Olafus 02SK User manual
Product Manual
Olafus-02SK Wireless Speaker
LA-93YX-01 LA-97YX-01-BE
English
2
Product Manual
Thank you for your purchase of the wireless speaker. Before your primary use of this
product, please go through the safety instruction and installation guide carefully, and
save them for future reference.
If you have any questions or suggestions, please contact us through the ways
provided at the end of the user manual.
Do not set up near heat sources. Avoid radiators, stoves, and other devices that produce
heat. Avoid long-term exposure to sunlight and high temperatures.
There are 2 modes for this speaker: Bluetooth Mode, Audio Mode.
Please note: When the music is paused for 30 minutes, the speaker will enter into Sleep
Mode. To restart the speaker, please press Power ON/OFF/ button.
SAFETY INSTRUCTIONS
Olafus-02SK Wireless Speaker
English
3
PACKAGE CONTENTS
OLAFUS-02SK Wireless Speaker * 1 Speaker Stand * 1
USB Charging
Cable * 1
（60cm/2.99ft）
3.5mm Audio
Cable * 1
(100cm/3.28ft)
Hanging Hook * 1 Suction Cup * 1
English
4
PARAMETER
DIMENSION
93mm/3.66in
42mm/1.65in
82.5mm/3.24in
Battery Life 10-12H battery life at 60% volume
Stand-by Time ≥300 hours
Bluetooth Range ≤32.81 Feet/10m
Frequency Response 20HZ-20KHZ
Charging Time 2.5-3 hours
Working Voltage 5V / 1A
Wattage 5W
IP Rating IPX7
Battery Capacity 1200 mAh
English
5
SPEAKER CONTROL PANEL AND PORTS
1
1
2
2
3
3
4
4
5
6
6
57
7
8
8
Volume UP/Next:
Long press the button to increase the volume. Short press the button to move to the next song(only
function in Bluetooth Mode).
Power ON/OFF/Mode:
Long press the button to turn on/o the speaker. When the speaker is on, short press the button to swift
mode of the speaker.
Play/Pause/Pairing:
In Bluetooth Mode, short press the button to play or pause music. In Bluetooth Mode, long press the button
to cut the current Bluetooth connection and enter Pairing status.
Volume Down/Prev:
Long press the button to lower the volume. Short press the button to move to the previous song(only
function in Bluetooth Mode)
AUX Input Port Indicator Light
Microphone
Power Port: DC 5V 1A
English
6
INSTALLATION GUIDE OF SHOWER SPEAKER
Attach the speaker to the smooth surface, such as onto the glass or ceramic tile. Please Note: Do not attach the
speaker onto an uneven, dusty surface. You could splash some water onto the surface where you will attach the
speaker with the suction cup to reinforce the cup and speaker.
Insert the suction cup to the slot of the stand, and push it into the slot as the picture 1 shows.
Step 1
Picture 1
Picture 2
Step 2
English
7
Picture 3
Sucking
Picture 4
If you want to take o the speaker from the stand, you can press the bulge side of the holder and remove the
speaker as picture 3 shows.
If you want to take o the speaker with suction cup from the wall, peel o the suction cup.
Step 3
Bulge1
English
8
Long press the power button, the speaker will be turned on after hearing the prompt tone. The power indicator
light will turn blue and on for 3 seconds. Afterwards, the blue light fashes quickly, indicating the speaker is
entering Pairing mode.
Blue Light Flashes
Quickly.
OPERATION INSTRUCTION
The speaker will enter Bluetooth mode by default. For bluetooth connection, please do not connect with the
audio cable. If you connect the speaker with the supplied 3.5 mm audio cable, the speaker will automatically
enter audio mode. When the speaker is under audio mode, you can short press the Power Button to enter
Bluetooth mode.
Notice:
English
9
Turn on the Bluetooth function on your phone or other Bluetooth devices and search for our speaker which is
named as OLAFUS-02SK. Connect with the speaker.
1, Search for OLAFUS-02SK Speaker on your phone;
2, Connect with OLAFUS-02SK Speaker;
3, Playing music via OLAFUS-02SK Speaker.
After pairing successfully, there will be a prompt tone and the blue indicator light will be on constantly.
Blue Light Turns On.
When the speaker plays music from your phone, the blue indicator light
will ash slowly. The blue indicator light will be steady on when the
music is paused.
How to Connect the Speaker with a New Device.
When the speaker is connected with a device, you can long press the button PLAY/PAUSE/PAIRING to cut the
current connection and enter Pairing status.
Then the blue power indicator light will ash quickly, and the speaker can connect with a new device.
Blue Light Flashes Slowly.
Blue Light Flashes
Quickly.
English
10
When you turn on the speaker, it will automatically search for the device connected recently. If the bluetooth of
the device is activated, the speaker will automatically connect and pair. After successfully pairing, you will hear a
beep sound.
MEMORY FUNCTION OF THE SPEAKER
Bluetooth Devices
OLAFUS-02SK
Answer the Call: When the speaker is connected with phone, in case
of a coming call, you can pick up the call by short pressing the PLAY/
PAUSE button.
Hang UP: When the speaker is connected with the phone, you can
hang up by short pressing the PLAY/PAUSE button.
Reject a Call: When the speaker is connected with the phone, you
can reject a call by long pressing the PLAY/PAUSE button.
Redialing the Last Call: When the speaker is connected with the
phone, you can dial the last person you have talked on the phone by
short pressing the PLAY/PAUSE button twice.
TEL FUNCTION OF THE SPEAKER
Distance≤10m
This manual suits for next models
2
Table of contents
Languages:
