Olivetti PI-503 User manual

PI-503

Option Printer

SERVICE MANUAL

Code Y107982-5

PUBLICATION ISSUED BY:

Olivetti S.p.A.

77, Via Jervis - 10015 Ivrea (TO)

Italy

2008, Olivetti

Revision history

After publication of this service manual, the parts and mechanism may be subject to change for

improvement of their performance.

Therefore, the descriptions given in this service manual may not coincide with the actual machine.

When any change has been made to the descriptions in the service manual, a revised version will be

issued with a revision mark added as required.

Revision mark:

• To indicate clearly a section revised, is shown at the left margin of the revised section.

The number inside represents the number of times the revision has been made.

• To indicate clearly a page that contains the revision, is shown near the page number of the

corresponding page.

The number inside represents the number of times the revision has been made.

NOTE

Revision marks shown in a page are restricted only to the latest ones with the old ones deleted.

• When a page revised in Ver. 2.0 has been changed in Ver. 3.0:

The revision marks for Ver. 3.0 only are shown with those for Ver. 2.0 deleted.

• When a page revised in Ver. 2.0 has not been changed in Ver. 3.0:

The revision marks for Ver. 2.0 are left as they are.

PI-503

Outline

MaintenanceAdjustment / Setting

Troubleshooting

Field Service Ver. 2.0 Aug. 2007

CONTENTS

PI-503

Outline

1. Product specification ............................................................................................... 1

Maintenance

2. Periodical check ...................................................................................................... 3

2.1 Maintenance procedure (Periodical check parts) ................................................ 3

2.1.1 Replacing the pick-up roller /Up and the feed roller /Up ............................... 3

2.1.2 Replacing the pick-up roller /Lw and the feed roller /Lw ............................... 5

2.1.3 Replacing the separation roller /Up and the torque limiter /Up ..................... 6

2.1.4 Replacing the separation roller /Lw and the torque limiter /Lw ..................... 7

3. Other ....................................................................................................................... 8

3.1 Disassembly/Adjustment prohibited items ............................................................ 8

3.2 Disassembly/Assembly/Cleaning list (Other parts)............................................... 9

3.2.1 Disassembly/Assembly parts list................................................................... 9

3.2.2 Cleaning parts list ......................................................................................... 9

3.3 Disassembly/Assembly procedure........................................................................ 9

3.3.1 Upper cover................................................................................................... 9

3.3.2 Rear cover................................................................................................... 10

3.3.3 Operation panel cover assy ........................................................................ 10

3.3.4 Post inserter ................................................................................................ 11

3.3.5 PI drive board (PIDB).................................................................................. 12

3.3.6 PI control board (PIOB)............................................................................... 13

3.4 Cleaning procedure ............................................................................................ 13

3.4.1 Pick-up roller /Up, feed roller /Up, separationroller /Up ............................... 13

3.4.2 Pick-up roller /Lw, feed roller /Lw, separationroller /Lw ............................... 14

3.4.3 Transport roller /Up ..................................................................................... 16

3.4.4 Transport roller /Lw ..................................................................................... 16

Adjustment/Setting

4. How to use the adjustment section ....................................................................... 17

5. Utility Mode ........................................................................................................... 18

5.1 Utility Mode function tree .................................................................................... 18

5.2 User Settings ...................................................................................................... 18

5.2.1 System Settings .......................................................................................... 18

PI-503

Outline

MaintenanceAdjustment / Setting

Troubleshooting

Field Service Ver. 2.0 Aug. 2007

6. Sensor Check ....................................................................................................... 19

6.1 Check procedure ................................................................................................ 19

6.1.1 Sensor check screens ................................................................................ 19

6.1.2 Sensor check list......................................................................................... 20

7. Finisher ................................................................................................................. 21

7.1 FS-FN adjustment .............................................................................................. 21

7.1.1 Punch Resist Loop Size (PI)....................................................................... 21

7.1.2 Cover Sheet Tray Size Detection ................................................................ 21

7.1.3 Cover Sheet Feeder Adj. ............................................................................ 22

8. Mechanical adjustment ......................................................................................... 23

8.1 PI displacement adjustment (with PK-512/PK-513 installed) ............................. 23

8.2 PI tilt adjustment (with PK-512/PK-513 installed)............................................... 25

Troubleshooting

9. Jam display ........................................................................................................... 27

