Olympus PT-037 User manual

PT-037 Instruction Manual

Printed in China

http://www.olympus.com/

VS018603

PT-037

SP-550UZ/SP-560UZ

PT-037_1-4.fm 1 ページ２００７年８月６日　月曜日　午前１０時４０分

EN 2

Introduction

zUnauthorized copying of this manual in part or in full, except for private

use, is prohibited. Unauthorized reproduction is strictly prohibited.

zOLYMPUS IMAGING CORP. shall not be responsible in any way for lost

profits or any claims by third parties in case of any damage occurring

from improper use of this product.

zOLYMPUS IMAGING CORP. shall not be responsible for damage, lost

profits, etc. caused by loss of image data because of defects,

disassembly, repair or modification of this product by people other than

third parties specified by OLYMPUS IMAGING CORP. or for other

reasons.

Please read the following items before use

This Case is a precision device designed for use at a water depth within

40 m. Please handle it with sufficient care.

zPlease use the Case correctly after sufficient understanding of the

contents of this manual in regard to handling of the Case, checks before

use, maintenance, and storage after use.

zOLYMPUS IMAGING CORP. shall in no way be responsible for

accidents involving immersion of a digital camera in water.

In addition, expenses incurred for damage of internal materials or loss

of recorded contents due to water entering the camera will not be

compensated.

zOLYMPUS IMAGING CORP. shall not pay any compensation for

accidents (injuries or material damage) at the time of use.

zBefore use, be sure to read the precautions printed on the package.

Thank you for buying the Underwater Case PT-037.

Please read this instruction manual carefully and use the product

safely and correctly. Please keep this instruction manual for

reference after reading it.

Wrong use may cause damage to the camera inside the Case due

to water leakage, and repair may not be possible.

Before use, perform an advance check as described in this manual.

The PT-037 Underwater Case is designed for SP-550UZ and

SP-560UZ. In this manual, SP-550UZ is used for all the camera

illustrations.

PT037_EN.book Page 2 Monday, August 6, 2007 10:48 AM

EN 3

For safe use

This instruction manual uses various pictographs for correct use of the

product and to prevent danger to the user and other persons as well as

property damage. These pictographs and their meanings are shown

below.

WARNING

1Keep this product out of the reach of babies, infants, and children. There

is the possibility of occurrence of the following types of accidents.

• Injury by dropping onto the body from a height.

• Injury from parts of the body getting caught in parts which open and

close.

• Swallowing of small parts. Please consult a physician immediately

if any parts have been swallowed.

• Triggering of the flash in front of the eyes may cause permanent

vision impairment etc.

2Do not store with a battery in the digital camera housed in this product.

Storage with a battery inserted may lead to leakage of the battery liquid

and fire.

3If leakage of water should occur with a camera installed in this product,

quickly remove the battery from the camera. There is the possibility of

ignition and explosion from generation of hydrogen gas.

4This product is made of resin. There is the possibility that injuries may

be caused when it becomes broken because of strong impact with a

rock or other hard objects. Please handle it with sufficient care.

5The silica gel and the grease for silicone O-rings for this product are not

edible.

WARNING

This indicates contents for which the possibility of human

death or severe injury in case of handling under disregard

of this indication can be assumed.

CAUTION

This indicates contents for which the possibility of human

injury or the possibility of material damage in case of

handling under disregard of this indication can be

assumed.

PT037_EN.book Page 3 Monday, August 6, 2007 10:48 AM

EN 4

CAUTION

1Do not disassemble or modify this product. This may cause water

leakage or trouble. In case of disassembly or modification by persons

other than those appointed by OLYMPUS IMAGING CORP. the

guarantee shall not apply.

2Do not place this product at locations with abnormally high or

abnormally low temperatures or at locations with extreme temperature

changes. The product may deteriorate.

3Opening and closing at locations with much sand, dust, or dirt may

impair the waterproof characteristic and cause water leakage. This

should be avoided.

