Osram e:cue SYMPL dmx User guide
AB444180035
e:cue SYMPL dmx Node
Setup Manual / Installationsanleitung
Our Brand
www.osram.com/ecue
Light is OSRAM
02
AB444180035
e:cue SYMPL dmx Node Setup Manual (original issue)
e:cue SYMPL dmx Node Installationsanleitung (Originalversion)
Edition/Ausgabe: 01.08.22 [EN_DE_SYMPL_dmx_Node_Setup_v2p7]
Published by / Herausgegeben von:
OSRAM GmbH
Karl-Schurz-Strasse 38
33100 Paderborn, Germany
©2022 OSRAM GmbH, BU Digital
All rights reserved / Alle Rechte vorbehalten
Read the Setup Manual
carefully before unpacking the
product. Subject to
modication without prior
notice. Typographical and other
errors do not justify any claim
for damages. All dimensions
should be veried using an
actual part.
Except for internal use,
relinquishment of the
instructions to a third party,
duplication in any type or form
- also extracts - as well as
exploitation and/or
communication of the contents
is not permitted.
Lesen Sie die
Installationsanleitung vor dem
Auspacken des Produktes
sorgfältig durch. Alle Änderungen
vorbehalten.
Rechtschreibfehler oder andere
Fehler rechtfertigen keinen
Anspruch bei Schäden. Alle
Maße sollten an einem realen
Gerät überprüft werden.
Außer für interne Verwendung ist
die Überlassung dieser Anleitung
an Dritte, die gesamte oder
auszugsweise Veröffentlichung,
Verwertung oder Mitteilung in
jeglicher Art und Form sind nicht
gestattet.
03
Table of Contents / Inhalt
Table of Contents / Inhalt
English 06
1 Security instructions 07
1.1 Symbols 07
1.2 General security instructions 07
2 General device description 08
2.1 Delivery content 08
2.2 Connectors and interfaces 09
2.3 User interface: LEDs 09
2.4 Identify button: Identication & Reset & Testing 10
3 General remarks 12
3.1 Transport 12
3.2 Unpacking 12
3.3 Warranty regulations 12
3.4 Maintenance and Repair 12
3.5 Disposal 13
3.6 Support 13
4 Installation 13
4.1 Installation conditions 14
4.2 Mounting process 14
4.3 Ethernet connection 14
4.4 DMX connection 15
4.5 Power supply 15
5 Network configuration 16
5.1 Default network properties 16
5.2 Network conguration with SYMPHOLIGHT 17
5.3 Network conguration with the web interface 17
5.4 Extended DMX/RDM settings 19
7 Firmware Update 22
04
Table of Contents / Inhalt
8 Dismounting 22
9 Product specifications 22
10 Certifications 24
Deutsch 25
11 Sicherheitshinweise 26
11.1 Symbole 26
11.2 Hinweise 26
12 Gerätebeschreibung 27
12.1 Lieferumfang 27
12.2 Anschlüsse und Schnittstellen 28
12.3 Benutzeroberäche: LEDs 28
12.4 Identify-Taster: Identikation & Reset & Test 29
13 Allgemeine Hinweise 31
13.1 Transport 31
13.2 Entpacken 31
13.3 Garantiebestimmungen 31
13.4 Reparatur und Wartung 32
13.5 Entsorgung 32
13.6 Technischer Support 33
14 Installation 33
14.1 Installationsbedingungen 33
14.2 Montage 34
14.3 Ethernet-Verbindung 34
14.4 DMX-Verbindung 35
14.5 Stromversorgung 35
15 Netzwerk-Konfiguration 36
15.1 Standardeinstellungen vom Netzwerk 36
15.2 Netzwerkeinstellung über SYMPHOLIGHT 37
15.3 Netzwerkeinstellung über die Webschnittstelle 38
15.4 DMX/RDM- Einstellungen 40
17 Firmware-Update 43
05
Table of Contents / Inhalt
18 Demontage 43
19 Produktdaten 44
20 Zertifizierung 45
Dimensions / Abmessungen 46
06
English
07
Security instructions
1 Security instructions
Please read the safety instructions, provided in a separate manual, carefully.
Make sure that the environmental, mounting, and installation prerequisites
are met. This manual should be kept at a safe place and in reach of the
installation.
1.1 Symbols
!
The exclamation mark warns about possible damage of the
device itself or connected devices.
i
The information symbol gives general hints and informs
about handling and procedures for use of the device.
1.2 General security instructions
!
