OPTI-UPS Inverter Series User manual

www.opti-ups.com

Inverter Series

User Manual

IS1100LT/ IS2200LT/ IS3000LT/ IS5000LT

IS2000LR/ IS2700LR/ IS4000LR/ IS5000LR

1100VA ~ 5000VA

IMPORTANT SAFETY INSTRUCTIONS

●When replacing the batteries, use the same number and the same type of batteries.

●Do not dispose of batteries in a fire; the battery may explode.

●Do not open or mutilate the battery or batteries, released electrolyte is harmful to the skin

and eyes.

●A battery can present a risk of electric shock and high short circuit current. The following

precaution should be observed when working on batteries.

* Remove watches, rings or other metal objects.

* Use tools with insulated handles.

●To prevent an overbalance of this unit, with the installation the additional stabilizer are to

mount at the bottom side.

●This unit should be installed by service personnel.

●The equipment can be operated by any individuals with no previous experience.

●“The socket-outlet shall be installed near the equipment and easily accessible.”

●“With the installation of this equipment it should be prevented, that the sum of the leakage

current of the INVERTER AND UPS at the connected consumer does not exceed 3.5mA.”

●Attention: hazardous through electric shock. Also, with disconnection of this unit from the

main, hazardous voltage still may be accessible through supply of battery.

●The battery supply should be therefore disconnected in the plus and minus pole through or

from the outer enclosure accessible battery fuses when maintenance or service work

inside the INVERTER AND UPS is considered.

●The lead acid battery may cause chemical hazard.

●The battery presents a risk of electric shock and energy hazard.

●Batteries will be disposed by the manufacturer or importer. Customers need to send

them back with no charge for disposal.

German wording:

●Wenn Sie die Batterien austauschen, verwenden Sie bitte die gleiche Anzahl und den

gleichen Batterietyp.

●Werfen Sie niemals die Batterien in das Feuer, die Batterien könnten explodieren.

●Öffnen oder beschädigen Sie nicht die Batterien, ausfileβendes Elektrolyt ist schädlich für

Haut und Augen.

●Eine Batterie kann eine Gefahz eines elektrischer Schlages und sehr groβer

Kurzschluβströme beinhalten. Folgenda Vorkehrungen soiiten getroffen warden, wenn Sie

mit der Battery arbeiten.

* Entfernen Sie Uhren, Ring and andere metallische Objekte.

* Verwenden Sie Werkzeug mit isolierten Griffen.

●Um ein Umkippen dieses Gerätes zu verhindern, sind mit der Installation dieses Gerätes

die zugätalichen Stützen an der Unterseite dieses Gerätes anzubringen.

●Dieses Gerät ist durch Elektrofachkräfte zu installieren.

●Bedienung durch jedermann ohne dem Vorkenntnisse.

●“Die Steckdose muβnahe dem Gerät angebracht und leicht zugänglich sein.”

●“Bei der Installation dieses Gerätes ist darauf zu achten, daβdie Summe der Ableitstöme

der USV und der angeschlossenen Verbraucher den Maximalwert von 3.5mA nicht

Überschreiten.”

●“Vorsicht, Gefahr durch elektrischen Schlag. Auch nach Trennung von der

Netzeingangsspannung werde Teile innerhalb der USV von der Batterie gespeist und

führen gefährliche Spannung.

●Bei Instandhaltungsarbeiten ist daher die Versorgung durch die Batterie an den von auβen

zugänglichen Sicherungshaltern in beiden Polen zu unterbrechen.”

●Die Blei-Akkumulatoren Können bei unsachgemäβer Handhabung chemische Gefahren

hervorrufen.

●Die Batterie birgt eine Gefahr eines elektrischen Schlages und sehr hoher

Kurzschluβstroeme.

●Batterien werden durch den Hersteller oder Importeur entsorgt. Dazu muessen die

Batterien kostenfrei angeliefert werden.

CAUTION:

● The inverter and UPS connection instructions and operation described in the manual must be

followed in the indicated order.

● INVERTER AND UPS must be connected to a near by wall outlet that is easily accessible.

The INVERTER AND UPS can be disconnected from the AC-power source by removing the

power cord.

● Check that the indications on the rating plate correspond to your AC-power system and to the

actual electrical consumption of all the equipment to be connected to the INVERTER AND

UPS.

● Never install the INVERTER AND UPS near liquids or in an excessively damp environment.