4This product has been designed and manufactured for use at a water

depth within 40 m. Please note that diving to a depth in excess of 40 m

may cause permanent deformation or damage to the Case and the

camera inside the Case or may lead to water leakage.

5Jumping into the water with the Case in your pocket or in your hand,

throwing the Case from a boat or ship into the water, and other rough

handling may cause water leakage. Please handle with sufficient care,

when handing it over from hand to hand etc.

6If the camera on the inside should become wet because of water

leakage etc., immediately wipe off all moisture and confirm the

operation.

7Please remove the O-ring when traveling by air. Otherwise air pressure

may make it impossible to open the Case.

8For safe use of the digital camera in this product, please read the

“Instruction Manual” for the digital camera carefully.

9When sealing this product, take sufficient care that no foreign matter

gets caught at the O-ring and the contact surfaces.

Batteries

zUse only four “AA”-size alkaline batteries or four “AA”-size nickel-

hydride batteries.

zTake care that the battery electrodes do not become wet. This may

cause trouble or accidents.

zCarefully read the instruction manual for the camera about other

cautions regarding batteries.

PT037_EN.book Page 4 Monday, August 6, 2007 10:48 AM

EN 5

Setting the underwater shooting scene mode

zThe SP-550UZ/SP-560UZ camera incorporate several shooting scene

modes for underwater shooting, including wide-angle and macro modes.

Simply select the mode that’s most appropriate for the scene you are

shooting.

For details, see “5. Underwater Shooting According to the Scene

Type” (P.28) of this manual.

zFor details on mode setting, refer to the digital camera’s operation

manual.

For Prevention of Water Leakage Accidents

When water leakage occurs while this product is being used, repair of the

camera housed in this product may become impossible. Please observe

the following cautions for use.

1When sealing this product, make sure that no hairs, fibers, sand

particles or other foreign matter stick not only to the O-ring, but also to

the contact surface. Even a single hair or a single grain of sand may

cause water leakage. Please check with special care.

2The O-ring is a consumable part. Please replace it at least once a year

with a new one. Before each use, perform the proper maintenance.

3Deterioration of the O-ring will acelerate according to the use conditions

and the storage conditions. Immediately replace the O-ring with a new

one if it is damaged, cracked, or has lost its elasticity.

4During O-ring maintenance, clean the inside of the O-ring groove and

confirm the absence of dirt, dust, sand, and other foreign matter.

Examples of foreign matter sticking to the O-ring

Hair Fibers Grains of sand

PT037_EN.book Page 5 Monday, August 6, 2007 10:48 AM

EN 6

5Apply the specified silicone O-ring grease to the O-ring.

The waterproof function is not effective when the O-ring is not installed

correctly. When installing the O-ring, take care that it does not project from

the groove and that it is not twisted. Also, when sealing the Case, close the

lid after confirming that the O-ring has not come out of the groove.

7This product is an airtight construction made of plastic (polycarbonate).

When it is left for a long time in a car, on a boat, at the beach, or at other

places reaching a high temperature, or when it is subjected for a long

time to uneven external force, it may be deformed and the waterproof

function may be lost. Pay sufficient attention to temperature control.

Also do not place heavy objects onto the product during storage or

transport, and avoid unreasonable storage.

8When the O-ring contact surface is pressed strongly from the outside of

the Case, or when the Case is twisted, the waterproof function may be

lost. Take care not to exert excessive force.

9Please use the Case only after performing the advance test and the final

check.

0If you should notice drops of water or other signs of water leakage while

taking pictures, immediately stop the dive, remove any water from the

camera and the product, test according to the item “Final check”, and

confirm whether leakage has occurred or not.

Handling the Product

zUse or storage of the product at the following locations may cause

defective operation, defects, trouble, damage, fire, internal clouding, or

water leakage. This should be avoided.