9.1 Misfeed display................................................................................................... 27

9.1.1 Misfeed display resetting procedure ........................................................... 27

9.2 Sensor layout...................................................................................................... 28

9.3 Solution .............................................................................................................. 28

9.3.1 Initial check items ....................................................................................... 28

9.3.2 Code: 7235 ................................................................................................. 29

9.3.3 Code: 7249 ................................................................................................. 29

9.3.4 Code: 7250 ................................................................................................. 30

9.3.5 Code: 7251 ................................................................................................. 30

10. Malfunction code................................................................................................... 31

10.1 Trouble code ....................................................................................................... 31

10.2 Solution .............................................................................................................. 32

10.2.1 C1124: Sheet feeder up/down drive failure (lower)..................................... 32

10.2.2 C1125: Sheet feeder up/down drive failure (upper) .................................... 32

10.2.3 C1126: Sheet feeder transportation drive failure ........................................ 33

10.2.4 C1132: Output OP punch driving motor malfunction .................................. 33

Field Service Ver. 2.0 Aug. 2007 1. Product specification

PI-503

Outline

1. Product specification

A. Type

B. Functions

C. Paper type

D. Machine specifications

E. Operating environment

• Conforms to the operating environment of the main body.

NOTE

• These specifications are subject to change without notice.

Name Post inserter unit

Type Torque limiter separation type seat feeding device

Auto sheet feeding

(online operation)

Feeds the sheet to finisher automatically under the instruction from the main

body.

Manual sheet feeding

(offline operation)

Feeds the sheet to finisher under the instruction from the operation panel of PI.

You can select the following 5 post processing modes:

• 1 staple/back mode

• 2 staples (flat-stapling) mode

• Punch mode (when PK-512/PK-513 is installed on finisher)

• Saddle stitching mode (when installed on FS-608)

• Tri-folding mode (when installed on FS-608)

Size Tray /Up A4/A4S, B5/B5S, A5

81/2x 11, 8 1/2x 11S, 5 1/2x 8 1/2, 7 1/4x 10 1/2S, 16K, 16KS

Custom paper (Max. 311.1 x 297 mm, Min. 182 x 139 mm)

Tray /Lw A3, B4, A4/A4S, B5/B5S, A5

8 x 13S, 8 1/4x 13S, 8 1/2x 13S, 8 1/8x 13 1/4S, 12 x 18, 11 x 17,

81/2x 14, 8 1/2x 11, 8 1/2x 11S, 5 1/2x 8 1/2, 8K, 16K, 16KS,

71/4x 10 1/2, 7 1/4x 10 1/2S

Custom paper (Max. 311.1 x 457.2 mm, Min. 182 x 139 mm)

Type Plain paper, recycle paper, color paper, special paper, coated paper,

high-quality paper

Weight 64 g/m2to 209 g/m2

Capacity Tray /Up 200 sheets (80 g/m2) or 30 mm or less in height

Tray /Lw 200 sheets (80 g/m2) or 30 mm or less in height

Power requirements DC 24 V, DC 5 V (supplied from the main body)

Max. power

consumption 30 W or less

Dimensions 511 mm (W) x 635 mm (D) x 220 mm (H)

20 inch (W) x 25 inch (D) x 8.75 inch (H)

Weight 10.5 kg (23.25 lb)

Y107982-5 Service Manual

1. Product specification Field Service Ver. 2.0 Aug. 2007

Outline

Blank Page

PI-503

Service Manual Y107982-5

Field Service Ver. 2.0 Aug. 2007 2. Periodical check

PI-503Maintenance

Maintenance

2. Periodical check

2.1 Maintenance procedure (Periodical check parts)

2.1.1 Replacing the pick-up roller /Up and the feed roller /Up

A. Periodically replaced parts/cycle

• Pick-up roller /Up: Every 200,000 prints

• Feed roller /Up: Every 100,000 prints

B. Replacing procedure

1. Remove the upper cover.

See P.9

2. Remove two C-clips [1], and then

slide two bearings [2] at the both

sides and remove the feed roller

assy /Up [3].

3. Remove the bearing [1] and remove

the actuator [2].

