OPTI-UPS PS650D User manual

www.opti-ups.com

USER MANUAL

PS-D Line interactive UPS

PS650D / PS1000D / PS1500D / PS2000D

PS1000D-RM / PS1500D-RM

PS1000D-RT / PS1500D-RT / PS2000D-RT

PS3000D-RT / PS5000D-RT / PS7500D-RT / PS10000D-RT

PS3000DL / PS5000DL / PS7500DL

Uninterruptible Power Supply

CONTENTS

1. INTRODUCTION .............................................……........ 2

2. SAFTY INSTRUCTION...................……...…………….... 3

3. SYSTEM DESCRIPTION..........................……......…..... 7

4. OUTLINE DESCRIPTION..............................……......... 9

5. CABLE CONNECTION...................……...……………..... 22

6. OPERATION ................................................……........... 23

7. TROUBLE SHOOTING GUIDE.......................…….....… 28

8. OPERATION MODES OF THE UPS ..............……........ 30

9. COMPUTER INTERFACE ...........................……........... 32

10. SPECIFICATIONS…………………........…………..…..... 33

1. INTRODUCTION

1.1 General Description

The continuity of electrical power is an essential requirement for critical load

operations. The Uninterruptible Power System (UPS) is designed to meet the

user‘s need of present computer, server and the equipment of office automation

that make the UPS more compact and less noisy.

To choose the UPS as your equipment protector is a wise investment because it

supplies reliable, pure and stable power at affordable price.

1.2 Key features

zLine-interactive Sine-wave Topology

zIntelligent Charger w/PFC

zDetachable Dot-Matrix LCD Panel ( 1K and above)

zCompact Size

zRack/Tower Convertible ( 3K and above)

zIntelligent Fan Speed Control

zIntegrate with Generator Set

zHot Swappable Battery ( Rack model)

zMultiple Interface Options ( 1K and above)

zCold Start

1.3 Important Notices

To be sure that the UPS will be operated correctly, the following items should be

noticed:

1. Read instructions carefully before operating the UPS.

2. UPS power connect instruction should be followed.

3. Please don‘t open the case to prevent danger.

4. If the UPS will be stored for long period, the battery must be charged once

every 60 days.

5. Retain the load within the rating of UPS to prevent faults.

6. Handle unusual events according to the trouble-shooting guide.

7. Keep the UPS clean and dry.

2. SAFTY INSTRUCTION

2.1 Transporting

1. Disconnect all power cables if necessary.

2. Be careful not to damage the UPS while transporting.

3. Don‘t move the UPS upside down.

4. Please transport the UPS system only in the original packaging (to protect

against shock and impact).

2.2 Positioning

1. Do not put the UPS on rugged or declined surface.

2. Do not install the UPS system near water or in damp environments.

3. Do not install the UPS system where it would be exposed to direct sunlight or

near heat.

4. Do not block off ventilation openings in the UPS system’s housing and don’t

leave objects on the top of the UPS.

5. Allow a minimum distance of 10 cm in the rear and two sides of the UPS for

ventilation.

6. Keep the UPS far away from heat emitting sources.

7. Do not expose it to corrosive gas.

8. Ambient temperature : 0℃- 40℃

2.3 Installation

1. Connect the UPS system only to an earthed shockproof socket outlet.

2. Do not connect domestic appliances such as hair dryers or office equipment

which would overload the UPS system (e.g. laser printers) to UPS output

sockets.

3. Place cables in such a way that no one can step on or trip over them.

2.4 Operation

1. Do not disconnect the mains cable on the UPS system or the building wiring

socket outlet during operations since this would cancel the protective earthing of

the UPS system and of all connected loads.

2. The UPS has its own internal power source (batteries). The output terminals

may be live even when the UPS is not connected to the AC supply.

3. Ensure that no fluids or other foreign objects can enter the UPS system.

2.5 Maintenance and Service

1. Caution - risk of electric shock.

Even after the unit is disconnected from the mains power supply (building wiring

socket outlet), components inside the UPS system are still connected to the

battery and are still electrically live and dangerous. Before carrying out any kind

of servicing and/or maintenance, disconnect the batteries and verify that no

current is present.

2. Only persons adequately familiar with batteries and with the required

precautionary measures may exchange batteries and supervise operations.

Unauthorized persons must be kept well away from the batteries.

3. Batteries may cause electric shock and have a high short-circuit current. Please

take the precautionary measures specified below and any other measures

necessary when working with batteries:

- remove wristwatches, rings and other metal objects

- use only tools with insulated grips and handles.

4. When changing batteries, install the same number and same type of batteries.

5. Do not attempt to dispose of batteries by burning them. This could cause battery

explosion.

6. Do not open or destroy batteries. Escaping electrolyte can cause injury to the

skin and eyes.

3. SYSTEM DESCRIPTION

3.1 Front Panel Description for LCD Model

1. LCD Display: This indicates the UPS operation information, including UPS

status, input/output voltage, input/output frequency, battery voltage, battery

capacity left, output load, inside temperature, and the times of history events.

2. Up-key: Use to select upward the UPS status on LCD Display.

3. Down-key: Use to select downward the UPS status on LCD Display. In battery

operation mode, press it with Up-key at the same time to disable the buzzer.

4. Enter-Key: It is pressed with the Down-key to turn on the UPS, with the Up-key

to turn off the UPS. Beside, it is pressed to confirm and enter the item selected.

5. Fault LED (red): To indicate the UPS is in fault condition because of inverter

shutdown or over-temperature.

