Panasonic AWE560 - COLOR VIDEO CAMERA User manual

Color Video Camera

AW-E560

Before attempting to connect or operate this product,

please read these instructions completely.



(Lens : Purchased locally)

Warning:

This equipment generates and uses radio frequency ener-

gy and if not installed and used properly, i.e., in strict

accordance with the instruction manual, may cause harmful

interference to radio communications. It has been tested

and found to comply with the limits for a Class A computing

device pursuant to Subpart J of Part 15 of FCC Rules,

which are designed to provide reasonable protection

against such interference when operated in a commercial

environment.

This digital apparatus does not exceed the Class A limits for

radio noise emissions from digital apparatus set out in the

Radio Interference Regulations of the Canadian Department

of Communications.

WARNING:

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

The lightning flash with arrowhead sym-

bol, within an equilateral triangle, is

intended to alert the user to the pres-

ence of uninsulated "dangerous voltage"

within the product's enclosure that may

be of sufficient magnitude to constitute a

risk of electric shock to persons.

The exclamation point within an equilat-

eral triangle is intended to alert the user

to the presence of important operating

and maintenance (servicing) instructions

in the literature accompanying the appli-

ance.

The serial number of this product may be found on the bot-

tom of the unit.

You should note the serial number of this unit in the space

provided and retain this book as a permanent record of your

purchase to aid identification in the event of theft.

Model No. AW-E560

Serial No.

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO

NOT REMOVE COVER (OR BACK). NO USER SER-

VICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PER-

SONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

SA 1965

SA 1966

For U.S.A

For CANADA

-1-

CONTENTS

PREFACE ............................................................................................................................................................................................ 2

FEATURES .......................................................................................................................................................................................... 2

SPECIAL NOTES ON OPERATION .................................................................................................................................................... 3

PRECAUTIONS ................................................................................................................................................................................... 4

MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS ............................................................................................................ 6

LENS MOUNTING .............................................................................................................................................................................. 11

FLANGE BACK ADJUSTMENT .......................................................................................................................................................... 12

IRIS GAIN CONTROL IN A LENS ....................................................................................................................................................... 12

CONNECTIONS .................................................................................................................................................................................. 13

ADJUSTMENT .................................................................................................................................................................................... 25

OPERATION MODE SETTING ............................................................................................................................................................ 31

MENU ITEM SETTING ........................................................................................................................................................................ 33

INITIAL SET MENU SETTING ............................................................................................................................................................. 36

USER SETUP MENU SETTING ........................................................................................................................................................... 43

CAMERA INSTALLATION ................................................................................................................................................................... 48

CAMERA ID SETTING ........................................................................................................................................................................ 49

TIME DATE SETTING ......................................................................................................................................................................... 52

RANGE OF SETUP/INITIAL SET AND THEIR INITIAL VALUE ............................................................................................................ 54

RANGE OF SCENE FILE/USER SET AND THEIR INITIAL VALUE ..................................................................................................... 55

SPECIFICATIONS ............................................................................................................................................................................... 59

STANDARD ACCESSORIES ............................................................................................................................................................... 60

OPTIONAL ACCESSORIES ................................................................................................................................................................ 60

-2-

PREFACE

The Panasonic AW-E560 is a digital signal processing

color video camera that incorporates three 1/2” CCDs. A

digital video signal processing system is packed in a com-

pact, lightweight body while assuring high picture quality,

high reliability and high performance.

System setup and adjustments can be easily performed by

setup menu.

Connection to peripheral devices, such as an RCU and an

RCB, enables a wide variation of system configurations.

The lens and the camera pan/tilt unit can be remote con-

trolled when the camera is connected to an RCU with

optional multiplex adaptor WV-PS550.

Connection to an RCU for camera control and power sup-

ply can be simply done with a coaxial cable through an

optional adaptor.

FEATURES

1. Digital video signal processing for high quality, high

reliability, high performance, lightweight and compact

size.

2. Resolution: 800 lines (HIGH BAND DTL : ON), S/N

ratio: 62dB

3. Minimum illumination: 5 lux (F1.4, +18dB)

4. SET UP menu for system check and readjustments.

5. Built-in automatic controls, including ATW, ELC, and

AGC

6. CCD readout is switchable between field and frame

modes. Vertical resolution can be stepped up in

frame mode and it is effective for shooting still objects.

7. Any of R/G/B, Y/C, Y/PB/PR and composite can be

selected as an output signal.

