Panasonic 2SA2009G User manual
Transistors
1
Publication date: April 2007 SJC00349AED
This product complies with the RoHS Directive (EU 2002/95/EC).
2SA2009G
Silicon PNP epitaxial planar type
For low-frequency high breakdown voltage amplification
■Features
•High collector-emitter voltage (Base open) VCEO
•Low noise voltage NV
•S-Mini type package, allowing downsizing and thinning of the
equipment and automatic insertion through the tape packing.
■Absolute Maximum Ratings Ta=25°C
Parameter Symbol Rating Unit
Collector-base voltage (Emitter open) VCBO −120 V
Collector-emitter voltage (Base open) VCEO −120 V
Emitter-base voltage (Collector open) VEBO −5V
Collector current IC−20 mA
Peak collector current ICP −50 mA
Collector power dissipation PC150 mW
Junction temperature Tj150 °C
Storage temperature Tstg −55 to +150 °C
Parameter Symbol Conditions Min Typ Max Unit
Collector-base voltage (Emitter open) VCBO IC=−10 µA, IE=0 −120 V
Collector-emitter voltage (Base open) VCEO IC=−1 mA, IB=0 −120 V
Emitter-base voltage (Collector open) VEBO IE=−10 µA, IC=0 −5V
Collector-base cutoff current (Emitter open)
ICBO VCB =−50 V, IE=0 −100 nA
Collector-emitter cutoff current (Base open)
ICEO VCE =−50 V, IB=0 −1µA
Forward current transfer ratio *hFE VCE = −5 V, IC= −2 mA 180 700
Collector-emitter saturation voltage VCE(sat) IC=−20 mA, IB=−2 mA −0.6 V
Transition frequency fTVCB =−5 V, IE=2 mA, f =200 MHz 200 MHz
Noise voltage NV VCE = −40 V, IC= −1 mA, GV= 80 dB 130 mV
Rg= 100 kΩ, Function = FLAT
■Electrical Characteristics Ta=25°C ±3°C
Note) 1. Measuring methods are based on JAPANESE INDUSTRIAL STANDARD JIS C 7030 measuring methods for transistors.
2. *: Rank classification
Rank R S T
hFE 180 to 360 260 to 520 360 to 700
■Package
•Code
SMini3-F2
•Marking Symbol: AR
•Pin Name
1. Base
2. Emitter
3. Collector
2SA2009G
2SJC00349AED
This product complies with the RoHS Directive (EU 2002/95/EC).
VCE(sat) IChFE ICCob VCB
PCTaICVCE ICVBE
016
0
40 12080
0
200
160
120
80
40
Collector power dissipation P
C
(mW)
Ambient temperature T
a
(°C)
0−1
2
−10−8−2−6−4
0
−60
−50
−40
−30
−20
−10
Ta=25°C
−250 µA
−200 µA
−150 µA
−100 µA
−50 µA
IB=−300 µA
Collector current IC(mA)
Collector-emitter voltage
V
CE
(V)
0−1.
4
−1.2−1.0−0.8−0.2 −0.6−0.4
0
−30
−25
−20
−15
−10
−5
V
CE
=−5 V
T
a
=85°C
−25°C
25°C
Base-emitter voltage V
BE
(V)
Collector current I
C
(mA)
−0.1 −1−10 −100
−0.01
− 0.1
−1I
C
/ I
B
=10
T
a
=85°C
25°C
−25°C
Collector-emitter saturation voltage V
CE(sat)
(V)
Collector current I
C
(mA)
−1−10 −10
0
0
500
400
450
350
300
250
200
150
100
50
V
CE
=−5 V
T
a
=85°C
25°C
−25°C
Forward current transfer ratio hFE
Collector current IC(mA)
−1−10 −10
0
0
10
8
6
4
2
f =1 MHz
T
a
=25°C
Collector-base voltage VCB (V)
Collector output capacitance
(Common base, input open circuited) C
ob
(pF)
This product complies with the RoHS Directive (EU 2002/95/EC).