6. Warning LED (yellow): To indicate the UPS is in the status of overload, bypass

and battery back-up.

7. Normal LED (green): To indicate the UPS is operating normally.

8. ON/TEST/MUTE key: It should be pressed with the control key simultaneously

to switch on UPS, do UPS auto-test in normal AC mode and turn off the buzzer

in battery operation.

4. OUTLINE DESCRIPTION

4.1 Case Outline

PS650D

PS1000D / PS1500D / PS2000D

PS1000D-RT / PS1500D-RT / PS2000D-RT (2U)

PS3000D-RT / PS3000DL Rack & Tower Convertible Unit (3U)

PS5000D-RT Rack & Tower Convertible Unit (3U)

PS7500D-RT / PS10000D-RT / PS5000DL / PS7500DL Rack & Tower

Convertible Unit (3U)

4.2 Back View Description

PS650D

1. USB Interface Port 4. Output Socket (NEMA 5-15R

or IEC320)

2. Remote Control (optional) 5. Breaker

3. RJ11 Surge Protection (optional) 6. Input Socket

PS1000D / PS1500D / PS2000D

1. RS-232 Interface Port 5. Output Socket

2. Intelligent Slot (SNMP, optional) 6. External Battery Socket ( L )

3. RJ11 Surge Protection 7. Breaker

4. Remote Control 8. Input Socket

PS1000D-RM / PS1500D-RM (1U)

1. RS-232 Interface Port 4. Output Socket (NEMA 5-15R or

IEC320)

2. Intelligent Slot (SNMP, optional) 5. Breaker

3. Remote Control (optional) 6. Input Socket

PS1000D-RT / PS1500D-RT / PS2000D-RT (2U)

1. RS-232 Interface Port 6. Fan

2. Intelligent Slot (SNMP, optional) 7. External Battery Socket ( L )

3. RJ11 Surge Protection 8. Breaker

4. Remote Control (optional) 9. Input Socket

5. Output Socket (NEMA 5-15R or IEC320)

PS3000D-RT / PS3000DL Convertible Unit (3U)

1. RS-232 Interface Port 6. Fan

2. Intelligent Slot (SNMP, optional) 7. External Battery Socket ( L )

3. RJ11 Surge Protection 8. Breaker

4. Remote Control (optional) 9. Input Socket

5. Output Socket (NEMA 5-15R or IEC320)

This manual suits for next models

Table of contents

Other OPTI-UPS UPS manuals

OPTI-UPS

OPTI-UPS Fighter Series FS600 / FS600B User manual

OPTI-UPS

OPTI-UPS ES1000C-RM User manual

OPTI-UPS

OPTI-UPS Thunder Shield TS1250W User manual

OPTI-UPS

OPTI-UPS On Line UPS Series DS100KC33 User manual

OPTI-UPS

OPTI-UPS DS10KB31 User manual

OPTI-UPS

OPTI-UPS DS-D33 User manual

OPTI-UPS

OPTI-UPS Line Interactive UPS Series PS1000B-RM User manual

OPTI-UPS

OPTI-UPS VS375C User manual

OPTI-UPS

OPTI-UPS On Line UPS Series DS10KB-RM User manual

OPTI-UPS

OPTI-UPS Green Power Series Master / Slave User manual

OPTI-UPS

OPTI-UPS Inverter Series IS1100LT User manual

OPTI-UPS

OPTI-UPS Power PS1000C User manual

OPTI-UPS

OPTI-UPS Clever Series CS385B User manual

OPTI-UPS

OPTI-UPS RS650B User manual

OPTI-UPS

OPTI-UPS DS1000B User manual

OPTI-UPS

OPTI-UPS Power Series User manual

OPTI-UPS

OPTI-UPS Stabilizer Series SS10000 User manual

OPTI-UPS

OPTI-UPS DS-C33 Series User manual

OPTI-UPS

OPTI-UPS DS-D33 User manual

OPTI-UPS

OPTI-UPS On Line UPS Series DS10000B User manual

OPTI-UPS

OPTI-UPS Gaming Series GS1100B User manual

OPTI-UPS

OPTI-UPS Excalibur 5000AL User manual

OPTI-UPS

OPTI-UPS Line Interactive UPS Series CS500B User manual

OPTI-UPS

OPTI-UPS ES550C User manual

Popular UPS manuals by other brands

Pylontech

Pylontech Victron & Pylontech US5000 manual

Tecnoware

Tecnoware EVO DSP PLUS MM 6.8 user manual

Mecer

Mecer ME-1000-WTU user manual

Mustek

Mustek PowerMust 530(B) Plus Startup manual

Emerson

Emerson Liebert NXL series Operation and maintenance manual

MAKELSAN

MAKELSAN BOXER SERIES user manual

Block

Block PC-0524-400-0 manual

CyberPower

CyberPower CP585LCD user manual

Eaton

Eaton 3S Advanced user's guide

CyberPower

CyberPower Office Tower Series UPS 1000 user manual

CyberPower

CyberPower BM100 quick start guide

Best Power

Best Power 610 quick start guide

Best Power

Best Power Unity/I UT3K user manual

Mustek

Mustek PowerMust 400 Offline user manual

Xantrex

Xantrex Trace 512 UR-UPS owner's manual

Forza

Forza SL-1501UL user manual

LEGRAND

LEGRAND keor 310081 quick start guide

ABB

ABB Conceptpower DPA 500 operating manual