● Never let a foreign body penetrate inside the INVERTER AND UPS.

● Never block the ventilation grates of the INVERTER AND UPS.

● Never expose the INVERTER AND UPS to direct sunlight or source of heat.

● If the INVERTER AND UPS must be stored prior to installation, storage must be in a dry place.

● The admissible storage temperature range is -15℃to +55℃.

● All handling operations will require at least two people (unpacking, installation in rack systems).

● Once installed and connected to the AC power source for the first time, the battery will start to

charge. Full charging to obtain the rated battery backup time requires at least 8 hours.

● Before and after the installation, if the UPS remains de-energized for a long period, the UPS

must be energized for a period of 24 hours, at least once every 6 months (for a normal storage

temperature less than 25℃. This charges the battery, thus avoiding possible irreversible

damage. During the replacement of the battery module, it is imperative to use the same type

and number of element previously mounted in the UPS, in order to maintain an identical level

of performance and safety. In case of doubt, don’t hesitate to contact our after sales

department.

● Never apply the UPS as an Inverter.

Special Symbols

The following are examples of symbols used on the INVERTER AND UPS to alert you the

important information.

RISK OF ELECTRIC SHOCK -

Indicates that a risk of electric shock is present and the associated warning

should be observed

CAUTION; REFER TO OPERATOR’S MANUAL -

Refer to your operator’s manual for additional information, such as important

operating and maintenance.

SAFETY EARTHING TERMINAL -

Indicates the primary safety ground.

RJ-45 RECEPTACLE -

For 230V units only, this receptacle provides network interface connections.

Do not plug telephone or telecommunications equipment into this receptacle.

This symbol indicates that you should not discard the INVERTER AND

UPS AND the UPS batteries in the trash. The UPS may contain sealed,

lead-acid batteries. Batteries must be recycled.

TABLE of CONTENTS

1. Over view and Features --------------------------------------------------------------------- Page 6

2. Presentation ------------------------------------------------------------------------------------- Page 7

2.1 LED display models ----------------------------------------------------------------------------- Page 7

2.2 LCD display models ---------------------------------------------------------------------------- Page 8

2.3 Panels ---------------------------------------------------------------------------------------------- Page 9

3. Installation --------------------------------------------------------------------------------------- Page 12

4. Operation ----------------------------------------------------------------------------------------- Page 13

5. Indication and Control ----------------------------------------------------------------------- Page 17

5.1 LED Display --------------------------------------------------------------------------------------- Page 17

5.2 LCD Display --------------------------------------------------------------------------------------- Page 17

5.3 Audible alarm -------------------------------------------------------------------------------------

Page 19

5.4 Auto self-test Function ------------------------------------------------------------------------- Page 19

5.5 Remote Control ---------------------------------------------------------------------------------- Page 20

5.6 Reset the INVERTER AND UPS ----------------------------------------------------------- Page 20

6. Communication interface ------------------------------------------------------------------ Page 21

7. Trouble shooting ------------------------------------------------------------------------------ Page 22

8. Specifications ---------------------------------------------------------------------------------- Page 23

8.1 IS-LT Long-Run Series (Tower) 1100VA~5000VA --------------------------- Page 23

8.2 IS-LR Long-Run Series (Rack) 2000VA~5000VA ---------------------------- Page 26

1. OVER VIEW AND FEATURES

The series INVERTER AND UPS is an advanced Line-Interactive Uninterruptible Power System

which produces pure sine wave power to your equipment; unlike the traditional off-line UPS, the

series provides very short transference when blackouts happen, and zero transference from AC

mode to battery mode and vice versa. The voltage regulation of the series is similar to an On-line

UPS; however, the series provides efficiency over 96% under normal power condition. Two charge

modes, quick charge and trickle charge, are provided to maintain the batteries in the best condition.

With outstanding performance and reliability, the unique benefits of the UPS include the following:

＊ Pure sine wave output.

＊ Microprocessor based design with true Line-Interactive structure.

＊ Adjustable voltage sensitivity, charging voltage, & voltage-transfer points.

＊ Remaining Estimated Backup Time indication (EBT system on LCD version).

＊ Smart battery management with intelligent double stages of charging control.

＊ Real time auto-detection for battery condition.

＊ Automatic restart of load after UPS shutdown.

＊ Smart AVR function (Two buck / boost modes).

