Panasonic WVQ169 - CCTV CEILING MOUNT BRACKET User manual

Before attempting to connect or operate this product,

please read these instructions carefully and save this manual for future use.

Ceiling Mount Bracket

Instructions

Model No. WV-Q169

FRANÇAIS ENGLISH

All work related to the installation of this product should be made by qualified service

personal or system installer.

Use this apparatus for indoor use only.

Installation area

• Consult the dealer about the installation area to select a strong ceiling area. Make sure that

the installation area is strong enough to hold the total weight of the camera assembly

(approx. 2.2 kg{4.85 lbs}) before installation.

• The installation area shall have 210 mm {8-1/4"} or more space behind the ceiling.

• The thickness of the ceiling board for installation can range from 9 to 40 mm {3/8" to 1-

9/16"}.

210 mm {8-1/4"} or more

Ceiling board: from 9 to 40 mm {3/8" to 1-9/16"}

CONTENTS

Preface ....................................................................................................................................... 2

Precautions ................................................................................................................................ 2

Major Operating Controls and Their Functions .......................................................................... 4

Installations ................................................................................................................................ 4

Specifications ............................................................................................................................. 8

Standard Accessories ................................................................................................................ 8

Precautions

Preface

The WV-Q169 is a ceiling embedded bracket that is exclusively designed to mount the color

CCTV camera, WV-NW484S, on a ceiling. This bracket can be used for an area with weak pull-

out strength such as plasterboard in a double ceiling, and the embedded type makes the visi-

ble part of the camera smaller.

Avoid installing in the following locations.

• Locations where it may get wet from rain or water splash

• Locations where a chemical agent is used such as a swimming pool (not only outdoor)

• Locations subject to steam and oil smoke such as a kitchen

• Locations where radiation or x-ray emissions are produced

• Locations where it may be damaged by briny air such as seashores

• Locations where the temperature is not within –10 °C to +50 °C {14 °F to 122 °F}.

• Locations subject to vibrations (This product is not designed for on-vehicle use.)

• Locations where the temperature may rapidly change such as the peripheral areas of the

air outlets of air conditioners or doors facing outside. (In case of installing the camera in

such locations, the dome cover may become foggy or condensation may be caused on the

cover.)

Tightening the screws and bolts

• The screws and bolts must be tightened with an appropriate tightening torque according to

the material and strength of the installation area. After tightening the screws or bolts, per-

form visual check to ensure tightening is enough and there is no backlash.

• Required pull-out capacity of a single screw/bolt is 196 N {44.1 lbf} or more.

Do not rub the edges of metal parts with your hand.

Failure to obsere this may cause injury.

Be sure to remove this apparatus if it is not in use.

Be sure to install the safety wire.

Use the specified camera only.

Failure to observe this may cause a fall of an inappropriate camera resulting in injury or acci-

dents. Mount WV-NW484S on this bracket exclusively.

Periodic inspections shall be conducted.

Rust on the metal parts or screws may cause a fall of the product resulting in injury.

Consult the dealer for the inspections.

ENGLISH

Major Operating Controls and Their Functions

WV-NW484S

Roof space

Safety wire angle (Accessory)

Safety wire (Accessory)

* Read the Operating Instructions of

the camera as well.

Installations

Be sure to read "Precautions" on the page 2 before installation. The Operating Instructions of

the color CCTV camera, WV-NW484S, shall be read as well.

1. Put Template A (accessory) against the ceiling and make a hole.

qMake 4 holes of 12 mm {1/2"} in diameter.

wRemove the center part from the tem-

plate.

eMake a hole of 180 mm {7-1/16"} in diam-

eter.

The ceiling holes are shown

in the drawing at right. →

Ceiling face ø12 mm {1/2"}

(4 positions)

ø180 mm

{7-1/16"}

Template A

Roof space

2. Install two anchor bolts (locally procured: M10 recommended) into the concrete ceil-

ing.

qInstall an anchor bolt in the

center of the hole made in the

step 1.

wDetermine the anchor bolt

length by use of Template B

(accessory).

eUse Template B (accessory) to

decide the nut position, and fix

it.

(Mount the nut so that the dis-

tance between the bottom sur-

faces of the nut and ceiling is

adjusted to 134 mm {5-1/4"}.)

Note: If there is already an anchor bolt installed, the anchor bolt can be used as a 2nd anchor

bolt. Make sure that the distance between the 1st and 2nd anchor bolts is 1 000 mm {3.28'}

or less before use.

3. Mount the safety wire angle (accessory) on the 2nd anchor bolt and connect the safe-

ty wire (accessory) to the angle.

qDisconnect the safety wire from the safe-

ty wire angle.

wEngage the face marked qwith the

anchor bolt.

eBend the face marked w.

rConnect the safety wire to the safety wire

angle again.

Note: To use the anchor bolt that was already installed, the use of 2 spacer nuts (locally pro-

cured) is helpful.

