Osram e:cue SYMPL dali Node User guide
AB444230035
e:cue SYMPL dali Node
Setup Manual / Installationsanleitung
Our Brand
www.osram.com/ecue
Light is OSRAM
02
AB444230035
e:cue SYMPL dali Node Setup Manual (original issue)
e:cue SYMPL dali Node Installationsanleitung (Originalversion)
Edition/Ausgabe: 23.08.19 [EN_DE_SYMPL_dali_Node_Setup_v3p0]
Published by / Herausgegeben von:
OSRAM GmbH
Karl-Schurz-Strasse 38
33100 Paderborn, Germany
©2019 OSRAM GmbH, BU Digital
All rights reserved / Alle Rechte vorbehalten
Read the Setup Manual
carefully before unpacking the
product. Subject to
modication without prior
notice. Typographical and other
errors do not justify any claim
for damages. All dimensions
should be veried using an
actual part.
Except for internal use,
relinquishment of the
instructions to a third party,
duplication in any type or form
- also extracts - as well as
exploitation and/or
communication of the contents
is not permitted.
Lesen Sie die
Installationsanleitung vor dem
Auspacken des Produktes
sorgfältig durch. Alle Änderungen
vorbehalten.
Rechtschreibfehler oder andere
Fehler rechtfertigen keinen
Anspruch bei Schäden. Alle
Maße sollten an einem realen
Gerät überprüft werden.
Außer für interne Verwendung ist
die Überlassung dieser Anleitung
an Dritte, die gesamte oder
auszugsweise Veröffentlichung,
Verwertung oder Mitteilung in
jeglicher Art und Form sind nicht
gestattet.
03
Table of Contents / Inhalt
Table of Contents / Inhalt
English 06
1 Security instructions 07
1.1 Symbols 07
1.2 General security instructions 07
2 General device description 08
2.1 Delivery content 08
2.2 Connectors and interfaces 09
2.3 User interface: LEDs 09
2.4 Identify button: Identication & Reset & Testing 10
3 General remarks 12
3.1 Transport 12
3.2 Unpacking 12
3.3 Warranty regulations 12
3.4 Maintenance and Repair 12
3.5 Disposal 13
3.6 Support 13
4 Installation 13
4.1 Installation conditions 14
4.2 Mounting process 14
4.3 Ethernet connection 15
4.4 DALI connection 15
4.5 Power supply 15
5 Network configuration 17
5.1 Default network properties 17
5.2 Network conguration with SYMPHOLIGHT 17
5.3 Network conguration with the web interface 18
5.4 Extended DALI settings 20
6 Test mode 21
04
Table of Contents / Inhalt
7 Firmware Update 22
8 Dismounting 23
9 Product specifications 23
10 Certifications 25
Deutsch 26
11 Sicherheitshinweise 27
11.1 Symbole 27
11.2 Hinweise 27
12 Gerätebeschreibung 28
12.1 Lieferumfang 28
12.2 Anschlüsse und Schnittstellen 29
12.3 Benutzeroberäche: LEDs 29
12.4 Identify-Taster: Identikation & Reset & Test 30
13 Allgemeine Hinweise 32
13.1 Transport 32
13.2 Entpacken 32
13.3 Garantiebestimmungen 32
13.4 Reparatur und Wartung 32
13.5 Entsorgung 33
13.6 Technischer Support 33
14 Installation 33
14.1 Installationsbedingungen 34
14.2 Montage 34
14.3 Ethernet-Verbindung 35
14.4 DALI-Verbindung 35
14.5 Stromversorgung 36
15 Netzwerk-Konfiguration 37
15.1 Standardeinstellungen vom Netzwerk 37
15.2 Netzwerkeinstellung über SYMPHOLIGHT 38
15.3 Netzwerkeinstellung über die Webseite 39
15.4 Erweiterte DALI Einstellungen 41
06
English
07
Security instructions
1 Security instructions
Please read the safety instructions, provided in a separate manual, carefully.
Make sure that the environmental, mounting, and installation prerequisites
are met. This manual should be kept at a safe place and in reach of the
installation.
1.1 Symbols
!
The exclamation mark warns about possible damage of the
device itself or connected devices.
i
The information symbol gives general hints and informs
about handling and procedures for use of the device.
1.2 General security instructions
!
Connect cables and data only when the device is powered
down.
!
For electrical safety reasons it is not allowed that SYMPL dali
Nodes share the same power supply with other SYMPL
nodes, such as SYMPL dmx Node etc.
