Panasonic AKHC900 - COLOR CAMERA User manual

Panasonic Broadcast

AK-HC900

Menu Information

USER MENU

1.MAINTENANCE

2.SETTING

3.CAM ID

4.FILE MENU

MAINTENANCE

1.BLACK SHADING

2.PED,GAMMA,FLARE

3.KNEE,WHITE CLIP

4.R/B GAIN

5.DTL

6.GAIN,AUTO IRIS

7.S.GAIN 1

8.S.GAIN 2

9.S.GAIN 3

10.FRAME MODE

11.COLOR CORRECTION1

12.COLOR CORRECTION2

°°

SETTING

1.MODE

2.SHUTTER

3.H.PHASE

°° °°

°°

CAM ID

ID:AKHC900

°°

FILE MENU

FILE :USER1

(DATA REF :PRESET)

SAVE FILE? :USER1

SAVE :

°°

File managing & renewing menu

USER MENU

Maintenance menu

Using condition setting menu

Camera ID setting menu

Setting of Menu Items

_Configuration of menu display screen

USER MENU

1.MAINTENANCE

2.SETTING

3.CAM ID

4.FILE MENU

Setting of Menu Items

_USER menu (Initial screen)

The readout data at start of power supply is

the data just before cutting off the power

supply, and the operation is started with the

data.

1. MAINTENANCE

It sets various adjusting data.

2. SETTING

It sets various modes.

3. CAM ID

It sets the camera ID.

4. FILE MENU

It executes file loading and saving, and

makes the basic setting of data display.

Menu operation is executed by the HD Controller AK-HRP900.

MAINTENANCE

1.BLACK SHADING

2.PED,GAMMA,FLARE

3.KNEE,WHITE CLIP

4.R/B GAIN

5.DTL

6.GAIN,AUTO IRIS

7.S.GAIN 1

8.S.GAIN 2

9.S.GAIN 3

10.FRAME MODE

11.COLOR CORRECTION1

12.COLOR CORRECTION2

°°

°BLACK SHADING°

DETECTION

CORRECT(DIG) :ON

Setting of Menu Items

!Maintenance menu

≥Move the cursor (arrow mark) to the item

to be adjusted and press the MENU key,

then it enters the adjustment menu there-

under.

≥Move the cursor to MAINTENANCE and

press the MENU key, then it returns to

USER MENU.

1Black shading correction menu

≥When MENU key is pressed at DE-

TECTION, (BLK-SHD:ACTIVE) ap-

pears, then the lens is automatically

stopped down and ABB operation is

executed.

≥When CORRECT (DIG) is turned ON,

horizontal and vertical shading correc-

tion is automatically executed.

When it is turned OFF, the current value

is maintained.

≥Move the cursor to “BLACK SHADING”

and press the MENU key, then it re-

turns to MAINTENANCE MENU.

Note:

It takes about 90 sec. until completion of

black shading correction.

PED,GAMMA,FLARE

M PED :+027

R PED :+000

B PED :+000

M GAMMA :0.45

R GAMMA :+00

B GAMMA :+00

R FLARE :010

G FLARE :000

B FLARE :017

GAMMA :ON

FLARE :ON

°° °°

Setting of Menu Items

!Maintenance menu

2Pedestal, gamma, flare adjustment

M PED: Master pedestal can be adjusted

only by turning the control panel VR.

The R, G, B pedestal can be totally ad-

justed.

R, B PED: R, B pedestal adjustment.

Besides the master pedestal adjustment,

R, B pedestal can be independently ad-

justed. It is not related to DATA REF. The

numeral display after normal ending of

ABB is “0”for both of R, B.

M GAMMA: Master gamma adjustment.

The R, G, B gamma can be totally ad-

justed.

R, B GAMMA: R, B gamma adjustment.

Besides the master gamma adjustment,

R, B gamma can be independently ad-

justed.

R FLARE: R flare adjustment

G FLARE: G flare adjustment

B FLARE: B flare adjustment

GAMMA: Gamma ON/OFF setting

FLARE: Flare ON/OFF setting

KNEE,WHITE CLIP

M KNEE POINT :95.00%

R KNEE POINT :+00.00%

B KNEE POINT :+00.00%

M KNEE SLOPE :95.00%

R KNEE SLOPE :+000

B KNEE SLOPE :+000

A.KNEE POINT :95.00%

A.KNEE LVL :108

WHITE CLIP LVL :109%

KNEE :MANU

WHITE CLIP :ON

°° °°

Setting of Menu Items

!Maintenance menu

3Knee&white clip adjustment menu

M KNEE POINT: Master knee point ad-

justment.

G, B, R knee point can be totally adjusted.

R, B KNEE POINT: R, B knee point ad-

justment.