Connect cables and data only when the device is powered
down.
!
The device must be supplied by a separate certied SELV
Class 2 power supply.
!
The maximum length of each connected cable is 30 m.
i
If safety instructions are missing, please contact OSRAM to
receive a new copy.
08
General device description
2 General device description
e:cue SYMPL Nodes are a system of interfaces for e:cue SYMPHOLIGHT
only. They provide various connection types like DMX512, DALI, digital
inputs and outputs etc. SYMPL Nodes always operate in online mode, as a
device interface for SYMPHOLIGHT. All interactions are initiated and
controlled by SYMPHOLIGHT. Connections between servers, Cores and
Nodes are always made with e:net via Ethernet.
The SYMPL dmx Node is a two-channel DMX and RDM interface for use
with e:cue’s lighting control solution SYMPHOLIGHT. It provides two
independent DMX/RDM interfaces for two DMX512 universes. The
SYMPL dmx Node can be powered by an external power supply or via
Power-over-Ethernet. It is easily mounted on standard 35 mm DIN rails, or
with a key hole in the housing base on walls or on any stable vertical
surface. The SYMPL dmx Node is a simple, reliable and easy to use
interface solution for e:cue lighting control solutions with SYMPHOLIGHT.
2.1 Delivery content
Delivery content for the e:cue SYMPL dmx Node (AB444180035):
1. e:cue SYMPL dmx Node
2. Safety instructions
3. Welcome note (English)
i
To operate SYMPL Nodes a SYMPHOLIGHT version 2.0 or
higher or a Lighting Application Suite version 7.0 SR2 or
higher is mandatory.
i
e:cue SYMPL dmx Node is not hot-pluggable.
09
General device description
2.2 Connectors and interfaces
View from top
1DMX output 1
(GND, DMX–, DMX+ left to right)
2DMX output 2
(GND, DMX–, DMX+ left to right)
3DMX/RDM 1 status LED
4DMX/RDM 2 status LED
5Test / Error LED
6e:net LED (Ethernet, LAN activity)
7Status LED (Device status)
8Identify button
9Power supply
(Vcc+, Vcc– left to right)
10 e:net / Ethernet
2.3 User interface: LEDs
The SYMPL dmx Node has ve LEDs. The ve LEDs show the basic states
of the SYMPL Node.
LEDs
Status On: If constantly on, the device is online. Server
application is in operation.
Blinking: If blinking in one second intervals, the device is
ofine, no connection to a SYMPHOLIGHT server or
Core is available. If blinking more rapidly, the device is in
bootloader mode.
10
General device description
e:net Off: no link available.
On: link established.
Blinking: e:net trafc.
Test / Error Off: no error detected.
Short-short-long sequence: Test mode active.
On: If constantly lights in red, an error occurred. This
can be an internal error or malfunction of the device, or
an external error, e.g. a shortcut of interface
connections or alien power supply. Switch the device off
and on. If the error persists, check the wiring or contact
OSRAM Service.
Status +
Test / Error
The Status and Test / Error LED blink simultaneously to
identify the SYMPL Node (enabled “Identify Interface
Mode” in SYMPHOLIGHT).
DMX/RDM 1
and 2
Orange: DMX/RDM data outgoing.
White: e:pix data outgoing.
Blue: data incoming.
Orange + White: port error.
2.4 Identify button: Identification & Reset & Testing
The Identify button has four functions: to send an Identify message (A), to
reset the Node (B), to test the installation (C), and to exit the error state (D).
(A) A short press during operation in online mode sends an Identify
message to the server. This helps to assign the Node in the Layout in
SYMPHOLIGHT.
(B) The Identify button can also be used to reset the device to factory state
or to stay in bootloader mode:
• Keep the Identify button pressed while powering up, Status and
Test / Error light up at rst. Bootloader mode is signaled by a fast
blinking Status LED. Release the button now. The device stays in
bootloader mode to download a new rmware.
This manual suits for next models
1
Table of contents
Languages:
Other Osram Recording Equipment manuals
Osram
Osram e:cue SYMPL input Node User guide
Osram
Osram e:cue SYMPL Core S User guide
Osram
Osram e:cue SYMPL relay Node User guide
Osram
Osram e:cue SYMPL bridge Node Specification sheet
Osram
Osram e:cue SYMPL dali Node User guide
Osram
Osram e:cue SYMPL Switch User guide
Osram
Osram e:cue Bridge8 Specification sheet
Osram
Osram e:cue SYMPL e:bus Node User guide