Anchor bolt

Nut (locally procured)

Template B

Determine the anchor

bolt length

Ceiling board Install the anchor bolt in the center

of the hole

134 mm

{5-1/4"}

Upper side

Lower

side

Safety wire

wInsert

qDisconnect

eBend

Mark w

Mark q

rConnect

Safety wire angle

Anchor bolt

Spacer nuts

(locally procured)

Safety wire

Spacer nuts

Safety wire angle

Existing anchor bolt

2nd Anchor bolt

(locally procured) 1st Anchor bolt (locally procured)

Important: When securing this bracket

on the ceiling, make sure that the

four ceiling board fixing brackets are

open as shown in the following fig-

ure.

7. Use double nuts (locally procured) to

secure the mount bracket after insert-

ing the 1st anchor bolt.

8. Use the driver bit supplied with the

camera to remove the screws that

secure the camera enclosure and

remove the enclosure from the camera

main body.

Important: Refer to the Operating Inst-

ructions of the camera as well.

9. Perform camera wiring.

4. Connect this mount bracket to the tip

of the safety wire.

5. Insert the 1st anchor bolt into the

mounting hole of the mount bracket.

6. Secure the mount bracket to the ceil-

ing board with the ceiling board fixing

screws (4 positions).

Turning the ceiling board fixing screws

clockwise provides ceiling board tighten-

ing between the bottom of the mount

bracket and ceiling board fixing bracket

resulting in mount bracket securing.

(Recommended tightening torque:

0.78N·m {0.58 lbf·ft})

Safety wire (Accessory)

Roof space

Insert the mount

bracket into the hole

Mount bracket

Mounting hole

1st anchor bolt

Ceiling

board fixing

screw

Ceiling board

fixing bracket

Turn clockwise

Double nuts (locally

procured)

Ceiling board

10. Align the screw holes of the mount

bracket with the 4 mounting screws of

the camera main body and tighten

them.

(Recommended tightening torque:

0.78 N·m {0.58 lbf·ft})

Note: The mount bracket supplied with

the camera is not used.

11. Mount the camera enclosure on the

camera main body.

Hooks for the

decorative

cover

Projection

12. Mount the decorative cover on this

mount bracket.

• Mount the decorative cover on the cam-

era mounting plate with engaging the

projections of the decorative cover with

the hooks for the decorative cover.

• Turn the decorative cover clockwise until

the cover clicks while pressing the cover

upward to lock the cover.

Screws of the main camera body

Ceiling mount

bracket

Screw

holes

Specifications

Ambient temperature –10 °C to +50 °C {14 °F to 122 °F}

Dimensions 204.4 {8-1/16} mm in diameter x 143.4 {5-5/8} mm in height

Weight Approx. 705 g{1.55 lbs}

Finish Main body: Metal

Decorative cover: ABS resin with light silver coating

Standard Accessories

Instructions (this book) .................................. 1 pc.

The following are for installation.

Safety wire ..................................................... 1 pc.

Safety wire angle ........................................... 1 pc.

Template A .................................................... 1 pc.

Template B .................................................... 1 pc.

Decorative cover ........................................... 1 pc.

Tous les travaux d’installation pour ce produit doivent être réalisés par des techniciens

qualifiés ou des installateurs de système confirmés.

Cet appareil est essentiellement conçu pour un usage sous abri.

Secteur d'installation

• Consulter le distributeur à propos de la surface d'installation afin de choisir une surface

d'installation au plafond suffisamment robuste. Il convient de s'assurer que la surface

d'installation est suffisamment robuste pour supporter le poids total de l'ensemble de

caméra vidéo (approximativement 2,2 kg{4,85 lbs}) avant l'installation.

• La surface d'installation doit pouvoir aménager 210 mm {8-1/4 po} ou davantage d'espace

derrière le plafond.

• L'épaisseur de panneau de plafond sélectionné pour faire l'installation peut se situer dans

les limites de 9 à 40 mm {3/8 po à 1-9/16 po}.

210 mm {8-1/4 po} ou

davantage

Panneau de plafond: De 9 à40 mm {3/8 po à1-9/16 po}

TABLE DES MATIÈRES

Préface ......................................................................................................................................... 9

Mesures de précaution ................................................................................................................. 9

Principaux organes de commande et fonctions ......................................................................... 11

Installations ................................................................................................................................ 11

Caractéristiques techniques ....................................................................................................... 15

Accessoires standard ................................................................................................................. 15

Mesures de précaution

Préface

Le modèle WV-Q169 est une platine de fixation encastrée en plafond exclusivement conçu

pour l'installation de la caméra vidéo couleur CCTV, WV-NW484S, au plafond. Cette platine de

fixation peut être utilisée pour une installation sur une surface possédant une faible résistance

à la traction telle qu'une plaque de plâtre dans un double plafond tandis que ce type encastré

offre l'avantage de rendre la partie visible de la caméra vidéo plus petite.

FRANÇAIS

Éviter toute installation dans les emplacements suivants.