Besides the master knee point adjust-

ment, R, B knee point can be independ-

ently adjusted.

M KNEE SLOPE: Master knee slope ad-

justment.

G, B, R knee slope can be totally ad-

justed.

R, B KNEE SLOPE: R, B knee slope ad-

justment.

Besides the master knee slope adjust-

ment, R, B knee slope can be indepen-

dently adjusted.

A. KNEE POINT: Auto knee point setting.

Knee point in auto knee mode is set.

A. KNEE LVL: Auto knee level.

WHITE CLIP LVL: White clip level ad-

justment.

Video level with white clipped is set.

KNEE: KNEE mode (OFF/MANU/AUTO)

OFF: Knee function is turned OFF

MANU: Knee function is adjustable with

menu.

AUTO: Auto knee function is executed.

WHITE CLIP: White clip operation set-

ting.

With it ON, white clip is effective.

R/B GAIN

R GAIN :+000

B GAIN :+000

°° °°

DTL

DTL :ON

TOTAL DTL LVL :+00

H DTL LVL :11

CRISP :02

LVL DEPENDENT :2

PEEK FREQUENCY :10

KNEE APERTURE :ON

KNEE APA.LVL :10

SLIM DTL :OFF

DTL(+) :+00

DTL(-) :+00

DTL CLIP :0

DTL SOURCE :(B+G)/2

°° °°

Setting of Menu Items

!Maintenance menu

4Gain adjustment menu

The gain of R, B GAIN is adjusted.

The difference from the state of being

white-balanced can be adjusted.

≥The numeral value displayed after nor-

mal ending of AWB is “0”for both of R,

5Detail adjustment menu

DTL: Setting of valid/invalid of detail func-

tion.

TOTAL DTL LVL: Horizontal and verti-

cal detail level adjustment.

H DTL LVL: Horizontal DTL component

is adjusted independently of DTL ad-

justed by TOTAL DTL.

CRISP: It functions to eliminate slight

detail component and to reduce the noise

level.

LVL DEPENDENT: It suppresses the de-

tail of low brightness level. The bright-

ness level to be suppressed is adjusted

here.

PEAK FREQUENCY: It lifts up the detail

component, and selects the central fre-

quency.

KNEE APERTURE: It functions to em-

phasizes the detail component of the por-

tion with knee applied.

KNEE APA.LVL: It sets the degree of

knee aperture.

SLIM DTL: It validates the function of

slimming the portion where the detail is

thick and emphasized.

DTL

DTL :ON

TOTAL DTL LVL :+00

H DTL LVL :11

CRISP :02

LVL DEPENDENT :2

PEEK FREQUENCY :10

KNEE APERTURE :ON

KNEE APA.LVL :10

SLIM DTL :OFF

DTL(+) :+00

DTL(-) :+00

DTL CLIP :0

DTL SOURCE :(B+G)/2

°° °°

GAIN,AUTO IRIS

LOW GAIN :0dB

MID GAIN :9dB

HIGH GAIN :18dB

A.IRIS LVL :082

A.IRIS PEAK/AVG :075

A.IRIS WINDOW :NORM1

IRIS MODE :LENS

IRIS GAIN :06

°° °°

Setting of Menu Items

!Maintenance menu

5Detail adjustment menu (continued

from previous page)

DTL (i): Setting of DTL at the edge in

positive direction.

DTL (j): Setting of DTL at the edge in

negative direction.

DTL CLIP: Setting of clip level of DTL

edge.

DTL SOURCE: Setting of video source

[G, R, (3G+R) /4, (2G+R+B) /4, (G+B/2)]

to create the detail.

6Master gain, auto iris setting menu

LOW GAIN: LOW setting of master gain.

MID GAIN: MID setting of master gain.

HIGH GAIN: HIGH setting of master gain.

≥The above GAIN setting is able to set -

6 to + 18 dB in 3 dB step.

A.IRIS LVL: Setting of the intended con-

vergence level of auto iris.

A.IRIS PEAK/AVG: Setting of the detec-

tion ratio of peak value and average value

of the quantity of light when auto iris is

operated.

A.IRIS WINDOW: Setting of the detect-

ing position of auto iris.

IRIS MODE: Auto iris mode setting:

(LENS/CAM).

IRIS GAIN: Iris loop gain adjustment.

S GAIN 1

TOTAL GAIN :62dB

ANLG GAIN :36dB

PIX MIX :06dB

V MIX :OdB

FRAME MIX :20dB

H DTL LVL :00

CRISP :0

LEVEL DEPENDENT :5

PEAK FREQUENCY :2

M GAMMA :0.45

MASTER PED OFFSET :-043

R PED OFFSET :-046

B PED OFFSET :-045

°° °°

H FRAME MODE

1.SCAN REVERSE :OFF

°°

Setting of Menu Items

7Super gain, Detail, Pedestal-offset

level setting menu

TOTAL GAIN: Total gain in analog, pixel

addition, and memory addition is dis-

played.

