OHAUS ranger 7000 User manual
RANGER®7000
Terminal Tower Mount Kit
Instruction Manual
Manual de instrucciones
del kit de montaje de la torre del
terminal
de la RANGER®7000
RANGER®7000
Kit de montage du terminal sur
tourelle
Manuel d’instructions
RANGER® 7000
Säulenset zur Terminalmontage
Bedienungsanleitung
RANGER®7000
Kit di montaggio della torretta
terminale
Instruction Manual
info@GlobalScientificSupply.com
www.GlobalScientificSupply.com
GLOBAL SCIENTIFIC SUPPLY
The Laboratory Supply Company!
Ranger 7000®Terminal Tower Mount Kit EN-1
1. INTRODUCTION
Please read this manual completely before installation and operation.
CAUTION:
READ ALL SAFETY WARNINGS BEFORE INSTALLING,
MAKING CONNECTIONS, OR SERVICING. FAILURE TO
COMPLY WITH THESE WARNINGS COULD RESULT IN
PERSONAL INJURY AND/OR PROPERTY DAMAGE.
RETAIN ALL INSTRUCTIONS FOR FUTURE REFERENCE.
1.1 Kit Contents
Eight M5 Screws
Hex Wrench
Tower with Top
and Foot
info@GlobalScientificSupply.com
www.GlobalScientificSupply.com
GLOBAL SCIENTIFIC SUPPLY
The Laboratory Supply Company!
EN-2 Ranger7000®Terminal Tower Mount Kit
2. INSTALLATION
2.1 Safety Precautions
For safe and dependable operation of this equipment, please comply with
all safety precautions mentioned in this manual.
Disconnect equipment from mains power supply before installation.
2.2 Installation procedure
Follow the steps below. Refer to the Figures when performing the steps.
1
Make sure the unit is unplugged and
turned OFF.
2
Detach the Terminal:
Push in one of the buttons on the
side to disconnect. Then pull the
Terminal away from the base.
info@GlobalScientificSupply.com
www.GlobalScientificSupply.com
GLOBAL SCIENTIFIC SUPPLY
The Laboratory Supply Company!
Ranger 7000®Terminal Tower Mount Kit EN-3
3
Remove the Joint plate from the
Terminal by loosening the three M5
screws.
Joint Plate
M5 screws
M5 screws
Disconnect the cable
between the base and
terminal
info@GlobalScientificSupply.com
www.GlobalScientificSupply.com
GLOBAL SCIENTIFIC SUPPLY
The Laboratory Supply Company!
EN-4 Ranger7000®Terminal Tower Mount Kit
4
Unwind the Terminal cable from the
base.
5
Attach Tower to the Base using the
four M5 screws and hex wrench
(supplied).
Secure the cable as shown:
1. First, under the cable guide,
2. Then under the groove in the
tower base.
Insert the cable plug in the tower
base and feed it through the column.
6
Pull the Terminal cable through the
top of the column.
M5 screws
M5 Screws
info@GlobalScientificSupply.com
www.GlobalScientificSupply.com
GLOBAL SCIENTIFIC SUPPLY
The Laboratory Supply Company!
Ranger 7000®Terminal Tower Mount Kit EN-5
7
Install the joint plate on the back of
the terminal, securing it with the 4
screws.
Tighten the screws.
8
Plug in the cable to the Terminal, then
rotate the screw and tighten it.
Pull excess cable down into the
column for safety.
9
Adjust the Tower foot so it supports
the Tower and is level with the feet of
the Base.
info@GlobalScientificSupply.com
www.GlobalScientificSupply.com
GLOBAL SCIENTIFIC SUPPLY
The Laboratory Supply Company!
EN-6 Ranger7000®Terminal Tower Mount Kit
10
To adjust the Terminal viewing angle:
Loosen the knobs that secures the
Tower top and adjust the Terminal.
3. KIT DIMENSIONS
Figure 3-1. Tower kit dimensions
info@GlobalScientificSupply.com
www.GlobalScientificSupply.com
GLOBAL SCIENTIFIC SUPPLY
The Laboratory Supply Company!
Ranger 7000®Terminal Tower Mount Kit EN-7
COMPLIANCE
Disposal
In conformance with the European Directive 2002/96 EC on Waste Electrical and
Electronic Equipment (WEEE) this device may not be disposed of in domestic waste.
This also applies to countries outside the EU, per their specific requirements.
Please dispose of this product in accordance with local regulations at the collecting
point specified for electrical and electronic equipment. If you have any questions,
please contact the responsible authority or the distributor from which you purchased
this device.
Should this device be passed on to other parties (for private or professional use), the
content of this regulation must also be related.
For disposal instructions in Europe, refer to www.ohaus.com/weee.
Thank you for your contribution to environmental protection.
info@GlobalScientificSupply.com
www.GlobalScientificSupply.com
GLOBAL SCIENTIFIC SUPPLY
The Laboratory Supply Company!
ES-2 Kit de montaje de la torre del terminal de la Ranger 7000®
2. INSTALACIÓN
2.1 Precauciones de seguridad
Para un funcionamiento seguro y fiable de este equipo, cumpla con todas
las precauciones de seguridad mencionadas en este manual.
Desconecte el equipo de la red antes de la instalación.
2.2 Procedimiento de instalación
Siga los siguientes pasos. Consulte las figuras al realizar los pasos.
1
Asegúrese de que la unidad está
desenchufada y APAGADA.
2
Separe el terminal.
Para desconectar, pulse uno de los
botones en el lateral. Después
separe el terminal de la base.
info@GlobalScientificSupply.com
www.GlobalScientificSupply.com
GLOBAL SCIENTIFIC SUPPLY
The Laboratory Supply Company!
Kit de montaje de la torre del terminal de la Ranger 7000®ES-3
3
Retire la placa de unión del terminal
aflojando los tres tornillos M5.
Placa de unión
Tornillos
M5
Tornillos
M5
Desconecte el cable entre
la base y el terminal
info@GlobalScientificSupply.com
www.GlobalScientificSupply.com
GLOBAL SCIENTIFIC SUPPLY
The Laboratory Supply Company!
Other manuals for ranger 7000
7
Table of contents
Languages:
Other OHAUS Scale manuals
OHAUS
OHAUS Ranger User manual
OHAUS
OHAUS CKW3R User manual
OHAUS
OHAUS CL Series User manual
OHAUS
OHAUS Scout SPX User manual
OHAUS
OHAUS Adventurer Pro User manual
OHAUS
OHAUS Defender 6000 Indicators User manual
OHAUS
OHAUS PS Series User manual
OHAUS
OHAUS SB1200 User manual
OHAUS
OHAUS ANALYTICAL Plus Series User manual
OHAUS
OHAUS SP202 User manual
OHAUS
OHAUS Adventurer Pro AV212DM Configuration guide
OHAUS
OHAUS Defender 3000 Series User manual
OHAUS
OHAUS FD Series User manual
OHAUS
OHAUS NV123 User manual
OHAUS
OHAUS Valor 3000 User manual
OHAUS
OHAUS Defender 3000 Series User manual
OHAUS
OHAUS CF1000R User manual
OHAUS
OHAUS Adventurer Pro AV53 User manual
OHAUS
OHAUS PS Series User manual
OHAUS
OHAUS Defender 3000 Series User manual
