Oki LP-2060-MF User manual
Wide Format Printer
Teriostar LP-2060 Series
LP-2060
Multifunction Model
Printer Model
LP-2060-MF
User's Manual for Basic Printer Operation
U10000138300 December, 2017 Rev. 2
Chapter
1
Before Use
Chapter
2
Basic Operations
Chapter
3
Menu Functions
Chapter
4
Chapter
5
Chapter
6
TroubleshootingAppendix
Authentication
Function
Print Job Box
Function
U10000138300 December, 2017 Rev. 2
Copyright© 2016 OKI Data Infotech Corporation.
All rights reserved.
The contents of this manual may be changed without prior notice.
This product supports TCP/IP (IPv4/IPv6).
This product displays fonts created by TypeBank Co., Ltd. and ARPHIC TECHNOLOGY.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used
in accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
The CE mark, that shows that the products sold in the EU are conformed to the requirements of EC directive,
is statutorily obliged to be axed to the products.
In each directive, the scope of directive to be applied to equipment is explicitly dened. Our company’s
product LP-2060 series conforms the EMC directive, low voltage directive and RoHS Directive.
Inquiry of CE mark:
OKI Europe Ltd.
Wide Format Division
Siemensstrasse 9 , D-63263 Neu-Isenburg
Germany
Tel: +49 (0)6102 297 400
Fax: +49 (0)6102 297 50 400
OKI Data Infotech Corporation
8 Nakase 1-chome, Mihama-ku, Chiba-shi, Chiba 261-8507, Japan
Phone : +81 43 211 1363
Fax : +81 43 211 8709
3
LP-2060/LP-2060-MF User's Manual for Basic Printer Operation
Your Printer is a Teriostar LP-2060 Series wide format Printer (Referred
to as the Printer in this manual), and this manual describes the general
handling methods for the Printer, the Printer functions, and the operating
methods. They are written on the assumption that the Printer has already
been installed.
For details about the copy, scan, and submission functions in the
multifunction models, see the separate User's Manual for Multifunction
Printer Operation.
To handle the Printer safely and correctly, be sure to read the Safety
Precautions carefully before use. Keep this manual in a place where you
can easily read it when required.
The LP-2060 printer model may not be sold in some countries or regions.
Preface
4LP-2060/LP-2060-MF User's Manual for Basic Printer Operation
Safety Precautions
In this manual, the following symbols are used to alert the user to information that
will prevent damage to the Printer, and ensure its safe and correct use.
These symbols are explained below. Make sure that you thoroughly understand
the information. Always follow the instructions marked by these symbols.
Symbol Examples
Warning
If this information is ignored and the Printer is
handled incorrectly, it may result in serious injury or
death.
Caution
If this information is ignored and the Printer is
handled incorrectly, it may result in injury or machine
damage.
UThis symbol indicates that caution is required (includes dangers and
warnings).
The example on the left indicates a safety Warning or
Precaution.
This symbol indicates a prohibited action.
The example on the left means Do not disassemble.
This symbol indicates required actions or instructions.
The example on the left means Disconnect the power plug from
the outlet.
5
LP-2060/LP-2060-MF User's Manual for Basic Printer Operation
Warning
Be very careful not to touch the fuser unit labeled HIGH TEMPERATURE inside
the Printer.
Burn injuries may result.
Do not disassemble or modify the Printer.
An accident or malfunction may result.
Do not heat a toner cartridge or a waste toner bottle containing waste toner, nor
place it into a ame.
It may burst or ignite, resulting in an accident or re.
Never use the Printer in a location exposed to abnormally high humidity
or moisture.
A re, electric shock, or malfunction may result.
Do not drop metal pieces such as staples, or spill water, or other liquids inside
the Printer or through gaps.
A re, electric shock, or malfunction may result.
Do not connect or disconnect the power cord or other parts with wet hands. An
electric shock may result.
In the following situations, turn o the power, and disconnect the power plug
from the outlet. If you continue using the Printer in an abnormal condition, an
accident or re may result.
When cleaning
When an abnormal odor, noise, or smoke is emitted
When foreign matter such as metal pieces or water get inside the Printer
or through gaps
When a problem that must be repaired by the service representative oc-
curs
Connect the power plug separately to a power socket with a rated voltage
of 120V and a rated current of 16A or more, or to a power socket with a rated
voltage of 230V and a rated current of 9A or more. To prevent a re or electric
shock, avoid the sharing of power with other equipment.
6LP-2060/LP-2060-MF User's Manual for Basic Printer Operation
Be sure to remove the dust on the power plug and the socket. Do not use a
dusty plug as a current leak due to humidity on its surface may heat the plug
and result in re.
