Orca PGD TOUCH MONO Installation guide
QUICK MANUAL FOR CONTROLLER PGD TOUCH
MONO & DUO
V1_2022
Quick manual TOUCH display
II
Quick manual TOUCH display
III
Manuals are made for different series of devices. Because of that reason there could be some differences
between real parameters, dimensions or pictures.
We reserve the right to change the technical or any other specifications without notice and without liability.
We do not take responsibility for typographical errors.
This work is copyrighted. Any use outside the boundaries of the copyright law without the consent of Orca
Energija d.o.o. is illegal and punishable by law. With this release, all previous versions are invalid.
Quick manual TOUCH display
iv
CONTENT
1GENERAL___________________________________________________________________________ 1
1.1 Basic display _____________________________________________________________________________ 1
2SETTINGS ACCESSIBLE FROM MAIN MENU________________________________________________ 2
3BASIC SETTINGS _____________________________________________________________________ 5
3.1 I WANT TO SWITCH THE HEAT PUMP ON/OFF. __________________________________________________ 5
3.2 I WANT TO CHANGE THE MENU LANGUAGE ____________________________________________________ 6
3.3 I WANT TO SET THE TIME AND DATE __________________________________________________________ 7
3.4 I WOULD LIKE TO SET THE TIME PROGRAMS ____________________________________________________ 8
3.5 I WANT TO ACTIVATE TIME PROGRAMS FOR HEATING CIRCLES ____________________________________ 10
3.5.1 Method 1 _______________________________________________________________________________________10
3.5.2 Method 2 _______________________________________________________________________________________11
4DHW _____________________________________________________________________________ 12
4.1 I WANT TO SET THE DESIRED DHW TEMPERATURE ______________________________________________ 12
4.1.1 Method 1 _______________________________________________________________________________________12
4.1.2 Method 2 _______________________________________________________________________________________13
4.2 I WANT TO ACTIVATE/DEACTIVATE THE ANTILEGIONELA PROGRAM ________________________________ 15
4.3 I WANT TO SWITCH ON/OFF THE ELECTRIC HEATERS ____________________________________________ 18
5OPERATION OF THE HEATING CIRCLES DC1, DC2, DC3, MC1 and MC2 _________________________ 19
5.1 I WANT TO CHANGE THE DESIRED TEMPERATURE FOR HEATING AND COOLING_______________________ 19
5.2 I WANT TO SWITCH OFF THE HEATING________________________________________________________ 20
5.2.1 Method 1 _______________________________________________________________________________________20
5.2.2 Method 2 _______________________________________________________________________________________21
5.3 I WANT TO SWITCH ON THE HEATING ________________________________________________________ 22
5.3.1 Method 1 _______________________________________________________________________________________22
5.3.2 Method 2 _______________________________________________________________________________________23
5.4 I WANT TO SWITCH ON THE COOLING ________________________________________________________ 25
5.4.1 Method 1 _______________________________________________________________________________________25
5.4.2 Method 2 _______________________________________________________________________________________26
5.5 I WANT TO SWITCH OFF THE COOLING _______________________________________________________ 28
5.5.1 Method 1 _______________________________________________________________________________________28
5.5.2 Method 2 _______________________________________________________________________________________29
5.6 I WANT TO ADJUST THE PARALLEL CORRECTION AND THE SLOPE OF THE HEATING CURVE ______________ 30
5.6.1 Method 1 _______________________________________________________________________________________30
5.6.2 Method 2 _______________________________________________________________________________________31
Service manual TOUCH display
1
1GENERAL
1.1 Basic display
In each menu you can change the value with buttons UP and DOWN:
With button BACK , you can return to previous settings.
With button NEXT , you can move to next settings.
With button HOME , you can return to main screen.
When you change individual parameters, buttons and are displayed.
With the SAVE button, you can confirm settings, with the CANCEL button, you can return the value to previous.