• Emplacements risquant d'être humides par la pluie ou des éclaboussures d'eau

• Emplacements où des agents chimiques sont utilisés comme dans le cas d'une piscine

(mais non limité à l'extérieur)

• Emplacements exposés à de la vapeur ou des émanations d'huile comme dans le cas

d'une cuisine

• Emplacements où il existe des radiations ou une émission de rayons X

• Emplacements où l'équipement risque d'être endommagé par de l'air salin comme au bord

de la mer

• Emplacements où la température ne se trouve pas dans les limites de –10 °C à +50 °C {14

°F to 122 °F}.

• Emplacements soumis à des vibrations (Cet appareil n'a pas été conçu pour être utilisé

dans un véhicule.)

• Emplacements où la température risque de changer rapidement comme cela se produit

dans les zones environnant les prises de refoulement d'air des climatiseurs ou des portes

dirigées vers l'extérieur. (Si toutefois la caméra vidéo est installée à ces emplacements, le

couvercle en dôme risque de s'embuer ou de la condensation peut se former sur le

couvercle.)

Serrage des vis de fixation et des boulons

• Les vis de fixation et les boulons d'installation doivent être serrés au couple de serrage

approprié en fonction des matériaux et de la résistance de la surface appelée à accueillir

la caméra vidéo. Une fois le serrage des vis de fixation ou des boulons terminé, procéder à

un examen visuel afin de s'assurer que le serrage est suffisant et qu'il n'y a pas de jeu.

• La force de traction d'une seule vis de fixation ou d'un seul boulon est de 196 N {44,1 lbf}

ou davantage.

Ne jamais frotter le bord des parties métalliques à mains nues.

Le fait de ne pas respecter cette précaution risque d'aboutir à des blessures.

Ne pas oublier de retirer cet appareil lorsqu'il n'est pas utilisé.

Ne pas oublier d'installer le câble de sécurité.

Se servir essentiellement de la caméra vidéo.

Le fait de ne pas observer ceci risque de provoquer une chute d'une caméra vidéo inadaptée

et par voie de conséquence de blesser quelqu'un voire engendrer des accidents. Installer le

modèle WV-NW484S exclusivement sur cette platine de fixation.

Des inspections périodiques doivent être effectuées.

Une formation de rouille sur les parties métalliques ou sur les vis de fixation peut engendrer

une chute de l'appareil et ceci peut entraîner des blessures.

Se mettre en rapport avec le distributeur en ce qui concerne les inspections à faire.

Table of contents

Languages:

Other Panasonic Camera Accessories manuals

Panasonic

Panasonic DMW-YAGHPP User manual

Panasonic

Panasonic KX-TGA20AZ User manual

Panasonic

Panasonic WV-CS4SA User manual

Panasonic

Panasonic AJHVF27P User manual

Panasonic

Panasonic CF-VZSU53AW User manual

Panasonic

Panasonic ML614 User manual

Panasonic

Panasonic CGR18650AF User manual

Panasonic

Panasonic Varicam AU-VCVF20G User manual

Panasonic

Panasonic DP-100 series User manual

Panasonic

Panasonic UP-RW1245P1 User manual

Panasonic

Panasonic Videolarm POD9CW User manual

Panasonic

Panasonic AWPH360N - PAN/TILT HEAD User manual

Panasonic

Panasonic AJHVF21G - HD EVF - MULTI-LANG User manual

Panasonic

Panasonic DMW-DCC10 User manual

Panasonic

Panasonic AJ-CVF50G User manual

Panasonic

Panasonic WV-NS202 - i-Pro Network Camera User manual

Panasonic

Panasonic LC-XC1228AP User manual

Panasonic

Panasonic POD7C User manual

Panasonic

Panasonic AJ-CA900P User manual

Panasonic

Panasonic H-NS043 User manual

Panasonic

Panasonic WV-Q100A User manual

Panasonic

Panasonic AWPH405N - PAN/TILT CAMERA User manual

Panasonic

Panasonic AG-CVF10G User manual

Panasonic

Panasonic WV-Q117 User manual

Popular Camera Accessories manuals by other brands

Viltrox

Viltrox EF-NEX Mount instructions

Calumet

Calumet 7100 Series CK7114 operating instructions

Ropox

Ropox 4Single Series User manual and installation instructions

Cambo

Cambo Wide DS Digital Series Main operating instructions

Samsung

Samsung SHG-120 Specification sheet

Ryobi

Ryobi BPL-1820 Owner's operating manual

Aegis

Aegis ABL-36020P user manual

Pentax

Pentax Data Back Fc operating manual

Fantasea

Fantasea EyeGrabber F Series instruction manual

Honeywell

Honeywell HDZ20HD user manual

EGO

EGO BA1400T Operator's manual

Sima

Sima SRW-62 user guide

Shape

Shape A7SSMKIT Assembly manual

Slide Kamera

Slide Kamera HST-2 user manual

Power works

Power works 2902613 Original instructions

SES

SES SE-2047-2 user manual

Olympus

Olympus PT-EP05L instruction manual

Starlite

Starlite OctoDome nxt instructions