A07VF2C500DA

[3]

[1] [2] [1]

[2]

A07VF2C501DA

[1]

[2]

Y107982-5 Service Manual

2. Periodical check Field Service Ver. 2.0 Aug. 2007

PI-503

Maintenance

4. Remove two C-clips [1] and remove

two bearings [2].

5. Remove the C-clip [1].

6. Slide two roller shafts [2] to the

arrow-marked direction to remove

the pick-up roller /Up [3] and the feed

roller /Up [4].

NOTE

• Reinstalling the pick-up roller and

the feed roller with the blue faces of

the one-way clutches of the pick-up

roller and the feed roller face to the

front.

7. Remove the pick-up roller [1] and the

feed roller [2] from the one-way

clutches [3] and [4].

NOTE

• When reinstalling the pick-up roller

[1], be sure to insert its cutout [5]

over the protrusion [6] of the one-

way clutch [3].

• When reinstalling the feed roller [2],

be sure to insert its cutout [7] over

the protrusion [8] of the one-way

clutch [4].

8. To reinstall, reverse the order of removal.

A07VF2C502DA

[1]

[2]

A07VF2C503DA

[1][4]

[3]

[2]

A07VF2C504DA

[3]

[1]

[5][7][2]

[8] [6]

[4]

Service Manual Y107982-5

Field Service Ver. 2.0 Aug. 2007 2. Periodical check

PI-503Maintenance

2.1.2 Replacing the pick-up roller /Lw and the feed roller /Lw

A. Periodically replaced parts/cycle

• Pick-up roller /Lw: Every 200,000 prints

• Feed roller /Lw: Every 100,000 prints

B. Replacing procedure

1. Pull the release lever [1] and open

the upper door [2].

2. Take steps 2 to 7 in the replacement procedure of the pick-up roller /Up and feed roller

/Up.

See P.3

3. To reinstall, reverse the order of removal.

A07VF2C505DA

[2]

[1]

Y107982-5 Service Manual

Table of contents

Other Olivetti Printer manuals

Olivetti

Olivetti JP 883 User manual

Olivetti

Olivetti PG L2028 Special User manual

Olivetti

Olivetti d-COLOR P2026 User manual

Olivetti

Olivetti d-COLOR MF652 Operating instructions

Olivetti

Olivetti PK-516 User manual

Olivetti

Olivetti MB-502 User manual

Olivetti

Olivetti d-Color P20W User manual

Olivetti

Olivetti PG L2028 Special User manual

Olivetti

Olivetti Artjet 12 User manual

Olivetti

Olivetti d-COLOR MF222plus User manual

Olivetti

Olivetti JS-504 User manual

Olivetti

Olivetti MF22 User manual

Olivetti

Olivetti d-COLORMF3000 User manual

Olivetti

Olivetti PR4 SLIP User manual

Olivetti

Olivetti JS-602 User manual

Olivetti

Olivetti PG L230 User manual

Olivetti

Olivetti d-Color P216 User manual

Olivetti

Olivetti PGL2540 User manual

Olivetti

Olivetti JS-505 User manual

Olivetti

Olivetti d-Copia 600 User manual

Olivetti

Olivetti PR2 plus User manual

Olivetti

Olivetti PG L2435 User manual

Olivetti

Olivetti d-color MF651 User manual

Olivetti

Olivetti FS-529 User manual

Popular Printer manuals by other brands

Lexmark

Lexmark 1400 Series Manual

Canon

Canon i70 Series quick start guide

Evolis

Evolis Elypso user guide

Kyocera

Kyocera FS-9530DN specification

Canon

Canon LASER SHOT LBP-1210 Specifications

Samsung

Samsung BIXOLON SRP-350plusF user manual

Canon

Canon PIXMA PRO-1 Series Getting started

Canon

Canon PIXMA G3560 Online manual

Dell

Dell Color Laser Printer 2130cn user guide

Tektronix

Tektronix Phaser 840 user guide

Epson

Epson ET-7750 Programming guide

Canon

Canon CLBR 460ps Service manual

Eltron

Eltron P210 Guide manual

Ricoh

Ricoh MD-P1 Service manual

Epson

Epson SC-F7100 series user guide

Epson

Epson Stylus C40UX Service manual

Canon

Canon imagePASS-A2 Service guide

Canon

Canon S820D user guide