- Room temperature of
heating circle 1
- Press: access to quick
temperature settings for
heating circle 1
- Room temperature of
heating circle 2
- Press: access to quick
temperature settings for
heating circle 2
- Room temperature of
heating circle 3
- Press: access to quick
temperature settings for
heating circle 3
- Date and time
information
- Outdoor temperature
- Press: access to quick
temperature display
- Press: access to settings
- Press: quick settings for unit
operation
(NORMAL, ECO,
PARTY and HOLIDAY)
- Unit status (HEATING,
COOLING, DEFROSTING)
- Heat pump outlet
temperature
-
Press: Quick choice for
working regime
Red square – active heating
Blue square – active cooling
Whight square - off
- DHW Temperature
- Press: quick setting for
desired DHW temperature
- Activity
indicator for
heating circle
2.
- Activity indicator for
electric heater.
- Display of how many
electric heater rates are in
operation.
- Activity indicator for
EVU blockage.
- PV program indicator
- Activity indicator for heating
circle 3.
Quick manual TOUCH display
2
2SETTINGS ACCESSIBLE FROM MAIN MENU
-Press on HEATING CIRCLE 1,2 or 3:
In the first menu you can set the desired room temperature (if control according to room or room + outdoor temperature
is activated). With press on NEXT button, you move to the next screen:
On this screen you can change the curve in parallel and its slope (if regulation according to outdoor temperature is
activated). With press on NEXT button, you move to the next screen:
On this screen you can choose timer for selected heating circle (24-hour operation or timer 1 to 5).
- Press on DHW:
In the first menu you can set the desired water temperature. With press on NEXT burton, you move to the next screen:
Quick manual TOUCH display
3
On this screen you can choose timer for DHW heating (24-hour operation or timer 1 to 5).
- Press on HEAT PUMP:
In this menu you can set the desired working regime of complete system:
- INACTIVE: unit is running according to settings for each heating/cooling circle
- COOLING: all heating circles are deactivated and all cooling circles are activated (DHW heating is activated)
- HEATING: all cooling circles are deactivated and all heating circles are activated (DHW heating is activated)
- OFF: all heating/cooling circles are deactivated (DHW heating is activated)
- Press on MENU TO CHOOSE HIGHER/LOWER REGIME OPERATION:
When pressed, a pop-up menu is shown where you can choose:
- NORMAL OPERATION: unit is running according to settings and timers
- PARTY: if you press on PARTY, a new display is shown:
In this menu you can set how many hours will the unit still operate in HIGHER REGIME (even if timer is set different).
Quick manual TOUCH display
4
- ECO: if you press on ECO, a new display is shown:
In this menu you can set how many hours will the unit still operate in LOWER REGIME (even if timer is set different).
- HOLIDAY: if you press on HOLIDAY, a new display is shown:
In this menu you can set the date, to which the unit will operate in LOWER REGIME (even if timer is set different).
-Press on BUTTON SETTINGS
After pressing this button, the next display is shown:
- To change the language, just press
on this icon.
- With this button you can move up in
menu to access the desired settings
- With this button, a technician can
access the menu to enter the service
code and open complete service
settings.
- Menu to choose the desired settings
Quick manual TOUCH display
5
3BASIC SETTINGS
3.1 I WANT TO SWITCH THE HEAT PUMP ON/OFF.
1. On the main screen, please touch the icon .
2. On the popup window, please select BASIC SETINGS.
3. With pressing the icon the ON or OFF of the HP can be chosen.
4. Every change of the setting is stored and confirmed with pressing the icon.
5. Exiting the menu is done by pressing the icon .
Quick manual TOUCH display
6
3.2 I WANT TO CHANGE THE MENU LANGUAGE
1. On the main screen, please touch the icon ..
2. On the popup window, please select FLAG.
3. Press the icon until the desired language is selected. The following languages are available:
•English language
•Polish language
•Italian language
•French language
•Slovenian language
•German language
•Croatian language
•Slovak language
4. Exiting the menu is done by pressing the icon .
This manual suits for next models
1
Table of contents
Other Orca Controllers manuals
Popular Controllers manuals by other brands
Digiplex
Digiplex DGP-848 Programming guide
YASKAWA
YASKAWA SGM series user manual
Sinope
Sinope Calypso RM3500ZB installation guide
Isimet
Isimet DLA Series Style 2 Installation, Operations, Start-up and Maintenance Instructions
LSIS
LSIS sv-ip5a user manual
Rockwell Automation
Rockwell Automation 1769-L31 installation instructions
