Optika B-150D-MRPL Mounting instructions
Version: 2 2019
Model
B-150D-MRPL
B-150D-BRPL
B-190TB
B-290TB
SOFTWARE SETUP
Page 2
Table of Contents
1. Software installation 3
1.1 B-190TB / B-290TB 3
1.2 B-150D series 3
2. Using the camera 3
2.1 Run the Software 3
2.2 Using the Software 3
2.3 Setting camera parameters 4
Page 3
1. Software installation
1.1 B-190TB / B-290TB
No software installation is required.
Software is pre-installed before the shipment from the factory.
1.2 B-150D series
The camera is driven by the PROVIEW software.
PROVIEW can be downloaded from the site:
http://www.optikamicroscopes.com/optikamicroscopes/optika-support/download-drivers-softwares/
You will have to register to download the Optikaproview.zip le.
Once the le has been downloaded, you will have unzip it and run the setup.exe le.
At the end of the installation it is possible to start the Software.
• NOTE: no driver installation is required for the cameras. The installation of the Software automatical-
ly installs all the needed drivers for the correct operation of the camera.
2. Using the camera
2.1 Run the Software
1. Double click on the PROVIEW icon on the desktop.
2.2 Using the Software
1. The Software main screen appears:
Page 4
2. In the Camera List section select the available camera named Camera-X3N.
3. Live image starts.
2.3 Setting camera parameters
The Software user manual is available in PDF format within the Software itself and can be opened using the F1
function key.
You must have Acrobat Reader installed to view the manual.
The manual contains all the operating instructions for using the camera and for the various functions of the Sof-
tware.
Only some initial setting has to be done using this camera in order to have a proper white balance:
1. While observing the live image, move the slide to an empty zone (no specimen is visible).
2. Now in the White Balance section activate the checkbox Auto White Balance.
Page 5
3. Live image changes accordingly.
4. Deselect the checkbox Auto White Balance. In this way the white balance will be kept by the system,
unless the user changes the light intensity or some parameter in the microscope.
• NOTE: if the checkbox Auto White Balance is always selected, the system will change the white
balance setting according to the specimen, creating false colors in the image.
5. Set the exposure time in the Exposure & Gain section.
6. User can activate the checkbox Auto Exposure or use the Manual exposure.
OPTIKA S.r.l.
Via Rigla, 30 - 24010 Ponteranica (BG) - ITALY Tel.: +39 035.571.392
info@optikamicroscopes.com - www.optikamicroscopes.com
OPTIKA
Spain
spain@optikamicroscopes.com
OPTIKA
USA
usa@optikamicroscopes.com
OPTIKA
China
china@optikamicroscopes.com
OPTIKA
India
india@optikamicroscopes.com
OPTIKA
Central America
camerica@optikamicroscopes.com
®
®
®
®
®
®
Page 6
7. To have a fine tuning of the exposure time, user can use the settings in the Color Adjustment section by
changing the setting of the Brightness or Contrast sliders.
8. Once these settings have been performed, system is ready to be used.
9. Now the user can refer to the complete instruction manual for all the other relevant informations.
OPTIKA S.r.l.
Via Rigla, 30 - 24010 Ponteranica (BG) - ITALY Tel.: +39 035.571.392
OPTIKA
Spain
OPTIKA
USA
OPTIKA
China
OPTIKA
India
OPTIKA
Central America
®
®
®
®
®
®
Versione: 2 2019
Modello
B-150D-MRPL
B-150D-BRPL
B-190TB
B-290TB
SET-UP DEL SOFTWARE
Page 9
Sommario
1. Installazione del Software 10
1.1 B-190TB / B-290TB 10
1.2 Serie B-150D 10
2. Uso della telecamera 10
2.1 Avviare il Software 10
2.2 Uso del Software 10
2.3 Impostare i parametri della telecamera 11
Page 10
1. Installazione del Software
1.1 B-190TB / B-290TB
Non è necessaria l’installazione di nessun software.
Il software è pre-installato prima della spedizione dalla fabbrica.
1.2 Serie B-150D
La telecamera viene comandata del software PROVIEW.
PROVIEW può essere scaricato dal sito:
http://www.optikamicroscopes.com/optikamicroscopes/optika-support/download-drivers-softwares/
Si dovrà provvedere alla registrazione per poter scaricare il le Optikaproview.zip.
Dopo avere scaricato il le si deve scompattare e poi eseguire il le setup.exe.
Alla ne dell’installazione è possibile avviare il software.
• NOTA: non è richiesta l’installazione di nessun driver per le telecamere. L’installazione del Software
installa automaticamente tutti i driver necessari al corretto funzionamento della telecamera.
2. Uso della telecamera
2.1 Avviare il Software
1. Fare doppio click sull’icona PROVIEW sul desktop.
2.2 Uso del Software
1. Appare la schermata principale del Software:
This manual suits for next models
3
Table of contents
Languages:
Other Optika Microscope manuals
Optika
Optika B-60 Series User manual
Optika
Optika B-500POL User manual
Optika
Optika B-1000 MET User manual
Optika
Optika B-810 Series User manual
Optika
Optika B-1000Ti-2 User manual
Optika
Optika SZM-LED1 User manual
Optika
Optika B-1000 POL User manual
Optika
Optika B-50 User manual
Optika
Optika B-1000FL HBO User manual
Optika
Optika B-500 MET User manual
Optika
Optika OPTIStar OS-SZ1 User manual
Optika
Optika B-500TiFL User manual
Optika
Optika IM Series User manual
Optika
Optika OPTIGEM User manual
Optika
Optika ST-50Led User manual
Optika
Optika B-190 User manual
Optika
Optika XZ-2 User manual
Optika
Optika IM Series User manual
Optika
Optika B-383LD1 User manual
Optika
Optika B-510 Series User manual
Popular Microscope manuals by other brands
VWR
VWR VisiScope 384 Series instruction manual
Nikon
Nikon ECLIPSE E200 POL instructions
Leica
Leica DI C800 User's manual & installation instructions
ThermoFisher Scientific
ThermoFisher Scientific Continuµm manual
ThermoFisher Scientific
ThermoFisher Scientific Continuµm manual
Olympus
Olympus SZ61 instructions