SMini3-F2 Unit: mm
0.30 +0.05
−0.02
0.13 +0.05
−0.02
2.00 ±0.20
(0.89)
0.90 ±0.10
(0.65)(0.65)
1.30 ±0.10
1.25 ±0.10
2.10 ±0.10
0.425 ±0.050
(0.49)
0 to 0.10
(5°)
(5°)
3
12
Request for your special attention and precautions in using the technical information and
semiconductors described in this book
(1)If any of the products or technical information described in this book is to be exported or provided to non-residents, the laws and
regulations of the exporting country, especially, those with regard to security export control, must be observed.
(2)The technical information described in this book is intended only to show the main characteristics and application circuit examples
of the products, and no license is granted under any intellectual property right or other right owned by our company or any other
company. Therefore, no responsibility is assumed by our company as to the infringement upon any such right owned by any other
company which may arise as a result of the use of technical information described in this book.
(3)The products described in this book are intended to be used for standard applications or general electronic equipment (such as office
equipment, communications equipment, measuring instruments and household appliances).
Consult our sales staff in advance for information on the following applications:
–Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support
systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the prod-
ucts may directly jeopardize life or harm the human body.
–Any applications other than the standard applications intended.
(4)The products and product specifications described in this book are subject to change without notice for modification and/or im-
provement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product
Standards in advance to make sure that the latest specifications satisfy your requirements.
(5)When designing your equipment, comply with the range of absolute maximum rating and the guaranteed operating conditions
(operating power supply voltage and operating environment etc.). Especially, please be careful not to exceed the range of absolute
maximum rating on the transient state, such as power-on, power-off and mode-switching. Otherwise, we will not be liable for any
defect which may arise later in your equipment.
Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure
mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire
or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products.
(6)Comply with the instructions for use in order to prevent breakdown and characteristics change due to external factors (ESD, EOS,
thermal stress and mechanical stress) at the time of handling, mounting or at customer's process. When using products for which
damp-proof packing is required, satisfy the conditions, such as shelf life and the elapsed time since first opening the packages.
(7)This book may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita
Electric Industrial Co., Ltd.
Other Panasonic Computer Hardware manuals
Panasonic
Panasonic 2SA1309A User manual
Panasonic
Panasonic 2SC3311A User manual
Panasonic
Panasonic AJHDP2000 - 2K PROCESSOR User manual
Panasonic
Panasonic TY-FB11DD - Monitor Terminal Expansion Board User manual
Panasonic
Panasonic AW-HHD870N User manual
Panasonic
Panasonic FP-X User manual
Panasonic
Panasonic TY-FB7HD User manual
Panasonic
Panasonic 2SB0710A User manual
Panasonic
Panasonic WJ-MPU850 User manual
Panasonic
Panasonic UP0KG8DG User manual
Panasonic
Panasonic Future Electronics BULLSEYE User manual
Panasonic
Panasonic 2SA1738 User manual
Panasonic
Panasonic KXF-9R4C User manual
Panasonic
Panasonic 2SA2174J User manual
Panasonic
Panasonic WJ-MPU855 User manual
Panasonic
Panasonic FP2 Series User manual
Panasonic
Panasonic PAW-FC Manual
Panasonic
Panasonic 2SC2404 User manual
Panasonic
Panasonic MAS3795E User manual
Panasonic
Panasonic UP05C8GG User manual
Popular Computer Hardware manuals by other brands
EMC2
EMC2 VNX Series Hardware Information Guide
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 user manual
Gigabyte
Gigabyte B660M DS3H AX DDR4 user manual
Raidon
Raidon iT2300 Quick installation guide
National Instruments
National Instruments PXI-8186 user manual
Hauppauge
Hauppauge WinTV-HVR-2250 Quick installation guide
Galaxy
Galaxy GHDX2-2430S-24F4D Installation and hardware reference manual
Intel
Intel AXXRMFBU4 Quick installation user's guide
Kontron
Kontron DIMM-PC/MD product manual
ST
ST X-NUCLEO-SAFEA1B How to use
STEINWAY LYNGDORF
STEINWAY LYNGDORF SP-1 installation manual
Advantech
Advantech ASMB-935 Series user manual