Panasonic WJ-MPU855 User manual

-1-

Before attempting to connect or operate this product,

please read these instructions carefully and save this manual for future use.

Central Processing Unit

Model No. WJ-MPU855

The serial number of this product may be found on the rear of

the unit.

You should note the serial number of this unit in the space

provided and retain this book as a permanent record of your

purchase to aid identification in the event of theft.

Model No.

Serial No.

WARNING:

To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.

The lightning flash with arrowhead sym-

bol, within an equilateral triangle, is

intended to alert the user to the pres-

ence of uninsulated "dangerous voltage"

within the product's enclosure that may

be of sufficient magnitude to constitute a

risk of electric shock to persons.

The exclamation point within an equilat-

eral triangle is intended to alert the user

to the presence of important operating

and maintenance (servicing) instructions

in the literature accompanying the appli-

ance.

CAUTION: TOREDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

SA 1965

SA 1966

NOTE: This equipment has been tested and found to comply

with the limits for a Class A digital device, pursuant to Part 15

of the FCC Rules. These limits are designed to provide rea-

sonable protection against harmful interference when the

equipment is operated in a commercial environment. This

equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio

communications.

Operation of this equipment in a residential area is likely to

cause harmful interference in which case the user will be

required to correct the interference at his own expense.

FCC Caution: To assure continued compliance, (example -

use only shielded interface cables when connecting to com-

puter or peripheral devices). Any changes or modifications

not expressly approved by the party responsible for compli-

ance could void the user’s authority to operate this equip-

ment.

For U.S.A

■Preface

The WJ-MPU855 CPU is the Central Processing Unit for the System 850 Matrix Switcher. The System 850 Matrix Switcher is

a CCTV surveillance system having multiple video inputs, multiple video outputs, and multiple control stations. The WJ-

MPU855 is capable of controlling a maximum of 1 024 video input sources and a maximum of 256 video outputs, such as

monitors, with 64 system controllers.

The WJ-MPU855 is a high-performance Intel X86 processor based computer running the OS-9 real time operating system

allowing you to build up a redundant system of duplicate CPUs.

-2-

■Appearance

qOperate Indicator (OPERATE)

Is on when the power of the WJ-MPU855 CPU is

turned on.

Note: The power switch of the CPU is located

underneath the front panel.

Remove the front panel by removing two

screws on the panel.

wReset Button (RESET)

The RESET button is recessed inside the front panel

hole to the right of the OPERATE indicator.

Press this button when the CPU rejects control from

outboard equipment.

eFan Alarm Indicator (FAN ALARM)

Indicates the cooling fan status.

This LED lights when a temperature rise in the CPU

is detected. Turn the power off and refer servicing

to qualified service personnel.

rHDD (Hard Disk Drive) Indicator (HDD)

Indicates the hard disk drive status.

tActive Indicator (ACTIVE)

Indicates the system status of the CPU.

yEthernet Ports (ETHERNET)

Exchange control data via Ethernet.

• SYSTEM CONTROLLER

This port is provided for controlling the 850 System

with the WV-CU850 system controllers. Up to 64

controllers can be connected to this port through a

hub.

Note: The total number of system controllers con-

nected via RS-485 and Ethernet is limited to 64.

OPERATE

RESET

FAN ALARM

HDD

ACTIVE

Central Processing Unit WJ–MPU

855

●Front View

• CAMERA/CROSS POINT/OSD

This port is used to exchange control data between

the cages through a hub.

• OTHER

Reserved for future use.

uController Ports [SYSTEM CONTROLLER (RS-

485)]

These ports are provided for controlling the 850

System with the WV-CU350 system controllers. Up

to 12 controllers can be connected

iPeripheral Interface Ports [PERIPHERAL

INTERFACE (RS-232C)]

These ports are reserved for future use or factory

tests.

oRedundant CPU selector (REDUNDANT CPU)

Selects either a redundant system or a standalone

system.

The factory default setting is NO.

!0 Mode Selector (SATELLITE MODE)

Always keep in STANDALONE position.

!1 Parallel Port (PARALLEL)

This port is used to connect to the WJ-MPS855 CPU

Switch Unit for a redundant system.

!2 Cooling Fan Unit

Prevents the temperature of the CPU from rising.

Do not block the ventilation opening on the cover.

!3 Fuse Holder

!4 AC Inlet Socket (AC IN)

Plug the power cord (supplied as a standard

accessory) into this socket and connect it to an AC

outlet.

PARALLEL

REDUNDANT

CPU RSATELLITE

MODE

ETHERNET

OTHER

CAMERA

CROSS POINT

OSD

GYGTEM

CONTROLLER

DATA 12 DATA 11 DATA 10 DATA 9 DATA 8 DATA 7 DATA 6 DATA 5 DATA 4 DATA 3 DATA 2 DATA 1

PERIFERAL INTERFACE (RS–232C)

(RS–485)

SYSYTEM

CONTROLLER

SATELLITE

STANDALONE

YESNO

AC IN

Central Processing Unit

125V 3.0A

SIGNAL

GND

y u

o!0 !1

●Rear View

-2-

■Mounting into the Rack

1. Remove the four rubber feet by removing four screws from the bottom of the CPU.

2. Install the CPU in the rack securing it with four screws (not included).

Control Processing Unit WJ-MPU

855

Rack mounting screws

Cautions:

• The cooling fans inside the CPU are subject to wear and need to be replaced periodically.

