ORiNG IDS-5042-WG Series User manual
Industrial Device Server User’s Manual
IDS-5042-WG / 5042-IWG Series
Version 1.0
May 2008.
ORing Industrial Networking Corp.
4F., NO.3, Lane235, Baociao Rd.Sindian City,
Taipei County 23145 Taiwan, R.O.C.
Tel: + 886 2 2918 3036
Fax:+ 886 2 2918 3084
Website : www.oring-networking.com
Table of Content
GETTING TO KNOW YOUR DEVICE SERVER ...............................................................................................1
1.1 About the IDS-5042-WG / 5042-IWG Serial Device Server ..............................................................1
1.2 Software Features ............................................................................................................................1
1.3 Hardware Features ...........................................................................................................................2
HARDWARE INSTALLATION .......................................................................................................................3
2.1 Install IDS-5042-WG / 5042-IWG on DIN-Rail ..................................................................................3
2.1.1 Mount IDS-5042-WG / 5042-IWG on DIN-Rail.............................................................................3
2.2 Wall Mounting Installation .................................................................................................................4
2.2.1 Mount IDS-5042-WG / 5042-IWG on wall ....................................................................................5
HARDWARE OVERVIEW ............................................................................................................................8
3.1 Front Panel .......................................................................................................................................8
3.2 Front Panel LEDS.............................................................................................................................9
3.3 Serial Ports .....................................................................................................................................10
3.4 Bottom Panel .................................................................................................................................. 11
3.5 Rear Panel......................................................................................................................................12
CABLES ............................................................................................................................................... 13
4.1 Ethernet Cables ..............................................................................................................................13
MANAGEMENT INTERFACE .................................................................................................................... 15
5.1 DS-Tool...........................................................................................................................................15
5.1.1 Install IDS-Tool...........................................................................................................................15
5.1.2 Using DS-Tool ............................................................................................................................17
5.1.2.1 Explore device servers .....................................................................................................17
5.1.2.2 Configure device servers..................................................................................................18
5.1.2.3 Configure serial port .........................................................................................................26
5.2 Configuration by Web Browser .......................................................................................................35
5.2.1 Connect to the Web page ..........................................................................................................35
5.2.1.1 System .............................................................................................................................37
5.2.1.2 Port serial setting..............................................................................................................42
IDS-5042-WG Series User’s Manual
5.2.1.3 Management ....................................................................................................................50
5.2.1.4 Save/Reboot.....................................................................................................................54
5.3 Configuration by SSH Console .......................................................................................................55
5.3.1 Connect to DS............................................................................................................................55
TECHNICAL SPECIFICATIONS ................................................................................................................. 56
IDS-5042-WG Series User’s Manual
1 ORing Industrial Networking Corp.
Getting to Know Your Device Server
1.1 About the IDS-5042-WG / 5042-IWG Serial Device Server
IDS-5042-WG / 5042-IWG is an innovative 4 ports RS232/422/485 to
802.11b/g WLAN and 2 ports LAN device server. Users are able to
configure the Switch by DS-Tool via LAN port or WLAN interface, but
not simultaneously. Once LAN port is activated, WLAN interface will
enter standby mode to minimize power consumption. IDS-5042-WG
/ 5042-IWG offers many powerful features for HW & SW redundant
functions. When the connection between master-link and LAN fails,
IDS-5042-WG / 5042-IWG can automatically switch to another LAN
port within 10mS, and still guarantees a non-stop connection.
IDS-5042-WG / 5042-IWG also supports switch mode, users can use
Daisy Chain to reduce the usage of Ethernet switch ports. Secondly,
IDS-5042-WG / 5042-IWG can simultaneously transfer data into 5
host PCs. This feature can assure all critical data that saved in different host PCs to avoid
Ethernet break or host PCs failure.
Thirdly, IDS-5042-WG / 5042-IWG provides dual redundant power inputs on terminal block.
IDS-5042-WG / 5042-IWG also provides NAT pass through function so that users are able to
manage IDS-5042-WG / 5042-IWG inside or outside the NAT router. It is easy for different IP
domain users to use IDS-5042-WG / 5042-IWG. Therefore, IDS-5042-WG / 5042-IWG is the
best communication solution for wireless application of quad-port serial devices.