ANLG GAIN: Gain setting in analog.

PIX MIX: Gain setting in horizontal pixel

addition. Capable of setting 0/6 dB.

V MIX: Gain setting in vertical pixel addi-

tion. Capable of setting 0/6 dB.

FRAME MIX: Gain setting in memory ad-

dition. Capable of setting 0/6/12/15/20

dB.

H DTL LVL: DTL level setting of super

gain.

CRISP: Setting the function of reducing

noise level of super gain. It is invalid

when DTL level is “0.”

LEVEL DEPENDENT: Setting of DTL

suppression at low lighting intensity of

super gain.

PEAK FREQUENCY: Setting of DTL

boost frequency of super gain.

M GAMMA: Gain setting in super gain.

Capable of setting 0/6 dB.

MASTER PED OFFSET: Setting of mas-

ter pedestal offset of super gain 1.

R PED OFFSET: Setting of R pedestal

offset of super gain.

B PED OFFSET: Setting of B pedestal

offset of super gain.

!Maintenance menu

8Setting menu in frame mode

SCAN REVERSE: Capable of changing

the right and left pictures, the top and bot-

tom pictures with each other, respectively.

(Super gain 1, 2, 3 are same menu.)

Setting of Menu Items

!Maintenance menu

9Color correction 1 menu

Adjustment of gain (saturation) and phase

of each color.

< COLOR CORRECTION1 >

SAT PHASE

R +00 +00

Mg +00 +00

B +00 +00

Cy +00 +00

G +00 +00

Y1 +00 +00

< COLOR CORRECTION2 >

SAT PHASE

R - Mg +00 +00

Mg - B +00 +00

B - Cy +00 +00

Cy - G +00 +00

G - Y1 +00 +00

Y1 - R +00 +00

qZ Color correction 2 menu

Adjustment of gain and phase of matrix.

Other manuals for AKHC900 - COLOR CAMERA

Table of contents

Other Panasonic Security Camera manuals

Panasonic

Panasonic AWHE60H User manual

Panasonic

Panasonic WVCP160 - COLOR CCTV CAMERA User manual

Panasonic

Panasonic WV-S2500 Series User manual

Panasonic

Panasonic WS-SW395 User manual

Panasonic

Panasonic WV-X6533LN Operating manual

Panasonic

Panasonic BL-C210 Series User manual

Panasonic

Panasonic BL-C210 Series User manual

Panasonic

Panasonic KX-HNB700 User manual

Panasonic

Panasonic GPUS522CUA - IND CCD CAMERA User manual

Panasonic

Panasonic AW-HE40HWP User manual

Panasonic

Panasonic KX-HCM10 User manual

Panasonic

Panasonic BB-HCM403A User manual

Panasonic

Panasonic KX-HNC800B User manual

Panasonic

Panasonic AW-HE40HWP User manual

Panasonic

Panasonic i-pro WV-NP1004 User manual

Panasonic

Panasonic AWE860 - COLOR CAMERA User manual

Panasonic

Panasonic GPMF622 - MACHINE VISION CAMER User manual

Panasonic

Panasonic AW-HN40HKPJ User manual

Panasonic

Panasonic KX-HCM280A Specification sheet

Panasonic

Panasonic KX-HCM270 User manual

Panasonic

Panasonic WV-SW559 User manual

Panasonic

Panasonic WV-CW594A User manual

Panasonic

Panasonic WVNS324 - NETWRK CLR DOME CAME User manual

Panasonic

Panasonic WV-X2551LN Installation guide

Popular Security Camera manuals by other brands

Okina USA

Okina USA SIR36-870VF650LP user manual

Divio

Divio NDR155PA user manual

Canon

Canon VB-C500D Specifications

Easy Access

Easy Access EasyGuard user manual

Vivotek

Vivotek FD9389-EHV-v2 Quick installation guide

TUYA

TUYA COSMO W2 manual

Eusso

Eusso UNC7500-IR Advanced installation guide

urmet domus

urmet domus 1096/204 user manual

VC VC20 series operating manual

Axis

Axis Q1614 installation guide

ieGeek

ieGeek DD201 manual

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Installation and user guide

Vicon

Vicon V662-D-1 Installation and operation guide

Grundig

Grundig GCH-K0274P owner's manual

Lorex

Lorex VANTAGE LBC7032 quick start guide

4xem

4xem WPT Specifications

Samsung

Samsung SCV-3082 Specifications

Vitek

Vitek VTC-C544 Specifications