• Locations reaching high temperatures such as those under direct

sunlight, in an automobile, etc.

• Locations with open fire

• Water depths in excess of 40 m

• Locations subject to vibrations

• Locations with high temperature and humidity or with severe

temperature changes

• Locations with volatile substances

zThis product is made of polycarbonate resin with excellent impact

resistance, but it may be damaged by scraping against rocks etc. It also

may break when it hits hard objects or is dropped.

zThis product is not a case to soften impacts to the camera inside the

product. When this product with a digital camera inside it is subjected to

PT037_EN.book Page 6 Monday, August 6, 2007 10:48 AM

EN 7

impacts or heavy objects are placed onto it, the digital camera may

become damaged. Please handle it with sufficient care.

zWhen the product is not used for a long time, the waterproof

performance may drop because of deterioration of the O-ring etc. Before

use, always perform the advance test and the final check.

zDo not exert excessive force on the tripod seat or accessory mount.

zWhen a flash is used while the Case is being used, shadows may

appear at the edges of the picture. This is especially notable when

taking pictures in macro mode on the wide-angle side. Please use a

flash after image confirmation.

zDo not use the following chemicals for cleaning, corrosion prevention,

prevention of fogging, repair or other purposes. When these are used for

the Case directly or indirectly (with the chemicals in vaporized state),

they may cause cracking under high pressure or other problems.

zDo not perform operations other than specified in this instruction

manual, do not remove or modify parts other than specified, and do not

use parts other than specified.

Any troubles in taking pictures or with the equipment resulting from the

above actions shall be outside the guarantee.

zOLYMPUS IMAGING CORP. shall in no way be responsible for

accidents involving immersion of a digital camera in water.

zOLYMPUS IMAGING CORP. shall not pay any compensation for

accidents (injuries or material damage) at the time of use.

Prohibited chemicals Explanation

Volatile organic solvents,

chemical detergents

Do not clean the Case with alcohol, gasoline,

thinner or other volatile organic solvents or with

chemical detergents etc. Use pure water or

lukewarm water.

Anticorrosion agent Do not use anticorrosion agents. The metal parts

use stainless steel or brass. Wash with pure water.

Commercial defogging

agents

Do not use commercial defogging agents. Always

use the specified desiccant silica gel.

Grease other than

specified silicone grease

Use only the specified silicone grease for the silicone

O-ring, as otherwise the O-ring surface may

deteriorate and water leakage may occur.

Adhesive Do not use adhesive for repairs or other purposes.

When repair is required, please contact a dealer or

a service station of OLYMPUS IMAGING CORP.

PT037_EN.book Page 7 Monday, August 6, 2007 10:48 AM

EN 8

Contents

Introduction ........................................................................... 2

Please read the following items before use .......................... 2

For safe use .......................................................................... 3

Batteries ................................................................................ 4

Setting the underwater shooting scene mode....................... 5

For Prevention of Water Leakage Accidents......................... 5

Handling the Product............................................................. 6

1. Preparations .................................................................. 10

Check the contents of the package..................................... 10

Names of the parts .............................................................. 11

Attach the diffuser. .............................................................. 13

Install the strap.................................................................... 14

Master the basic operation.................................................. 14

Holding the Case................................................................. 14

How to Press the Shutter Lever .......................................... 15

How to Switch the Shooting Mode ...................................... 15

How to Use the Zoom Lever ............................................... 15

Setting the Zoom Lever ....................................................... 16

How to Use the POWER Button.......................................... 16

How to Use the hButton ................................................. 17

2. Advance Check of the Case.......................................... 18

Advance test before use ..................................................... 18

Advance Test ...................................................................... 18

3. Install the digital camera................................................ 19

Check the digital camera..................................................... 19

Battery Confirmation ........................................................... 19

Confirmation of the Remaining Number of Pictures to be Taken

Remove the hand strap from the digital camera. ................ 19

Prepare the camera. ........................................................... 19

