OPTO-EDU A12.0911 User manual

A12.0911

Biological Microscope

Instruction Manual

This instruction manual is for the operation guide, troubleshooting and

maintenance to the biological microscope. Please study this manual

thoroughly before operating, and keep it with the instrument. The

manufacturer reserves the rights to the modifications by technology

development. On the basis of operation ensured, technical specifications

may be subject to changes without notice.

Contents

Series

Before Use

1. Components.........................................................................................................................1

2. Assembling..........................................................................................................................5

2-1 Assembling Scheme......................................................................................................5

2-2 Assembling Steps..........................................................................................................6

3. Operations...........................................................................................................................8

3-1 Set Illumination.............................................................................................................8

3-2 Adjust Color Temperature.............................................................................................8

3-3 LCD Display.................................................................................................................8

3-4 Place the Specimen Slide..............................................................................................9

3-5 Adjust the Focus............................................................................................................9

3-6 Adjust the Focusing Tension.........................................................................................9

3-7 Adjust the Diopter.........................................................................................................9

3-8 Adjust the Interpupillary Distance ..............................................................................10

3-9 Center the Condenser..................................................................................................10

3-10 Adjust the Field Diaphragm......................................................................................10

3-11 Aperture Diaphragm..................................................................................................11

3-12 Use the Oil Objective (100X) ...................................................................................11

3-13 Use the Filter.............................................................................................................12

3-14 Use Button and Interface of the Digital Head...........................................................12

4. Assembling and Operation of Accessories......................................................................13

4-1 Assembling and Operation of the LED Fluorescence Device.....................................13

4-2 Assembling and using of the TV Device.....................................................................15

4-3 Assembling the Photography Device..........................................................................15

4-4 Assembling the Phase Contrast Device.......................................................................16

4-5 Assembling and Operation of Dark Field Flapper ......................................................17

4-6 Assembling and Operation of Simple Polarizing........................................................17

4-7 Operation of Digital Observation Head ......................................................................18

5. Troubleshooting................................................................................................................19

Before Use

Series

1. Operation Notice

Fig.1

Fig.2

Fig.3

1. As the microscope is a high precision

instrument, always operate it with care. Do not

expose the microscope in the sun directly, either

not in the high temperature, damp, dust or acute

shake. Make sure the worktable is flat and

horizontal. Following environment is required

when operating: Indoor temperature: 5℃～40℃,

Max relative humidity: 80%.

2. When moving the microscope, use both hands

to hold its back hand-clasping ① and the front

base ②, and lay it down carefully (see Fig. 1).

★It will damage the microscope by holding

the stage, focusing knob or head when

moving.

3. When working, the surface of condenser will

be very hot. Make sure there is enough room for

the heat dissipating around the condenser③ (see

Fig. 2).

4. For safety, make sure the power switch ④ is

at “O” (off) and power it off before replacing the

LED lamp, and wait until the lamp and base cool

down completely (see Fig. 3).

★Bulb selected only: single 3W LED（class

3B）

5. External power supply adaptor is adopted.

Wide voltage range is supported as 100~240V.

6. Use the special wire supplied byour company.

7. USB cable should meet the requirements of

[GB4943 Information Technology Equipment

Security].

8. The device should be placed in a well

ventilated area or where the vents should not be

blocked.

9. All the power OFF devices have been set in

the position where is easy to operate.

10. Please put the power plug or connector in an

easily accessible place.

11. It is recommended to evaluate the

electromagnetic environment before using the

equipment.

12. Do not use near strong radiation sources

(such as unshielded RF sources), otherwise the

normal operation of device may be interfered.

13. The waste LED bulbs belong to the

hazardous wastes specified in the National

Hazardous Waste List and should be disposed by

qualified institutions.

14. No contraindications for this product.

15. Any parts that can only be inspected or

supplied by the manufacturer and replaced or

repaired by the manufacturer's designated

personnel.

16. Failure to use the equipment in accordance

with the manufacturer's instructions may result in

damage to the equipment.

2. Maintenance

1. Wipe the lens gently with a soft tissue. Carefully wipe off the oil marks and fingerprints

on the lens surfaces with a tissue moistened with a small amount of 3:7 mixture of alcohol and

ether or dimethylbenzene.

★As the alcohol and ether is flammable, don’t place these chemical near to fire or fire

source. For example, when turning on or turning off the electrical device, please use these

chemical in a ventilated place.

2. Don’t use organic solution to wipe the surfaces of the other components. Please use the

neutral detergent if necessary.

3. If the microscope is damped by liquid when using, please power it off immediately and

wipe it dry.

4. Never disassemble the microscope, otherwise the performance will be affected or the

instrument will be damaged.

5. After using, cover the microscope with a dust cover.

3. Safety Sign

Sign

Signification

Study the instructions before use. Unsuitable operation would lead to

person hurt or instrument faulty.

