Pablo UMA User manual
UMA
SETUP GUIDE & OWNERS MANUAL
INFO@PABLODESIGNS.COM
888 MARIN STREET
SAN FRANCISCO, CA
94124
PABLODESIGNS.COM
UMA INDICATOR OVERVIEW
UMA
POWER INPUT POWER BUTTON/
POWER INDICATOR LIGHT
BLUETOOTH BUTTON/
INDICATOR LIGHT
AUX INPUT
INDICATOR LIGHT FUNCTIONS:
pg. 02
POWER INDICATOR LIGHT
BLUETOOTH INDICATOR LIGHT
ILLUMINATED WHITE
BREATHING WHITE
ILLUMINATED GREEN
BREATHING RED
ILLUMINATED BLUE
BREATHING BLUE
NOT ILLUMINATED
RUNNING ON BATTERY POWER
PLUGGED IN AND CHARGING
PLUGGED IN, FULLY CHARGED
LESS THAN 15% BATTERY REMAINING
WAITING FOR CONNECTION
PAIRING MODE ACTIVATED
ACTIVE CONNECTION
UMA
CHARGING UMA
UMA USES AN INTERNAL RECHARGEABLE LITHIUM
POLYMER BATTERY THAT WILL LAST THE LIFETIME OF
THE DEVICE. FULLY CHARGE UMA’S BATTERY PRIOR
TO FIRST USE. TO CHARGE THE BATTERY, CONNECT
UMA TO THE INCLUDED POWER SUPPLY AND KEEP IT
CONNECTED TO THE POWER SOURCE UNTIL POWER
INDICATOR LIGHT TURNS GREEN. IT MAY TAKE UP TO
3.5 HOURS TO FULLY CHARGE UMA.
A B CD
PLUG TYPES:
PLUG
RELEASE
BUTTON
1. ‘CLICK’ PLUG INTO POWER SUPPLY
2. TO REMOVE PLUG, PUSH RELEASE
BUTTON AND SLIDE PLUG OUT
A. N AMERICA B. UK C. EU D. AU
NOTE: CONTACT MANUFACTURER FOR
ADDITIONAL PLUG TYPE REQUIREMENTS.
pg. 03
UMA
UMA LIGHT FUNCTION
PRESS POWER SWITCH BRIEFLY TO TURN UMA ON.
POWER INDICATOR LIGHT WILL ILLUMINATE. TURN
LIGHT CONTROL RING CLOCKWISE PAST “CLICK” TO
TURN ON LIGHT. ROTATE LIGHT CONTROL RING TO
ACTIVATE FULL RANGE DIM CONTROL.
CONTROLS
- ROTATE CLOCKWISE TO INCREASE LIGHT
- ROTATE COUNTER CLOCKWISE TO DECREASE LIGHT
- PHYSICAL ‘CLICK’ REGISTRATION INDICATES LIGHT IS OFF
OFF POSITION FULL BRIGHTNESS
pg. 04
UMA
CONTROLS
- TOUCH INTERFACE
- REQUIRES 360 DEGREES OF TOUCH ROTATION TO TRAVEL
FROM 0%-100% VOLUME
- SLIDE FINGER CLOCKWISE TO INCREASE VOLUME
- SLIDE FINGER COUNTER CLOCKWISE TO DECREASE VOLUME
- VOLUME IS CONTROLLED BY DIRECTION AND DISTANCE OF
SLIDE REGARDLESS OF POSITION
UMA VOLUME FUNCTION
VOLUME IS CONTROLLED THROUGH A TOUCH
CAPACITIVE PAD ON THE TOP OF UMA. USING YOUR
FINGER, SLIDE CLOCKWISE TO TURN VOLUME UP,
SLIDE ANTI CLOCKWISE TO TURN VOLUME DOWN.
pg. 05
UMA
BLUETOOTH BUTTON/
INDICATOR LIGHT
pg. 06
CONNECTING UMA TO A BLUETOOTH® WIRELESS TECHNOLOGY
ENABLED DEVICE
PAIRING:
WHEN CONNECTING A BLUETOOTH DEVICE TO UMA FOR THE FIRST
TIME, THE DEVICE MUST BE REGISTERED TO UMA. THIS IS CALLED
PAIRING. ONCE PAIRING IS COMPLETED, UMA WILL REMEMBER YOUR
DEVICE AND CONNECT AUTOMATICALLY. UMA CAN REMEMBER UP TO
8 DEVICES. TO PAIR YOUR DEVICE WITH UMA, FOLLOW THESE STEPS:
1. PRESS POWER SWITCH BRIEFLY TO TURN UMA ON. POWER
INDICATOR LIGHT WILL ILLUMINATE.
