oticon ConnectClip User manual
ConnectClip
Instructions for use
Introduction to this booklet
This booklet gives you guidance on how to use and maintain your new
ConnectClip. Please read the booklet carefully including the Warnings section.
This will help you get the most out of your ConnectClip. If you have additional
questions about the use of ConnectClip, please contact your hearing care
professional.
For your convenience, this booklet contains the below navigation bar to help you
navigate easily through the different sections.
About Start-up Functions Warnings More info
Intended use
Intended use ConnectClip is intended as a wireless receiver and transmitter of
sound between Oticon wireless hearing aids and the surrounding
environment,including speech and wireless electronic audio devices.
ConnectClip furthermore assists hearing aid users to control the
functionality provided by their hearing aid.
Indications for use No indications for use.
Intended user Adults and children older than 36 months.
User environment Indoor / Outdoor.
Contraindications Users of active implants must pay special attention when using the
device. For more information, read the warnings section.
Clinical benefits See clinical benefits of the hearing aid.
Table of contents
About
Package content 6
Getting started 8
ConnectClip overview - main functions 10
Indicator overview 12
Start-up
Pair hearing aids with ConnectClip 14
Pair mobile phone with ConnectClip 16
Turn ConnectClip ON and OFF 18
Charge ConnectClip 20
Functions
Use ConnectClip with a mobile phone 22
Listen to music 28
Use ConnectClip as a remote microphone 30
Use ConnectClip as a remote control for hearing aids 35
Other features and functions 36
Warnings
Warnings 38
More info
Conditions of Use 42
International warranty 43
Technical information 44
ConnectClip
Instructions for use
6 7
About Start-up Functions Warnings More info
Package content
The packaging box consists of the following elements:
ConnectClip
Lanyard - long Lanyard - regular Pouch
Wall charger
(will vary from
country to country)
USB charger cable Protective skin
This booklet
(Instructions for use)
About
8 9
About Start-up Functions Warnings More info
Getting started
Before you can use ConnectClip with your hearing aids, both the hearing aids
and ConnectClip need to be paired (connected). Using ConnectClip with a mobile
phone also requires ConnectClip to be paired with your mobile phone.
Pair hearing aid with ConnectClip Pair ConnectClip with mobile
See page
16
See page
14
10 11
About Start-up Functions Warnings More info
ConnectClip overview - main functions
Microphones
Multi button
- ON/OFF
- Answer phone
- Mode selector
Volume buttons
- Up
- Down
Status
indicator
Power
indicator
Charging socket
(Micro USB)
Clip for
wearing
ConnectClip
Front Back
12 13
About Start-up Functions Warnings More info
Indicator overview
Status indicator Description
Blinking yellow Searching for hearing aids
•Steady yellow Inactive. Hearing aids connected. Not connected to a mobile phone.
Blinking blue Searching for a mobile phone (pairing)
•Steady blue Paired with a mobile phone
•Steady green In a call. Headset or mobile phone.
Blinking green Incoming call
•Steady orange Music; mobile phone
•Steady magenta Remote microphone mode
Power indicator Description
•Steady red Low battery
•Steady green Turned on - not charging
Blinking green Turned on - charging
Fading green Turned on - charging complete
Blinking orange Turned off - charging
•Steady orange Turned off - charging complete
14 15
About Start-up Functions Warnings More info
Pair hearing aids with ConnectClip
1. Ensure ConnectClip is powered off
Press and hold multi button for about
6 seconds until power indicator OFF
2.Set hearing aids in pairing mode
Restart the hearing aids to activate pairing mode.
See how to turn hearing aids ON and OFF
in the hearing aid Instructions for use.
3.The hearing aids is ready
for connection with ConnectClip.
You have 3 minutes to complete the pairing.
4.Turn ON ConnectClip
Press and hold the multi button for about 3 seconds
until the power indicator is STEADY GREEN
20 cm
5.ConnectClip searches for
your hearing aids
Status indicator BLINKING YELLOW
6.Place ConnectClip and both
hearing aids close to each
other (max distance 20cms)
7.Connection established with
hearing aids, the status indicator
is STEADY YELLOW
Start-up
16 17
About Start-up Functions Warnings More info
Press
and hold
Pair mobile phone with ConnectClip
Pairing complete
Pairing complete with mobile phone, the status
indicator is STEADY BLUE
Place ConnectClip in pairing mode
Press and hold the multi button AND
volume up button at the same time
for about 6 seconds until the status
indicator is BLINKING BLUE
ConnectClip will be in pairing
mode for about 3 minutes.
Enable pairing on mobile phone
Turn on Bluetooth. Search for and pair with
ConnectClip.
This is normally in the settings/Bluetooth section
of your phone.
Enter pin code
If your phone requests a pin code enter 0000
(four zeros).
18 19
About Start-up Functions Warnings More info
Turn ConnectClip ON and OFF
ON
Press and hold multi button for about
3 seconds until the power indicator is
STEADY GREEN.
OFF
Press and hold multi button for about
6 seconds until the power indicator is
OFF.
Use Capacity
Typical daily use 16 hours: Up to 2 hours music streaming + 2 hours phone
+ 12 hours standby
Standby (Turned on, no Streaming) Up to 36 hours
Music or Remote microphone Up to 5 hours
Phone calls Up to 6 hours
IMPORTANT NOTICE
Use a soft, damp cloth to clean ConnectClip. It must never be washed or immersed in
water or other liquids.
Do not wear your ConnectClip while showering or participating in water activities.
Do not immerse your ConnectClip in water or other liquids.
Other manuals for ConnectClip
6
Table of contents
Other oticon Hearing Aid manuals
oticon
oticon More Series User manual
oticon
oticon ConnectLine Streamer Pro User manual
oticon
oticon Acto CIC User manual
oticon
oticon Intent 1 miniRITE User manual
oticon
oticon Delta 4000 User manual
oticon
oticon miniRITE Alta2 User manual
oticon
oticon REM AutoFit User manual
oticon
oticon FittingLINK 3.0 User manual
oticon
oticon Dual User manual
oticon
oticon Agil User manual
oticon
oticon Acto User manual
oticon
oticon ConnectLine Manual
oticon
oticon OPN User manual
oticon
oticon FittingLINK 3.0 User manual
oticon
oticon designRITe Alta User manual
oticon
oticon Opn Series User manual
oticon
oticon minirite User manual
oticon
oticon Corda miniFit Configuration guide
oticon
oticon Engage miniRITE User manual
oticon
oticon STREAMER PRO User manual