Main switch ON

Main switch OFF

Series

1. Components

Series

Koehler Illuminator

Light Adjustment

Knob

Coarse Focusing

Knob

Fine Focusing

Knob

Focus Arm

Koehler Illuminator

Condenser

Stage

Tension

Adjustment

Ring

Objective

Body Group

Eyepiece

Binocular Head

Objective

Nosepiece

series biological microscope

Series

Koehler Illuminator

Condenser

Koehler Illuminator

Color Temperature

Knob

Power Switch

LCD Display

Coarse

Focusing Knob

Fine Focusing

Knob

Focus Arm

Stage

Objective

Nosepiece

Body Group

Gemel Binocular Head

Eyepiece

Series

Eyepiece

Gemel Binocular

Head

Fluorescent filter

Adjustment Knob

Light

Adjustment

Knob

（Reflected）

Lock screw

Koehler Illuminator

Condenser

Focus

Arm

Fine

Focusing

Knob

Koehler Illuminator

LCD Display

Power Switch

（Transmitted）

Color

Temperature

Knob

Coarse

Focusing

Knob

series biological microscope（with LED fluorescence device）

LED Fluorescence

Illuminator

Light Shield

Stage

Body

Group

Objective

Nosepiece

Objective

Lock screw

Series

Power Cord

Objective

Nosepiece

Body

Group

Stage

Focus Arm

External

Power Socket

Coarse

Focusing

Knob

Light Adjustment

Knob（Transmitted）

Fine

Focusing

Knob

Koehler Illuminator

Eyepiece

Gemel Binocular

Head

LED

Fluorescence

Illuminator

Tension

Adjustment

Ring

2. Assembling

Series

2-1 Assembling Scheme

Following is the Assembling Scheme, and the numbers denote the assembling order.

★Before assembling, make sure there is no dust, dirt or other materials which will

disturb it.Assemble carefully and do not scrap any part or touch the glass surface.

Series

2-2 Assembling Steps

Fig.4

2-2-1 Assemble the Koehler Illuminator

Condenser

(1) Rotate the coarse focusing knob① to raise

the stage to the highest position (see Fig. 4).

(2) Rotate the condenser up-down knob② to

lower the bracket of condenser to the suitable

position.

(3) Fully loosen the condenser lock-screw③.

(4) Align the orientation screw at the back of

condenser with the groove of condenser base,

and push the condenser to the innermost of the

condenser base.

(5) Tighten the lock-screw③ of condenser, then

raise the condenser with the up-down knob② to

the highest position.

Fig.5

Fig.6

2-2-2 Assemble the Objective

1. Rotate the coarse focusing knob① to lower

the stage to a suitable position (see Fig. 5).

2. When installing the objectives, install the 4X,

10X, 20X, 40X, 100X objective matching with

the nosepiece hole 1, 2, 3, 4, 5 (see Fig. 6).

★When operating, first use the low

magnification objective (4X or 10X) to search

for specimen and focus, and then replace with

high magnification objective to observe.

★ When replacing the objective, rotate the

objective nosepiece until it sounds “ka-da”, to

make sure the objective wanted is in the

center of optical path.

3. The objective nosepiece has memory function,

which can automatically memorize the brightness

value saved by the objectives of each

magnification.

When the nosepiece is rotated clockwise or

counterclockwise but does not enter the next

objective position, the brightness value and

magnification display remain unchanged. After

entering the new objective magnification position,

the brightness value is displayed as the value

previously saved by the magnification objective,

and the objective magnification display is

updated to the current objective magnification.

Table of contents

Other OPTO-EDU Microscope manuals

OPTO-EDU

OPTO-EDU A15.2604 User manual

OPTO-EDU

OPTO-EDU A22.1201 User manual

OPTO-EDU

OPTO-EDU A23.3645 Series User manual

OPTO-EDU

OPTO-EDU A16.2601-L User manual

OPTO-EDU

OPTO-EDU A15.1016 User manual

OPTO-EDU

OPTO-EDU XD Series User manual

OPTO-EDU

OPTO-EDU A11.1303 Series User manual

OPTO-EDU

OPTO-EDU A11.2601 User manual

OPTO-EDU

OPTO-EDU A18.1828 User manual

OPTO-EDU

OPTO-EDU A22.1504 Series User manual

OPTO-EDU

OPTO-EDU A12.1095 User manual

OPTO-EDU

OPTO-EDU A12.1061 User manual

OPTO-EDU

OPTO-EDU A15.1091 User manual

OPTO-EDU

OPTO-EDU A41.1903 User manual

OPTO-EDU

OPTO-EDU A15.2601-T User manual

OPTO-EDU

OPTO-EDU A63.7015 User manual

OPTO-EDU

OPTO-EDU A10.1018 User manual

OPTO-EDU

OPTO-EDU A11.1323 User manual

OPTO-EDU

OPTO-EDU A11.1007 User manual

OPTO-EDU

OPTO-EDU A17.1091 User manual

OPTO-EDU

OPTO-EDU A23.0910 User manual

OPTO-EDU

OPTO-EDU A23.1502 Series User manual

OPTO-EDU

OPTO-EDU A12.1010 User manual

OPTO-EDU

OPTO-EDU A33.5121 User manual

Popular Microscope manuals by other brands

Thermo Scientific

Thermo Scientific Nicolet iN10 Using

National

National DC3-163 instructions

KERN Optics

KERN Optics OPE-1 User instructions

OPTIKA MICROSCOPES

OPTIKA MICROSCOPES B-150D Operation manual

Prior

Prior Lux POL operating instructions

Opitec

Opitec Smartscoop 115615 instructions

KERN

KERN OPO-1 operating instructions

Topcon

Topcon SP-1P user manual

Motic

Motic PA43 Operation manual

Leica

Leica DVM5000 Setup manual

MshOt

MshOt MZ62 user manual

KERN Optics

KERN Optics OZR-5 User instructions

VWR

VWR VisiScope 384 Series instruction manual

Nikon

Nikon ECLIPSE E200 POL instructions

Leica

Leica DI C800 User's manual & installation instructions

ThermoFisher Scientific

ThermoFisher Scientific Continuµm manual

ThermoFisher Scientific

ThermoFisher Scientific Continuµm manual

Olympus

Olympus SZ61 instructions