2. PRESS AND HOLD THE BLUETOOTH PAIRING BUTTON ON UMA FOR
ONE SECOND TO PUT UMA INTO PAIRING MODE, INDICATED BY A
BREATHING BLUE LIGHT. UMA WILL REMAIN IN PAIRING MODE
UNTIL A CONNECTION IS MADE, OR FOR UP TO ONE MINUTE.
3. TURN ON THE BLUETOOTH FUNCTION ON YOUR DEVICE.
4. IN THE BLUETOOTH SETTINGS OF THE DEVICE, SELECT “UMA
SOUND LANTERN” FROM THE LIST OF AVAILABLE CONNECTIONS.
5. BLUETOOTH INDICATOR LIGHT ON UMA WILL CHANGE TO SOLID
BLUE WHEN THE CONNECTION IS SUCCESSFUL. AFTER 10
SECONDS OF CONNECTION, INDICATOR LIGHT WILL TURN OFF.
6. PLAY MUSIC ON YOUR DEVICE. ENSURE VOLUME ON YOUR DEVICE
IS NOT SET TO MUTE.
7. AFTER YOUR DEVICE HAS PAIRED WITH UMA, IT WILL CONNECT
AUTOMATICALLY. IF IT DOES NOT CONNECT AUTOMATICALLY,
REPEAT THE PAIRING PROCESS TO REGISTER YOUR DEVICE.
IF YOU HAVE DIFFICULTY CONNECTING TO UMA, PLEASE REFER TO
THE TROUBLESHOOTING GUIDE IN THIS INSTRUCTION MANUAL.
UMA
pg. 07
CONNECTING UMA TO A DEVICE VIA PROVIDED AUXILLIARY CABLE
UMA CAN PLAY MUSIC FROM AN AUDIO DEVICE BY CONNECTING THE
INCLUDED AUX-IN CABLE. TO CONNECT YOUR DEVICE TO UMA WITH
AUXILLIARY CABLE, FOLLOW THESE STEPS:
1. PRESS POWER SWITCH BRIEFLY TO TURN UMA ON. POWER
INDICATOR LIGHT WILL ILLUMINATE.
2. PLUG AUXILLIARY CABLE INTO UMA AUDIO-IN PORT. BLUETOOTH
WIRELESS TECHNOLOGY WILL BE DISABLED AND ALL WIRELESS
CONNECTIONS WILL BE DISCONNECTED.
3. PLUG THE OTHER END OF THE AUXILLIARY CABLE INTO THE
AUDIO-OUT (HEADPHONE) PORT ON YOUR DEVICE.
4. PLAY MUSIC ON YOUR DEVICE. ENSURE VOLUME ON YOUR DEVICE
IS NOT MUTED.
NOTE: AUXILLIARY CABLE IS NON-DIRECTIONAL.
UMA
SURFACE MOUNT OPTION
UMA CAN BE BOLTED TO A SURFACE
USING THE PROVIDED SCREW.
TO SECURE UMA TO A SURFACE:
CONTACT MANUFACTURER FOR BOLT
DRILL A 5/16TH INCH (8 MM) HOLE
THROUGH SURFACE OF TABLE
ADD LOCK WASHER AND THREAD NUTS
ONTO BOLT FROM BELOW. TIGHTEN
UNTIL SECURE; DO NOT OVERTIGHTEN.
MAX TABLE
THICKNESS
1.25 INCHES
(32 MM)
THREAD SHORT END OF PROVIDED
BOLT INTO THREADED HOLE ON
UMA BASE UNTIL FLANGE IS FLUSH.
DO NOT OVERTIGHTEN
INSTALL LONG END OF PROVIDED
BOLT THROUGH TABLE
pg. 08
UMA
REMOVING AND REPLACING LEATHER STRAP
UMA SHIPS WITH A TAN AND A GREY STRAP. THESE STRAPS ARE MEANT TO BE REMOVEABLE FOR
CUSTOMIZABILITY AND AS A REPLACEMENT WHEN THE FIRST WEARS OUT. DO NOT REMOVE AND
REPLACE STRAPS FREQUENTLY AS THE SNAP FEATURES WILL BECOME WEAKER WITH FREQUENT USE.
TO REMOVE STRAP
-GRASP THE STRAP NEAR THE POINT OF CONNECTION TO THE LANTERN BODY.
-PULL STRAIGHT OUT FROM THE LANTERN UNTIL SNAP RELEASES.
-REPEAT ON THE OTHER SIDE
TO INSTALL NEW STRAP
-PRESS MALE SNAP CONNECTOR INTO FEMALE SNAP
UNTIL AN AUDIBLE ‘CLICK’ IS HEARD,
-REPEAT ON THE OTHER SIDE.
pg. 09
Other manuals for UMA
1
Table of contents