Please make sure to use one dedicated power supply unit
only for the DALI devices.
!
The device must be supplied by a separate certied SELV
Class 2 power supply.
!
The maximum length of each connected cable is 30 m.
i
If safety instructions are missing, please contact OSRAM to
receive a new copy.
08
General device description
2 General device description
e:cue SYMPL Nodes are a system of interfaces for e:cue SYMPHOLIGHT
only. They provide various connection types like DMX512, DALI, digital
inputs and outputs etc. SYMPL Nodes always operate in online mode, as a
device interface for SYMPHOLIGHT. All interactions are initiated and
controlled by SYMPHOLIGHT. Connections between servers, Cores and
Nodes are always made with e:net via Ethernet.
The e:cue SYMPL dali Node is a single line DALI interface. It provides a
DALI interface for up to 64 DALI devices in one line including bus power
and full support for DALI ballast and OSRAM sensors / inputs. The
SYMPL dali Node is powered by an external power supply. It is easily
mounted on standard 35 mm DIN rails, or with a key hole in the housing
base on walls or on any stable vertical surface. Via SYMPHOLIGHT, DALI
commands like linear dimming curve (DT6), RGB, RGBW, and Color
Temperature (DT8) are supported. The SYMPL dali Node is a simple,
reliable and easy to use interface solution for e:cue lighting control solutions
with SYMPHOLIGHT
2.1 Delivery content
Delivery content for the e:cue SYMPL dali Node (AB444230035):
1. e:cue SYMPL dali Node
2. Safety instructions
3. Installation guide (English only)
i
To operate SYMPL Nodes a SYMPHOLIGHT version 2.0 or
higher is mandatory. Earlier versions do not support the
SYMPL Nodes. SYMPL Nodes are not supported by the
e:cue Lighting Application Suite.
i
e:cue SYMPL dali Node is not hot-pluggable.
09
General device description
2.2 Connectors and interfaces
View from top
1DALI interface
(left to right : DA -, DA +)
2Identify button
3e:net / Ethernet
4DIN rail handle
5Power supply
(left to right : V +, V –)
6Status LED (Device status)
7e:net LED (Ethernet, LAN activity)
8Test / Error LED
9Active LED
10 Bus LED
2.3 User interface: LEDs
The SYMPL dali Node has ve LEDs. The ve LEDs show the basic states
of the SYMPL Node.
LEDs
Status On: If constantly on, the device is online. Server
application is in operation.
Blinking: If blinking in one second intervals, the device is
ofine, no connection to a SYMPHOLIGHT server or
Core is available. If blinking more rapidly, the device is in
bootloader mode
1
2
3
4
5
6
7
8
9 10
DA - DA +
V + V -
10
General device description
e:net Off: no link available.
On: link established.
Blinking: e:net trafc.
Test / Error Off: no error detected.
Short-short-long sequence: Test mode active.
On: If constantly lights in red, an error occurred. This
can be an internal error or malfunction of the device, or
an external error, e.g. a shortcut of interface
connections or alien power supply. Switch the device off
and on. If the error persists, check the wiring or contact
OSRAM Service.
Status +
Test / Error
The Status and Test / Error LED blink simultaneously to
identify the SYMPL Node (enabled “Identify Interface
Mode” in SYMPHOLIGHT).
Active Yellow blinking: data output from the DALI Node to the
xtures.
Blue blinking: incoming data to the DALI Node.
Bus Off: SYMPL dali Node is not connected to DALI bus.
On: DALI bus ready to operate.
Blinking: alien power supply detected.
2.4 Identify button: Identification & Reset & Testing
The Identify button has four functions: to send an Identify message (A), to
reset the Node (B), to test the installation (C), and to exit the error state (D).
(A) A short press during operation in online mode sends an Identify
message to the server. This helps to assign the Node in the Layout in
SYMPHOLIGHT.
(B) The Identify button can also be used to reset the device to factory state
or to stay in bootloader mode:
This manual suits for next models
1
Table of contents
Languages:
Other Osram Recording Equipment manuals
Osram
Osram e:cue SYMPL Core S User guide
Osram
Osram e:cue SYMPL dmx User guide
Osram
Osram e:cue SYMPL Switch User guide
Osram
Osram e:cue SYMPL relay Node User guide
Osram
Osram e:cue SYMPL input Node User guide
Osram
Osram e:cue SYMPL e:bus Node User guide
Osram
Osram e:cue SYMPL bridge Node Specification sheet
Osram
Osram e:cue Bridge8 Specification sheet