Applicable Digital Cameras ................................................. 19

Turn on the digital camera. ................................................. 19

Check the camera’s operation. ........................................... 20

Seal the Case...................................................................... 20

Load the digital camera....................................................... 21

Insertion of silica gel............................................................ 21

PT037_EN.book Page 8 Monday, August 6, 2007 10:48 AM

EN 9

Set the mode dial knob. .......................................................22

Make sure the camera is loaded properly............................22

Seal the Case. .....................................................................23

Attach the special balance weight (optionally available)......23

Check the operation of the loaded camera. .........................24

Confirm the shooting scene and shooting mode..................24

Mount/remove the LCD hood...............................................25

Mounting and removing the lens cap. ..................................25

Perform the final checks. .....................................................25

Visual Inspection.................................................................. 25

Final Test (Water Leakage Test) ......................................... 26

4. Taking Pictures Under Water.........................................27

How to use the hand strap ...................................................27

Using the flash .....................................................................27

Taking pictures.....................................................................27

Confirm the picture on the LCD monitor. ............................. 27

Press the shutter lever gently. ............................................. 27

Cautions when using the flash............................................. 27

5. Underwater Shooting According to the Scene Type...... 28

Underwater shooting modes ................................................28

kUnderwater Wide-Angle 1............................................... 28

lUnderwater Wide-Angle 2 .............................................. 28

HUnderwater Macro .......................................................... 28

How to select the shooting scene ........................................29

6. Handling After Shooting................................................. 30

Wipe off any waterdrop. .......................................................30

Take out the digital camera..................................................31

Wash the Case with pure water...........................................32

Dry the Case. .......................................................................32

7. Maintaining the Waterproof Function............................. 33

Remove the O-ring...............................................................33

Removal of the O-ring.......................................................... 33

Remove any sand, dirt, etc. .................................................34

Install the O-ring...................................................................35

How to Apply Grease to the O-ring ......................................35

Replace consumable parts. .................................................36

8. Appendix........................................................................ 37

Q & A on the use of the PT-037...........................................37

Specifications.......................................................................42

PT037_EN.book Page 9 Monday, August 6, 2007 10:48 AM

EN 10

1. Preparations

Check the contents of the package.

Check that all accessories are in the box.

Contact your dealer if accessories are missing or damaged.

OLYMPUS distributor list

PT-037

SP-550UZ/SP-560UZ

O-ring remover

Hand strap

Lens cap

Silica gel

Silicone grease

Instruction manual (this manual)

Case body

LCD hood

(on the body)

LCD

hood strap

Diffuser

(The O-rings are fitted in the

Case when it is shipped from

the factory.)

PT037_EN.book Page 10 Monday, August 6, 2007 10:48 AM

Table of contents

Other Olympus Camera Accessories manuals

Popular Camera Accessories manuals by other brands

Viltrox

Viltrox EF-NEX Mount instructions

Calumet

Calumet 7100 Series CK7114 operating instructions

Ropox

Ropox 4Single Series User manual and installation instructions

Cambo

Cambo Wide DS Digital Series Main operating instructions

Samsung

Samsung SHG-120 Specification sheet

Ryobi

Ryobi BPL-1820 Owner's operating manual

Aegis

Aegis ABL-36020P user manual

Pentax

Pentax Data Back Fc operating manual

Fantasea

Fantasea EyeGrabber F Series instruction manual

Honeywell

Honeywell HDZ20HD user manual

EGO

EGO BA1400T Operator's manual

Sima

Sima SRW-62 user guide

Shape

Shape A7SSMKIT Assembly manual

Slide Kamera

Slide Kamera HST-2 user manual

Power works

Power works 2902613 Original instructions

SES

SES SE-2047-2 user manual

Starlite

Starlite OctoDome nxt instructions

Custom Brackets

Custom Brackets Digital PRO-M Instructions for use