

Automatic Setup Completion Screen

9. In the Camera Setup Choice screen choose Manual Setup by clicking corresponding

the button.

Manual Setup is necessary to assign a static IP address to the camera. Quadrox

strongly recommends such a configuration.

10. In the Manual Setup screen check settings and click the Save button.

Version 3.0 Series

Panasonic BL-C10 Camera Installation & Configuration Guide 7

Manual Setup Screen

11. When notified of setup completion click the Close button.

12. Close all windows and open WebCCTV NVR Web client. Log in as the administrator.

13. Go to the System menu and add your camera to WebCCTV (see WebCCTV User

manual).

14. After completing the addition and configuration process - restart WebCCTV Server as

prompted.

Version 3.0 Series

Panasonic BL-C10 Camera Installation & Configuration Guide 8

3 Advanced configuration

You are able to configure the camera using the camera’s setup page while logged onto

WebCCTV NVR. Use the Go to link from WebCCTV NVR System menu or simply specify

the camera IP address in the Internet Explorer Address field.

Quadrox recommends implementing the following settings:

 When your camera is configured as described above you are able to increase your

network security. Follow the steps below:

1. Go to the camera Setup page. Choose Network menu item.

2. Click on the link Static.

3. Disable the network configuration from the setup program by deselecting the

Enable checkbox.

This locks your network configuration, making sure that nobody can use Camera Setup

to change the camera IP address.

Cameras Setup Screen

Version 3.0 Series

Panasonic BL-C10 Camera Installation & Configuration Guide 9

 If your camera image flickers, this may be caused by interference from the indoor

lighting where the camera is located. To solve this problem adjust the AC Power

Source Frequency setting on the camera Setup page to match the frequency of your

power network as follows:

1. Go to the camera Setup page. Choose Camera menu item.

2. Choose 50 Hz for Europe or 60 Hz for USA.

Camera Setup Screen

Version 3.0 Series

Panasonic BL-C10 Camera Installation & Configuration Guide 10

 To insure uninterrupted recordings from the camera you are configuring you may

disable the privacy button that is located on the camera front panel. Follow the steps

below:

1. Go to the camera Setup page. Choose Privacy Mode menu item.

2. Deselect the Enable checkbox.

Camera Setup Screen

Version 3.0 Series

This manual suits for next models

Table of contents

Other Panasonic Security Camera manuals

Panasonic

Panasonic KX-HNC200AZ User manual

Panasonic

Panasonic WV-CF344 Series User manual

Panasonic

Panasonic IDEHAL WV-SUD638PJ User manual

Panasonic

Panasonic GPMS112 - IND CCD CAMERA User manual

Panasonic

Panasonic KX-HNC500 User manual

Panasonic

Panasonic WV-BF300 User manual

Panasonic

Panasonic AWE300 - COLOR CAMERA User manual

Panasonic

Panasonic aw-he40 series User manual

Panasonic

Panasonic AW-UE70KP User manual

Panasonic

Panasonic i-Pro WV-SFN130PJ User manual

Panasonic

Panasonic WV-CF432N1E User manual

Panasonic

Panasonic WVCW244F - COLOR CAMERA User manual

Panasonic

Panasonic WV-NP304 User manual

Panasonic

Panasonic WV-SC588 User manual

Panasonic

Panasonic WVCS574 - COLOR CCTV CAMERA User manual

Panasonic

Panasonic VL-CM851BX User manual

Panasonic

Panasonic OneHome BB-HCM311A User manual

Panasonic

Panasonic HX-A1M Installation and service instructions

Panasonic

Panasonic WV-SF549 User manual

Panasonic

Panasonic WV-CF284T User manual

Panasonic

Panasonic BL-C30A - Wireless 802.11 b/g Network Camera Guide

Panasonic

Panasonic WV-NW484S - i-Pro Network Camera User manual

Panasonic

Panasonic BB-HCM381 Operating manual

Panasonic

Panasonic WVNP244 - COLOR CCTV CAMERA User manual

Popular Security Camera manuals by other brands

Okina USA

Okina USA SIR36-870VF650LP user manual

Divio

Divio NDR155PA user manual

Canon

Canon VB-C500D Specifications

Easy Access

Easy Access EasyGuard user manual

Vivotek

Vivotek FD9389-EHV-v2 Quick installation guide

TUYA

TUYA COSMO W2 manual

Eusso

Eusso UNC7500-IR Advanced installation guide

urmet domus

urmet domus 1096/204 user manual

VC VC20 series operating manual

Axis

Axis Q1614 installation guide

ieGeek

ieGeek DD201 manual

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Installation and user guide

Vicon

Vicon V662-D-1 Installation and operation guide

Grundig

Grundig GCH-K0274P owner's manual

Lorex

Lorex VANTAGE LBC7032 quick start guide

4xem

4xem WPT Specifications

Samsung

Samsung SCV-3082 Specifications

Vitek

Vitek VTC-C544 Specifications