＊ Zero Transference.

＊ Generator compatible.

＊ “Green Power” design with auto on/off function & adjustable level.

＊ Hot-swappable batteries (Rack version/optional).

＊ Network manageable (SNMP optional).

＊ RS-232 interface for communication, compatible with all major O.S., including Windows, Linux,

SCO UNIX, & DOS.

＊ Protection for overload, short circuit, & over heat.

2. PRESENTATION

2.1 LED display models (for IS-LT LED series)

There are many types of LED display for different models; however, they all use the same control

method, the following are two examples:

Front panel Example 1

Front panel Example 2

LEDs of battery voltage level and load level.

LED of operation status.

Control button.

2.2 LCD display models (for IS-LT LCD series)

The following is one example of LCD display; the location of control buttons could be different for

some models; however, the functions of buttons are the same.

Main control button.

LCD screen.

Selection button for mode & value.

2.3 Panels

A -1. Tower models (for Standard IS1100LT, IS2200LT & IS3000LT)

Rear Panel

1. RS-232 Interface port

2. Outlets (NEMA or IEC)

3. Data-line protection (RJ-45, Optional)

4. Inlet of city power

5. Fuse (some models apply circuit breaker)

6. Battery connector (for Long-run models only, optional for Anderson’s type)

7. USB port (Optional)

8. Internal SNMP Slot (Optional)

This manual suits for next models

Table of contents

Other OPTI-UPS UPS manuals

OPTI-UPS

OPTI-UPS RS650B User manual

OPTI-UPS

OPTI-UPS On Line UPS Series DS10KB-RM User manual

OPTI-UPS

OPTI-UPS Gaming Series GS1100B User manual

OPTI-UPS

OPTI-UPS VS375C User manual

OPTI-UPS

OPTI-UPS Gaming Series GS1100B User manual

OPTI-UPS

OPTI-UPS Excalibur 5000AL User manual

OPTI-UPS

OPTI-UPS DS1000B User manual

OPTI-UPS

OPTI-UPS IS1100NR User manual

OPTI-UPS

OPTI-UPS 280ES User manual

OPTI-UPS

OPTI-UPS PS650D User manual

OPTI-UPS

OPTI-UPS Power PS500C User manual

OPTI-UPS

OPTI-UPS EL3000-AL User manual

OPTI-UPS

OPTI-UPS Power PS1000C User manual

OPTI-UPS

OPTI-UPS On Line UPS Series DS1000B-RM User manual

OPTI-UPS

OPTI-UPS DS1000B User manual

OPTI-UPS

OPTI-UPS ES1000C-RM User manual

OPTI-UPS

OPTI-UPS Standby UPS System User manual

OPTI-UPS

OPTI-UPS CS500B User manual

OPTI-UPS

OPTI-UPS On Line UPS Series DS100KC33 User manual

OPTI-UPS

OPTI-UPS DC12V User manual

OPTI-UPS

OPTI-UPS On Line UPS Series DS10000B User manual

OPTI-UPS

OPTI-UPS Fighter Series FS600 / FS600B User manual

OPTI-UPS

OPTI-UPS High-Frequency Online UPS DS1000E User manual

OPTI-UPS

OPTI-UPS Power Series User manual

Popular UPS manuals by other brands

Pylontech

Pylontech Victron & Pylontech US5000 manual

Tecnoware

Tecnoware EVO DSP PLUS MM 6.8 user manual

Mecer

Mecer ME-1000-WTU user manual

Mustek

Mustek PowerMust 530(B) Plus Startup manual

Emerson

Emerson Liebert NXL series Operation and maintenance manual

MAKELSAN

MAKELSAN BOXER SERIES user manual

Block

Block PC-0524-400-0 manual

CyberPower

CyberPower CP585LCD user manual

Eaton

Eaton 3S Advanced user's guide

CyberPower

CyberPower Office Tower Series UPS 1000 user manual

CyberPower

CyberPower BM100 quick start guide

Best Power

Best Power 610 quick start guide

Best Power

Best Power Unity/I UT3K user manual

Mustek

Mustek PowerMust 400 Offline user manual

Xantrex

Xantrex Trace 512 UR-UPS owner's manual

Forza

Forza SL-1501UL user manual

LEGRAND

LEGRAND keor 310081 quick start guide

ABB

ABB Conceptpower DPA 500 operating manual