8. Thanks to the built-in synchronized scanning system,

noiseless pictures are available from computer graph-

ics.

9. Various correction circuits permit video reproduction

with highest fidelity.

10. Chroma aperture correction enables clear shots of

dark color objects.

11. 2 Dimensional lowpass filter reduces spurious signals.

12. A dark detail circuit provides natural edge correction

to any object in a dark scene.

-3-

13. A digital highlight compression circuit reproduces nat-

ural dynamic ranges.

14. A digital color matrix enables high fidelity color

images.

15. The optimum operation mode for each of your specific

applications can be selected.

16. The scene file automatically sets up the most appro-

priate shooting conditions.

17. System setup parameters, such as SMPTE/full color

bar, date and time are indicated on the monitor

screen.

18. Remote control with an RCU or RCB.

SPECIAL NOTES ON OPERATION

• Turn power off before connecting or disconnecting

cables.

• Connection or disconnection of any studio cable, RCB

cable or other cable to any unit of equipment must be

performed while power is off.

• While the camera is automatic mode;

Shooting of bright objects in ELC operation mode may

result in a smeared picture unique to the CCD.

The ATW function under fluorescent illumination can

adversely change the white balance.

-4-

PRECAUTIONS

DONT'S

• Do not attempt to disassemble the camera, Remote

Control Unit (RCU) or other units. In order to prevent

electric shock, do not remove screws or covers.

There are no user-serviceable parts inside.

• Do not abuse the camera. Avoid striking, shaking,

etc. The camera contains sensitive components

which could be damaged by improper handling or

storage.

• Do not let the lens remain uncapped when the camera

is not in use. If the lens is not installed, do not leave

the lens mount hole uncovered.

• Do not touch the surface of the lens or prism with your

fingers.

• Do not use strong of abrasive detergents when clean-

ing the camera body.

DO'S

• Do refer any servicing to qualified service personnel.

• Do handle the camera with care.

• Do protect the precision made lens by placing the

lens cap over the lens when the camera is not in use.

If the lens is not installed, protect the surface of the

prism by placing the body cap into the lens mount

hole.

• Do use a mild blower or lens cleaning tissue designed

for coated lenses, to clean the surface of the lens or

prism in the event that it should become dirty.

• Do use a dry cloth to clean the camera if it is dirty. In

case the dirt is hard to remove, use mild detergent

and wipe gently.

-5-

• Do not aim the camera toward the sun, no matter

whether it is turned on or not.

• Do not expose the camera or Remote Control Unit

(RCU) to rain or moisture, and do not try to operate the

equipment in wet areas. Do not operate the camera or

RCU if it becomes wet.

• Do not operate the camera or Remote Control Unit

(RCU) outdoors during a lightning storm.

• Do not use the camera in an extreme environment

where high temperatures or high humidity exist.

• Do not leave the camera and Remote Control Unit

(RCU) turned on when not in use. Do not unnecessar-

ily turn the camera power on and off repeatedly. Do

not block the ventilation slots.

• Do use caution when operating the camera in the

vicinity of spot lights or other bright lights, as well as

light reflecting objects and surfaces.

• Do take immediate action if ever the camera or RCU

should become wet. Turn the power off and have the

unit checked by an authorized service facility.

• Do follow normal safety precautions to avoid personal

injury.

• Use the camera in an environment where the tempera-

ture is within 14°F - 113°F (−10°C - +45°C), and the

relative humidity is within 30% - 90%.

• Always turn the power off when the camera is not

going to be used. Operate the camera and Remote

Control Unit (RCU) only when there is adequate venti-

lation.

-6-

MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS

-7-

1. Lens Mount

1/2" standard bayonet type lens or a microscope

adaptor can be mounted.

2. Mounting Hole

A screw hole (1/4” - 20 UNC) for mounting the camera

on a wall, ceiling with a mounting bracket or tripod.

3. Page Switch (PAGE)

A menu will appear on the monitor screen when this

switch is pressed for around 2 seconds. Pressing the

switch advances the menu page.

4. Item Switch (ITEM/AWC)

Any of the items shown in the menu can be selected

with this switch. When the menu is not displayed or

the camera is in shooting mode, the automatic white

balance control can be set with this switch.

5. Up Switch (UP/ABC)

While the menu is displayed, any setting can be

brought up to a higher value with this switch. When

the menu is not displayed or the camera is in shooting

mode, the automatic black balance control can be set

with this switch.

