Olivetti d-Color MF2001 User manual
INSTALLATION MANUAL
Multifunction Color
d-Color MF2001
d-Color MF2501
Code: Y112990-2
PUBLICATION ISSUED BY:
Olivetti S.p.A.
Gruppo Telecom Italia
Via Jervis, 77 - 10015 Ivrea (TO)
Copyright © 2011 Olivetti
All rights reserved
2KZ/2K0
1-1
1-2 Installation
1-1 Installation environment
1. Temperature: 10 to 32.5°C/50 to 90.5°F
2. Humidity: 15 to 80% RH
3. Power supply: 120 V AC, 12.0 A
220 - 240 V AC, 6.5 A
4. Power supply frequency: 50 Hz ±2%/60 Hz ±2%
5. Installation location
Avoid direct sunlight or bright lighting. Ensure that the photoconductor will not be exposed to direct sun-
light or other strong light when removing paper jams.
Avoid locations subject to high temperature and high humidity or low temperature and low humidity; an
abrupt change in the environmental temperature; and cool or hot, direct air.
Avoid places subject to dust and vibrations.
Choose a surface capable of supporting the weight of the machine.
Place the machine on a level surface (maximum allowance inclination: 1°).
Avoid air-borne substances that may adversely affect the machine or degrade the photoconductor, such
as mercury, acidic of alkaline vapors, inorganic gasses, NOx, SOx gases and chlorine-based organic sol-
vents.
Select a well-ventilated location.
6. Allow sufficient access for proper operation and maintenance of the machine.
Figure 1-1
100 mm
3 15/16”
100 mm
3 15/16” 450 mm
17 11/16”
1000 mm
39 3/8”
500 mm
19 11/16”
Y112990-2 Sevice Manual
Service Manual 1-2 Y112990-2
1-2 Unpacking and installation
(1) Installation procedure
Unpack
Install the optional paper feeder
Release the scanner lock lever
Load paper
Remove the tapes and spacer
Start
Install the toner container
Attaching the language label
(Excluding 240V AC)
Make test copies
Switch the cassette heater switch
Install the expansion memory (option)
Connect the power cord
Exit maintenance mode
Print out the user setting list
Install the other optional devices
Installing toner
Output an own-status report
(maintenance item U000)
Completion of the machine installation
Install the job separator tray
2KZ/2K0
1-3
l
Figure 1-2
*1 Excluding 230V AC model
Place the machine on a level surface.
1
22
24
2
3
4
524
6
7
8
9
10
11
12
22
22
22
21
13 14
15
18
19
20
16
17
23
25
26
27
28
Unpacking
1. Bottom case
2. Bottom pad R
3. Bottom pad L
4. Machine cover
5. Machine
6. Inner case R
7. Inner case L
8. Spacer A
9. Plastic bag (540 × 950)
10. Outer case
11. Upper pad R
12. Upper pad L
13. Toner container /YCM
14. Toner container /K
15. Plastic bag (250 × 650)
16. CD-ROM *1
17. Installation guide, etc.
18. Plastic bag
19. Job separator tray
20. Plastic bag (400 × 600)
21. Power cord
22. Hinge joints
23. Quick installation guide
24. Reinforcement parts
25. Plastic bag
26. Lower pad
27. Front pad
28. Desiccant
Y112990-2 Sevice Manual
2KZ/2K0
1-4
1. Remove four tapes.
Figure 1-3
2. Open the DP top cover.
3. Slide two DP original width guides and
then remove the pad.
4. Close the DP top cover.
Figure 1-4
Remove the tapes and spacer
Tape Tape
Tape
Tape
DP top cover Pad
DP original width guides
Service Manual 1-2 Y104350-7
Service Manual 1-2 Y112990-2Service Manual 1-2 Y112990-2
Sevice Manual Y112990-2
2KZ/2K0
1-5
5. Open the DP.
6. Remove the protective sheet and paper.
Figure 1-5
7. Remove the paper.
8. Close the DP.
Figure 1-6
DP
Protective sheet
DP
Paper
Y112990-2 Sevice Manual
2KZ/2K0
1-6
9. Remove the tape.
Figure 1-7
10. Peel off two protective sheets.
11. Remove the spacer.
Figure 1-8
Tape
Spacer Protective sheets
Sevice Manual Y112990-2
2KZ/2K0
1-7
1. Gently push the job separator tray into
the machine along the guides.
Figure 1-9
1. Pull the scanner lock lever in the direc-
tion of the arrow. This will unlock the
scanner mechanism.
Figure 1-10
Install the job separator tray
Job separator tray
Right guide
Left guide
Release the scanner lock lever
Scanner
lock lever
Y112990-2 Sevice Manual
2KZ/2K0
1-8
1. Install the optional paper feeder as
required.
Figure 1-11
1. Pressing the paper width adjusting tab
as shown, move the paper width guides
to fit the paper size.
Figure 1-12
Install the optional paper feeder
Paper feeder
Load paper
Cassette
Paper width
adjusting tab
Paper width guides
Sevice Manual Y112990-2
Other manuals for d-Color MF2001
1
This manual suits for next models
3
Table of contents
Other Olivetti All In One Printer manuals
Olivetti
Olivetti d-color MF451 User manual
Olivetti
Olivetti d-COPIA 3013MFplus User manual
Olivetti
Olivetti d-color MF451 User manual
Olivetti
Olivetti d-COPIA4513MF plus User manual
Olivetti
Olivetti d-COLOR MF3300 Instruction Manual
Olivetti
Olivetti Copia 9915D User manual
Olivetti
Olivetti d-color MF551 Configuration guide
Olivetti
Olivetti d-Color MF2604 User manual
Olivetti
Olivetti d-Copia 18MF Operation User manual
Olivetti
Olivetti d-COPIA3003MF User manual
Olivetti
Olivetti d-Color MF220 User manual
Olivetti
Olivetti d-Copia 3501 User manual
Olivetti
Olivetti d-Copia 164MF User manual
Olivetti
Olivetti d-COLOR MF652 User manual
Olivetti
Olivetti d-COLOR MF652 User manual
Olivetti
Olivetti d-COLOR MF 2400 User manual
Olivetti
Olivetti d-COPIA3503MF User manual
Olivetti
Olivetti d-COLOR MF652 User manual
Olivetti
Olivetti d-COPIA3500MF plus User manual
Olivetti
Olivetti SD-505 User manual