• Do not block the ventilation opening or slots on the cover to prevent the appliance from overheating.

Always keep the temperature in the rack within 50°C (122°F).

• Secure the rear of the appliance to the rack by using the additional mounting brackets (procured locally) if the rack is

subject to vibration.

NM1199-0 YWV8QA5295AN Printed in Japan

N19

Panasonic Canada Inc.

5770 Ambler Drive, Mississauga,

Ontario, L4W 2T3 Canada (905)624-5010

Panasonic Sales Company

Division of Matsushita Electric of Puerto Rico Inc.

Ave. 65 de Infanteria. Km. 9.5

San Gabriel Industrial Park, Carolina,

Puerto Rico 00985 (809)750-4300

Panasonic Security and Digital Imaging Company

A Division of Matsushita Electric Corporation of America

Executive Office: One Panasonic Way 3E-7, Secaucus, New Jersey 07094

Regional Offices:

Northeast: One Panasonic Way, Secaucus, NJ 07094 (201) 348-7303

Southern: 1225 Northbrook Parkway, Suite 1-160, Suwanee, GA 30024 (770) 338-6838

Midwest: 1707 North Randall Road, Elgin, IL 60123 (847) 468-5211

Western: 6550 Katella Ave., Cypress, CA 90630 (714) 373-7840

■Specifications

Power Supply: 120 V AC 60 Hz

Power Consumption: 90 W

Controllable Cameras: 1 024 cameras (8 card cages)

Cross Point Controllable Cages: 1 024 x 256 (32 card cages)

Controllable Monitors: 256 (2 card cages)

System Controller Ports:

Ethernet; 10Base-T, 8-conductor modular jack (x1)

Maximum 64 controllers(*)

RS-485; 6-conductor modular jack (x12)

Maximum 12 controllers(*)

Ethernet Ports: 10Base-T, 8-conductor modular jack for card cage control (1 port)

Other (1 port)

RS-232C Port: 9-pin D-sub connector (x3)

Ambient Operating Temperature: –10°C - +50°C (14°F - 122°F)

Ambient Operating Humidity: Less than 90%

Dimensions: 430 (W) x 132 (H) x 350 (D) mm

16-15/16” (W) x 5-3/16” (H) x 13-3/4” (D)

Weight: 16 kg(35 lbs)

(*) The total number of system controllers connected via RS-485 and Ethernet is limited to 64.

Weight and dimensions indicated are approximate.

Specifications are subject to change without notice.

■Accessory

Power Cord .............................................. 1 pc.

CD-ROM ................................................... 1 pc.

Table of contents

Other Panasonic Camera Accessories manuals

Panasonic

Panasonic LJ-SK56A User manual

Panasonic

Panasonic DMW-LVF1 User manual

Panasonic

Panasonic Lumix H-FS014045 User manual

Panasonic

Panasonic AWPH405N - PAN/TILT CAMERA User manual

Panasonic

Panasonic DMW-DCC5 User manual

Panasonic

Panasonic WVPS11B - CAMERA DRIVE UNIT User manual

Panasonic

Panasonic AGVF5P - 1.5" B&W VIEWFINDER User manual

Panasonic

Panasonic LUMIX DMW-BGGH5E User manual

Panasonic

Panasonic AWPH300 - INDOOR PAN/TILT HEAD User manual

Panasonic

Panasonic AK-HVF931AEA User manual

Panasonic

Panasonic AK-UHD12G User manual

Panasonic

Panasonic Lumix H-HS12035 User manual

Panasonic

Panasonic Videolarm POD9CW User manual

Panasonic

Panasonic DMWVF1 User manual

Panasonic

Panasonic VARICAM AU-VCVF2G User manual

Panasonic

Panasonic WV-Q108AE User manual

Panasonic

Panasonic VARICAM LT User manual

Panasonic

Panasonic WV-Q157 User manual

Panasonic

Panasonic H-FS45150 User manual

Panasonic

Panasonic DMW-DCC14 User manual

Panasonic

Panasonic AG-CVF10G User manual

Panasonic

Panasonic DP-100 series User manual

Panasonic

Panasonic CGR18650CG User manual

Panasonic

Panasonic WJMS488 - QUAD UNIT User manual

Popular Camera Accessories manuals by other brands

Viltrox

Viltrox EF-NEX Mount instructions

Calumet

Calumet 7100 Series CK7114 operating instructions

Ropox

Ropox 4Single Series User manual and installation instructions

Cambo

Cambo Wide DS Digital Series Main operating instructions

Samsung

Samsung SHG-120 Specification sheet

Ryobi

Ryobi BPL-1820 Owner's operating manual

Aegis

Aegis ABL-36020P user manual

Pentax

Pentax Data Back Fc operating manual

Fantasea

Fantasea EyeGrabber F Series instruction manual

Honeywell

Honeywell HDZ20HD user manual

EGO

EGO BA1400T Operator's manual

Sima

Sima SRW-62 user guide

Shape

Shape A7SSMKIT Assembly manual

Slide Kamera

Slide Kamera HST-2 user manual

Power works

Power works 2902613 Original instructions

SES

SES SE-2047-2 user manual

Olympus

Olympus PT-EP05L instruction manual

Starlite

Starlite OctoDome nxt instructions