6. Down Switch (DOWN/BAR)

While the menu is displayed any setting can be

brought down to a lower value with this switch. When

the menu is not displayed or the camera is in shooting

mode, the color bar and the shooting conditions are

alternately indicated by pressing the switch.

ZOOM/FOCUS

REMOTE

EXT DC IN

PAGE ITEM

(AWC) UP

(ABC) DOWN

(BAR) IRIS

SEE MANUAL

CAUTION

CONNECT TO SPECIFIED

CLASS 2 POWER SUPPLY

ONLY SEE MANUAL

VBS/HD

75 ¶VD

VIDEO/RGB

CONTROL

VIDEO OUTG/L IN

OFF

-8-

7. Video Output Connector (VIDEO OUT)

A composite video signal is provided at this connec-

tor.

8. Iris Connector (IRIS)

Input terminal for lens with an iris control function.

Some lenses may require an optional lens extension

cable for connection.

9. Zoom/Focus Connector (ZOOM/FOCUS)

Input terminal for lens with zoom and focus function

that can be remote controlled.

Pin No. Signal Pin No. Signal

1 Not Used 7 Iris F

2 Not Used 8 Auto/Remote Control

3 GND 9 Not Used

4 Auto/Manual Control 10 Not Used

5 Iris Control 11 Not Used

6 Lens P 12 Not Used

Iris Connector (IRIS)

Pin No. Signal Pin No. Signal

1 Not Used 7 Voltage Common

2 Not Used 8 Focus Control

3 GND 9 Zoom Control

4 Not Used 10 Not Used

5 Not Used 11 Lens +V

6 +12 V 12 Lens −V

Zoom/Focus Connector (ZOOM/FOCUS)

ytr

qiw

Other manuals for AWE560 - COLOR VIDEO CAMERA

Table of contents

Other Panasonic Security Camera manuals

Panasonic

Panasonic BB-HCM381A - Network Camera User manual

Panasonic

Panasonic CV-CFN203L User manual

Panasonic

Panasonic WV-CP310G User manual

Panasonic

Panasonic i-Pro WV-SF332 User manual

Panasonic

Panasonic GPMF622 - MACHINE VISION CAMER User manual

Panasonic

Panasonic WVBP70 - CCTV CAMERA User manual

Panasonic

Panasonic AW-HE145KP User manual

Panasonic

Panasonic WV-CW634S User manual

Panasonic

Panasonic Super Dynamic III WV-CP480 User manual

Panasonic

Panasonic WV-NF284 - i-Pro Network Camera User manual

Panasonic

Panasonic Super Dynamic II WV-CS854B User manual

Panasonic

Panasonic KX-HNC200 User manual

Panasonic

Panasonic WV-SP105 User manual

Panasonic

Panasonic WV-SFV781L User manual

Panasonic

Panasonic BL-C10 User manual

Panasonic

Panasonic WV-CP150 User manual

Panasonic

Panasonic GPMF502 - ICD CAMERA User manual

Panasonic

Panasonic WV-BP140 User manual

Panasonic

Panasonic Super Dynamic III WV-CS954 User manual

Panasonic

Panasonic WV-SW175 User manual

Panasonic

Panasonic WV-SFN480PJ User manual

Panasonic

Panasonic KX-HCM270 User manual

Panasonic

Panasonic GPMS112 - IND CCD CAMERA User manual

Panasonic

Panasonic WV-CF102E User manual

Popular Security Camera manuals by other brands

Okina USA

Okina USA SIR36-870VF650LP user manual

Divio

Divio NDR155PA user manual

Canon

Canon VB-C500D Specifications

Easy Access

Easy Access EasyGuard user manual

Vivotek

Vivotek FD9389-EHV-v2 Quick installation guide

TUYA

TUYA COSMO W2 manual

Eusso

Eusso UNC7500-IR Advanced installation guide

urmet domus

urmet domus 1096/204 user manual

VC VC20 series operating manual

Axis

Axis Q1614 installation guide

ieGeek

ieGeek DD201 manual

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Installation and user guide

Vicon

Vicon V662-D-1 Installation and operation guide

Grundig

Grundig GCH-K0274P owner's manual

Lorex

Lorex VANTAGE LBC7032 quick start guide

4xem

4xem WPT Specifications

Samsung

Samsung SCV-3082 Specifications

Vitek

Vitek VTC-C544 Specifications