oticon miniRITE Alta2 User manual
BTE
Alta2
Nera2
Ria2
Alta
Nera
Ria
Instructions for use
Model overview
This booklet is valid for Oticon BTE in the following hearing aid families
and models:
Alta2 Pro Nera2 Pro Ria2 Pro
Alta2 Nera2 Ria2
Alta Pro Nera Pro Ria Pro
Alta Nera Ria
The BTE is available in the below ttling levels:
Fitting level 85
Fitting level 100 (Power instrument)
Introduction to this booklet
This booklet guides you in how to use and maintain your new hearing
aid. Please read the booklet carefully including the Warning section.
This will help you to achieve the full benet of your new hearing aid.
Your hearing care professional has adjusted the hearing instrument
to meet your needs. If you have additional questions, please contact
your hearing care professional.
About Start up Handling Options Warnings More Info
For your convenience this booklet contains a navigation bar to help
you navigate easily through the dierent sections. IMPORTANT NOTICE
The hearing aid amplication is uniquely adjusted and optimised to your
personal hearing capabilities during the instrument tting performed by
your hearing care professional.
Intended use
The hearing aid is intended to amplify and transmit sound to the ear,
and thereby compensate for impaired hearing within mild to severe-
to-profound hearing loss. This hearing aid is intended for use by adults
and children older than 36 months.
Table of contents 1/2
About
Identify your hearing aid style and earpiece 10
BTE with sound hook and mould 12
BTE with thin tube (Corda miniFit) 14
Identify left and right hearing aid 16
Battery 17
Start up
Turn the hearing aid on and off 18
When to replace a battery 19
Replace the battery 20
Handling
Caring for your hearing aid 22
MultiTool for handling batteries and cleaning 23
Sound hook with mould 24
Put on the hearing aid with mould 25
Clean the mould 26
Wash the mould 27
Thin tube (Corda miniFit) 28
Put on the hearing aid with thin tube 29
Clean the thin tube 30
Standard earpieces: dome or Grip Tip 32
Replace dome or Grip Tip 33
Thin tube with Micro mould or LiteTip 34
Clean Micro mould or LiteTip 35
Replace ProWax filter 36
Options
Optional features and accessories 38
Mute the hearing aid 39
Change programs 40
Change volume 42
Tamper-resistant battery drawer 44
Wireless accessories 46
Other options 48
Continues on next page
Table of contents 2/2
Warnings
Warnings 50
More info
Troubleshooting guide 56
Water & dust resistant (IP68) 58
Conditions of use 59
Warranty certificate 60
International warranty 61
Technical information 62
10 11
About Start up Handling Options Warnings More Info
Identify your hearing aid style and earpiece
There are two dierent
attachments and several
dierent earpieces which
classify your hearing aid style.
Please identify your attachment
and earpiece. This will make
it easier for you to navigate
through this booklet.
BTE with sound hook
and mould
A hearing aid with a sound
hook will have a mould as
earpiece.
BTE with thin tube
(Corda miniFit)
Earpieces
A hearing aid with a thin tube
will have one of the following
earpieces:
Ear grip (optional)
Thin
tube
Mould
Tube
Sound
hook
Micro mould or LiteTip
Dome (open dome shown)*
GripTip*
About
* Please see details for replacing the dome or Grip Tip in section: “Replace dome or GripTip”.
12 13
About Start up Handling Options Warnings More Info
BTE with sound hook and mould
What it is What it does
Push button
Battery drawer
Sound hook Microphone
openings
Change
programs,
volume and
mute the
hearing aid
Contains the battery.
Battery drawer is the
on/o switch
Sound in
Sound out
14 15
About Start up Handling Options Warnings More Info
BTE with thin tube (Corda miniFit)
What it is
Push button
Microphone
openings
What it does
Change
programs,
volume and
mute the
hearing aid
Contains the battery.
Battery drawer is also
the on/o switch
Sound in
Battery drawer
Sound out
Thin tube
16 17
About Start up Handling Options Warnings More Info
Identify left and right hearing aid
It is important to distinguish between the left and the right hearing
aid as they might be programmed dierently.
Battery
Your hearing aid is a miniature electronic device that runs on special
batteries. To activate the hearing aid, you must insert a new battery in
the battery drawer. See how in the “Replace the battery” section.
A RED indicator inside the
battery drawer marks the
RIGHT hearing aid.
A BLUE indicator inside the
battery drawer marks the
LEFT hearing aid.
Battery drawer
Your hearing aid
battery size is 13
Pull out to open
18 19
About Start up Handling Options Warnings More Info
Turn the hearing aid on and o
The battery drawer is also used to switch the hearing aid on and o. To
preserve the battery, make sure your hearing aid is switched o when
you are not wearing it.
When to replace a battery
When it is time to replace the battery you will hear two beeps
repeated in moderate intervals until the battery runs out.
Two beeps
= The battery is running low
Four beeps
= The battery has run out
Battery maintenance tip
To make sure the hearing aid is always working bring spare batteries
with you, or replace the battery before you leave home.
Turn ON
Close the
battery
drawer with
the battery
in place.
Turn OFF
Open the
battery drawer.
Start up
Other manuals for miniRITE Alta2
12
This manual suits for next models
5
Table of contents
Other oticon Hearing Aid manuals
oticon
oticon Chili BTE 13 SP User manual
oticon
oticon ConnectClip User manual
oticon
oticon miniRITE Alta2 User manual
oticon
oticon CIC P User manual
oticon
oticon Alta User manual
oticon
oticon Delta series User manual
oticon
oticon ConnectLine Streamer Pro User manual
oticon
oticon Opn 1 User manual
oticon
oticon CROS PX miniRITE R User manual
oticon
oticon miniBTE User manual
oticon
oticon minirite User manual
oticon
oticon Own 1 User manual
oticon
oticon STREAMER PRO Guide
oticon
oticon OPN User manual
oticon
oticon FittingLINK 3.0 User manual
oticon
oticon minirite User manual
oticon
oticon Oticon Opn 1 BTE13 PP User manual
oticon
oticon minirite User manual
oticon
oticon FittingLINK 3.0 User manual
oticon
oticon OPN MINIRITE User manual
