NUUO NAS NVRmini User manual

The Intelligent Surveillance Solution

NAS NVRmini

Quick Start Guide

Table of Contents

English..............................................................................................................2

Čeština ...........................................................................................................12

Deutsch..........................................................................................................21

Français.........................................................................................................31

Ialiano............................................................................................................41

Español..........................................................................................................50

Pусский..........................................................................................................60

日本語............................................................................................................70

繁體中文 ........................................................................................................80

한국어 ............................................................................................................89

Polski..............................................................................................................99

Srpski............................................................................................................109

Step 1: Unpacking the Unit

This package contains the following items:

The unit

Quick Start Guide

Screws for disk drives (1 package)

Power cord

Warranty card

12V DC power transformer (2 bay unit)

CD with Install Wizard, Backup, Live View, and Playback

application, user manual, and quick start guide

Warning

The electronic components within the unit can be damaged by

Electro-Static Discharge (ESD). Please take precautions at all

times when handling the unit or its sub-assemblies.

Important

To configure the unit, you must install the software onto a

desktop/ laptop running Windows XP-SP3, 2003-SP2, Vista-SP2,

Windows 7.

2 bay unit front view

English

Ethernet Activity

LED

Drive Activity LED

Power Button

System Status LED

Disk Drive

Drive Carrier

Drive Status LED

2 bay unit rear view

4 bay unit front view

Disk Drive

Drive Carrier

Drive Status LED

Drive Activity LED

Ethernet Activity LED

Power Button

System Status LED

Cooling Fan

USB Connection

RJ45 Network Connection

Power Connection

4 bay unit rear view

4 bay unit front view (S-series)

Cooling Fan

RJ45 Network

Connection

USB Connections

Power Supply Fan

Power Connection

English

Disk Drive

Drive Carrier

Drive Status LED

Drive Activity LED

System Status LED

Ethernet Activity LED

4 bay unit rear view (S-series)

Step 2: Installing Disk Drives

You can populate this unit with SATA1.5 Gb/s or 3.0 Gb/s disk drives. For

optimal performance, install disk drives of the same model and capacity.

Your disk drives will become a RAID Volume on this unit.

1. Open the lid on the front of the unit enclosure.

2. Pull a disk drive carrier from the enclosure. See the front view figure.

3. Carefully lay the disk drive into the drive carrier, making sure that the

screw holes on the sides of the carrier align with the screw holes in the

drive.

4. Insert the screws through the holes in the drive carrier and into the sides

of the disk drive.

Install only the counter-sink screws supplied with the unit.

Install four screws per disk drive.

Make sure each screw is securely tightened, but be careful not to

over-tighten.

5. Reinstall the drive carrier into the unit enclosure.

6. Repeat step 2 through 5 for the other disk drives.

Power Button

RJ45 Network

Connection

Cooling Fan

USB Connections

eSATA Connection

Power Connection

Step 3: Connecting to the Network

1. Attach one end of the network cable to the RJ45 network connection.

See the rear view figure.

2. Attach the other end of the network cable to your Ethernet hub or

switch.

Important

If there are multiple networks at your facility, note the network to

which you connect the unit. You will need this information during

the setup process.

Step 4: Connecting the Power

1. Attach the power cord from the power source to the power adapter.

2. Connect the power adapter to the back of the unit enclosure. See the

rear view figure.

3. On the front of the unit, press the power button. See the front view

figure.

Important

Before pressing the power button, please make sure the two

ends of the network cable are attached to the unit and the

Ethernet router, respectively. Please also enable the DHCP

function within the network, as the unit will retrieve an IP address

through DHCP by default.

It takes about a minute for the unit to fully power up. Once it is powered up:

The System Status LED turns green. See the front view figure.

The buzzer beeps one time.

Step 5: Installing the Software

1. Insert the CD into your CDROM.

2. Double-click Setup.exe to begin installation.

3. Click the Next button to continue with the installation.

English

4. Click the “I accept the terms of the license agreement” option, and then

click the Next button.

5. Insert your “User Name” and “Company Name”, and then click the Next

button.

6. Select the setup type, and then click the Next button.

7. Click the Install button to proceed with installation.

8. When the above-mentioned installation processes are finished, a final

installation screen appears. Click the Finish button to close the installer.

Step 6: Setting up the Unit

The software Install Wizard performs the setup procedures on your unit.

After the procedure, you can begin using this unit.

1. Go to Start > NUUO NVRmini > Install Wizard.

2. This program will show the default language setting and initiation mode.

3. Choose your preferred language and initiation mode, and then click the

Next button.

Express Mode: you don’t need to set the date, time, network settings,

and RAID level. (After step 5, jump to step 9 directly.)

Advance Mode: you need to set your specific date, time, and

network settings.

4. The Install Wizard program will search for all the units on the internet

right now. Choose one of them, and then click the Next button.

5. Type in the password, and then click the OK button.

Note

The default Administrator password is “admin”.

6. Set the time zone, date, and time, and then click the Next button.

English

7. Select the network settings, and then click the Next button.

Obtain network settings automatically from DHCP server or

wizard: apply all settings which are automatically generated by the

DHCP server, such as IP, netmask, gateway, and DNS.

Make network settings manually: select your preferred settings one

by one.

8. If you need to set a new disk(s), check the “Create new storage” option.

After checking, click the Next button.

Other manuals for NAS NVRmini

Table of contents

Languages:

Other NUUO Security System manuals

NUUO

NUUO Titan NVR User manual

NUUO

NUUO SCB-C24 User manual

NUUO

NUUO NAS NVRmini User manual

NUUO

NUUO NVRsolo User manual

NUUO

NUUO NAS NVRmini User manual

NUUO

NUUO NVRsolo NS-8060 User manual

NUUO

NUUO NVRmini 2 User manual

NUUO

NUUO NVRmini 2 User manual

NUUO

NUUO G3 Card Mounting instructions

NUUO

NUUO NVRmini 2 User manual

NUUO

NUUO Crystal User manual

NUUO

NUUO 6000S SERIES User manual

NUUO

NUUO DigiPlayer LDP1601 User manual

NUUO

NUUO NVRsolo User manual

Popular Security System manuals by other brands

Inner Range

Inner Range Concept 2000 user manual

Climax

Climax Mobile Lite R32 Installer's guide

CADDX

CADDX NX-6 user manual

FBII

FBII XL-31 Series installation instructions

Johnson Controls

Johnson Controls PENN Connected PC10 Install and Commissioning Guide

Aeotec

Aeotec Siren Gen5 quick start guide

Blaupunkt

Blaupunkt SA 2700 quick start guide

IDEAL

IDEAL Accenta Engineering information

AJAX

AJAX DoubleButton user manual

Swann

Swann SW-P-MC2 Specifications

Ecolink

Ecolink Siren+Chime user manual

Digital Monitoring Products

Digital Monitoring Products XR150 user guide

EDM

EDM Solution 6+6 Wireless-AE installation manual

Highway Safety Group

Highway Safety Group EA401 user manual

Siren

Siren LED GSM operating manual

Detection Systems

Detection Systems 7090i Installation and programming manual

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 instructions

Siemens

Siemens FDM273 manual