1.2 Software Features
Redundant Dual Ethernet Ports: Recovery time < 10ms.
IDS-5042-WG Series User’s Manual
ORing Industrial Networking Corp 2.
Switch Mode Supported: Daisy Chain support to reduce usage of switch ports.
High Speed Air Connectivity: WLAN interface support up to 54Mbps link speed
NAT-pass through: User can manage IDS-5042-WG / 5042-IWG through NAT router.
Highly Security Capability: WEP/WPA/WPA2/TKIP supported
Redundant Power Inputs: 12~48VDC on terminal block.
Redundant multiple host devices: 5 simultaneous in Virtual COM, TCP Server, TCP Client
mode, UDP.
Secured Management by HTTPS and SSH.
Versatile Modes: Virtual Com, Serial Tunnel, TCP Server, TCP Client, UDP
Event Warning by Syslog, Email, SNMP trap, Relay and Beeper
Various Windows O.S. supported: Windows NT/2000/ XP/ 2003/VISTA 32bits
1.3 Hardware Features
Redundant Power Inputs: 12~48 VDC on terminal block and power jack
Operating Temperature: -10 to 55oC
Storage Temperature: -20 to 85oC
Operating Humidity: 5% to 95%, non-condensing
Casing: IP-30
2 10/100Base-T(X) Ethernet port
Dimensions(W x D x H) : 52 mm(W)x 106 mm( D )x 144 mm(H)
IDS-5042-WG Series User’s Manual
3 ORing Industrial Networking Corp.
Hardware Installation
2.1 Install IDS-5042-WG / 5042-IWG on DIN-Rail
Each IDS-5042-WG / 5042-IWG has a Din-Rail kit on rear panel. The Din-Rail kit helps
IDS-5042-WG / 5042-IWG to fix on the Din-Rail. It is easy to install the IDS-5042-WG /
5042-IWG on the Din-Rail:
2.1.1 Mount IDS-5042-WG / 5042-IWG on DIN-Rail
Step 1: Slant the IDS-5042-WG / 5042-IWG and mount the metal spring to Din-Rail.
Figure 2-1
Metal Spring
IDS-5042-WG Series User’s Manual
ORing Industrial Networking Corp 4.
Step 2: Push the IDS-5042-WG / 5042-IWG toward the Din-Rail until you heard a “click”
sound.
Figure 2-2
2.2 Wall Mounting Installation
Each IDS-5042-WG / 5042-IWG has another installation method for you. A wall mount panel
can be found in the package. The following steps show how to mount the IDS-5042-WG /
5042-IWG on the wall:
IDS-5042-WG Series User’s Manual
5 ORing Industrial Networking Corp.
2.2.1 Mount IDS-5042-WG / 5042-IWG on wall
Step 1: Remove Din-Rail kit.
Figure 2-3
IDS-5042-WG Series User’s Manual
ORing Industrial Networking Corp 6.
Pozidrive
Step 2: Use 6 screws that can be found in the package to combine the wall mount panel.
Just like the picture shows below:
Figure 2-4
The screws specification shows in the following two pictures. In order to prevent
IDS-5042-WG / 5042-IWG from any damage, the size of screws should not be larger than
the size that used in IDS-5042-WG / 5042-IWG.
Figure 2-5
This manual suits for next models
4
Table of contents
Other ORiNG Server manuals
ORiNG
ORiNG IDS-5042 Series User manual
ORiNG
ORiNG IDS-5612 Series User manual
ORiNG
ORiNG IDS-1112 User manual
ORiNG
ORiNG IDS-4312+ User manual
ORiNG
ORiNG IDS-1112 User manual
ORiNG
ORiNG IDS-5011F Series User manual
ORiNG
ORiNG IDS-342GT User manual
ORiNG
ORiNG IDS-342GT+ User manual
ORiNG
ORiNG IDS-312L User manual
ORiNG
ORiNG IDS-181A User manual