Make sure that the Printer is well grounded. Failure to ground the Printer may
result in electrical shock, re, and increased susceptibility to electromagnetic
interference.
Do not x, twist, bind, modify, stretch, or bend excessively the power cord. Do
not put heavy object on it. A damaged power cord may heat and result in re or
electrical shock.
If the power cord is cut or if the wires are exposed, ask a service representative
for replacement.
Using a damaged power cord may result in re or electrical shock.
Caution
Do not disassemble or modify the toner cartridge.
The toner on your skin will have a negative eect.
If ink stains your skin or clothing, wash with soap and water immediately.
To prevent a toner leakage, do not drop the toner cartridge nor expose it to
strong impacts.
If toner gets into your eyes, do not rub your eyes, and wash the toner out. Visit a
doctor immediately.
As the roll paper is heavy, handle it carefully to make sure that you do not drop
it.
Dropping the roll paper on your feet may result in injury.
When installing the roll paper, use the cutter to cut the end of the paper. At this
time, be careful not to injure yourself on the cutter.
Install the Printer close to a power outlet. Make sure the outlet is easy to reach in
case the power plug needs to be disconnected in an emergency.
7
LP-2060/LP-2060-MF User's Manual for Basic Printer Operation
When connecting and disconnecting the power cord, hold it by the plug or
connector.
To prevent a re, electric shock, or malfunction, avoid pulling the cord.
If you use a power strip, change it for a new one at least once a year.
Do not use an extension cable or an adapter plug.
Once a month, turn the power switch o and inspect the followings. Contact
your service representative if you detect any problem.
The plastic insulator at the base of the plug's pins does not suer from
heat deformation.
The plug's pins are not bent or covered by rust.
There is no dust between the plug's pins.
The power cord is not frayed and the energized wires are not exposed.
The plug is rmly plugged into the socket.
There is no dust on the plug or the socket.
Before moving the Printer from its current installation location to another
location, contact your service representative.
In addition to the items above, observe the warnings and precautions in each
section of the manual.
8LP-2060/LP-2060-MF User's Manual for Basic Printer Operation
Warning Labels
Warning labels are axed to the Printer in the locations shown in the gure below.
Make sure you understand the information on the warning labels before handling
the Printer.
(3) Caution label to prevent hands
from being stuck
MF
(1) HIGH TEMPERATURE
caution label
(1) HIGH TEMPERATURE
caution label
(1) HIGH TEMPERATURE
caution label
(2) Instruction label to remove jams
9
LP-2060/LP-2060-MF User's Manual for Basic Printer Operation
(1) HIGH TEMPERATURE caution label, affixed inside, seen when the fuser unit
door is opened.
This label warns against touching heated parts.
The fuser unit becomes very hot. Be careful not to touch this area inside the
Printer, while the cover is opened, e.g., to remove a paper jam.
U00120740500
SEE MANUAL
取扱説明書を参照
䇋খ䯙Փ⫼䇈ᯢк
(2) Instruction label to remove jams
This label indicates the removal direction for jammed paper when a jam occurs
in the fuser unit.
Remove the paper by following the instruction on the label.
(3) Caution label to prevent hands from being stuck
MF
This label raises your caution to prevent your hands from being stuck between
the Printer and the scanner.
On closing the scanner, do not place your hands near this label.
10 LP-2060/LP-2060-MF User's Manual for Basic Printer Operation
Reading the Manual
Manual Structure
This manual is comprised of 6 chapters and an appendix.
Chapter 1 describes information such as the printer features and part names. These
should be known before starting operations. First, read Chapter 1 to understand
the basic information about the Printer.
Chapter 2 describes the items that are required for operating the Printer, such as
turning the power on, and o, and setting the paper. Read this chapter to learn
about the basic methods for handling the Printer.
Chapter 3 describes the Printer's functions and their setup procedure.
Chapter 4 describes the Print Job Box function of the Printer. Read this chapter to
learn the basic settings of this function and how to use it.
Chapter 5 describes the authentication function for the Printer. Read this chapter
to manage the Printer and the users of the Printer.
Chapter 6 describes the action to solve a Printer problem. Take appropriate action
by following the instructions in this chapter.
The Appendix contains the Printer's basic specications, command lists, and menu
structure.
This manual suits for next models
2
Table of contents
Other Oki Printer manuals
Oki
Oki C7350hdn Firmware update
Oki
Oki proColor Pro930 Series User manual
Oki
Oki OKIPAGE18 User manual
Oki
Oki C810 User manual
Oki
Oki C7500 V2 Installation and maintenance instructions
Oki
Oki B4100 Firmware update
Oki
Oki C3400n User manual
Oki
Oki B2200 User manual
Oki
Oki B720dn User manual
Oki
Oki Microline 390 User manual
