Novell LINUX ENTERPRISE SERVER 10 SP2 - VIRTUALIZATION WITH... User manual

SUSE Linux Enterprise

Server

www.novell.com10 SP2

October27,2009 Virtualization with Xen

Virtualization with Xen

Legal Notice

This manual is protected under Novell intellectual property rights. By reproducing, duplicating or

distributing this manual you explicitly agree to conform to the terms and conditions of this license

agreement.

This manual may be freely reproduced, duplicated and distributed either as such or as part of a bundled

package in electronic and/or printed format, provided however that the following conditions are ful-

lled:

That this copyright notice and the names of authors and contributors appear clearly and distinctively

on all reproduced, duplicated and distributed copies. That this manual, specically for the printed

format, is reproduced and/or distributed for noncommercial use only. The express authorization of

Novell, Inc must be obtained prior to any other use of any manual or part thereof.

For Novell trademarks, see the Novell Trademark and Service Mark list http://www.novell

.com/company/legal/trademarks/tmlist.html. * Linux is a registered trademark of

Linus Torvalds. All other third party trademarks are the property of their respective owners. A trademark

symbol (®, ™ etc.) denotes a Novell trademark; an asterisk (*) denotes a third party trademark.

All information found in this book has been compiled with utmost attention to detail. However, this

does not guarantee complete accuracy. Neither Novell, Inc., SUSE LINUX Products GmbH, the authors,

nor the translators shall be held liable for possible errors or the consequences thereof.

Contents

Preface v

1Introduction to Xen Virtualization 1

1.1 BasicComponents......................... 1

1.2 Understanding Virtualization Modes . . . . . . . . . . . . . . . . . 2

1.3 Xen Virtualization Architecture . . . . . . . . . . . . . . . . . . . . 3

1.4 The Virtual Machine Host . . . . . . . . . . . . . . . . . . . . . . 4

2Setting Up a Virtual Machine Host 7

2.1 Best Practices and Suggestions . . . . . . . . . . . . . . . . . . . . 8

2.2 Setting Up a 32-Bit Domain 0 on a 64-Bit Hypervisor . . . . . . . . . . 9

2.3 Managing Domain 0 Memory . . . . . . . . . . . . . . . . . . . . 11

2.4 Networks Card in Fully Virtualized Guests . . . . . . . . . . . . . . . 12

2.5 Starting the Virtual Machine Host . . . . . . . . . . . . . . . . . . 13

3Setting Up Virtual Machines 15

3.1 Creating a Virtual Machine . . . . . . . . . . . . . . . . . . . . . 15

3.2 Installing an Operating System . . . . . . . . . . . . . . . . . . . 17

3.3 Including Add-On Products in the Installation . . . . . . . . . . . . . 21

3.4 Using the Command Line to Create Virtual Machines . . . . . . . . . . 22

3.5 Deleting Virtual Machines . . . . . . . . . . . . . . . . . . . . . 23

3.6 Using an Existing SUSE Linux Enterprise Server Virtual Machine . . . . . 23

3.7 Troubleshooting ......................... 24

4Managing a Virtualization Environment 27

4.1 Virtual Machine Manager . . . . . . . . . . . . . . . . . . . . . 28

4.2 Controlling the Host by Modifying xend Settings . . . . . . . . . . . . 29

4.3 Conguring a Virtual Machine by Modifying its xend Settings . . . . . . 30

4.4 The xm Command ........................ 31

5Virtualization: Conguration Options and Settings 33

5.1 VirtualCDReaders........................ 33

5.2 Remote Access Methods . . . . . . . . . . . . . . . . . . . . . . 38

5.3 VNCViewer........................... 39

5.4 The Boot Loader Program . . . . . . . . . . . . . . . . . . . . . 42

5.5 Changing the Host’s Desktop from Text Mode to GUI Mode . . . . . . . 45

5.6 Paravirtual Mode and Journaling File Systems . . . . . . . . . . . . . 46

5.7 Virtual Machine Initial Startup Files . . . . . . . . . . . . . . . . . 47

5.8 Sparse Image Files and Disk Space . . . . . . . . . . . . . . . . . . 49

5.9 VirtualKeyboards......................... 49

5.10 Mapping Physical Storage to Virtual Disks . . . . . . . . . . . . . . . 52

5.11 VirtualDisks........................... 53

5.12 Migrating Virtual Machines . . . . . . . . . . . . . . . . . . . . . 54

5.13 Passing Key Combinations to Virtual Machines . . . . . . . . . . . . . 54

5.14 xm block-list Device Numbers . . . . . . . . . . . . . . . . . . . . 55

5.15 File-Backed Virtual Disks and Loopback Devices . . . . . . . . . . . . 56

5.16 Saving Virtual Machines . . . . . . . . . . . . . . . . . . . . . . 56

5.17 Restoring Virtual Machines . . . . . . . . . . . . . . . . . . . . . 57

5.18 Virtual Machine States . . . . . . . . . . . . . . . . . . . . . . . 59

6Xen Guest Systems 61

6.1 NetWare Virtual Machines . . . . . . . . . . . . . . . . . . . . . 61

6.2 OES Linux Virtual Machines . . . . . . . . . . . . . . . . . . . . . 61

6.3 SUSE Linux Virtual Machines . . . . . . . . . . . . . . . . . . . . 61

6.4 Windows Virtual Machines . . . . . . . . . . . . . . . . . . . . . 70

7Virtual Machine Drivers 71

7.1 Buying a Support Subscription . . . . . . . . . . . . . . . . . . . 72

7.2 Loading the Driver Pack . . . . . . . . . . . . . . . . . . . . . . 73

7.3 SUSE Drivers for Red Hat Enterprise Linux 4 on Xen . . . . . . . . . . 73

7.4 SUSE Drivers for Red Hat Enterprise Linux 5 on Xen . . . . . . . . . . 77

7.5 SUSE Drivers for Windows on Xen . . . . . . . . . . . . . . . . . . 81

7.6 SUSE Drivers for SUSE Linux Enterprise Server on Xen . . . . . . . . . 89

Preface

This manual offers an introduction to virtualization technology of your SUSE Linux

Enterprise Server. It features an overview of the various elds of application and instal-

lation types of each of the platforms supported by SUSE Linux Enterprise Server as

well as a short description of the installation procedure.

Quality service is also available. Experts can answer questions about installation or

conguration, make reliable security updates available, and support development

projects.

1 Feedback

We want to hear your comments and suggestions about this manual and the other doc-

umentation included with this product. Please use the User Comments feature at the

bottom of each page of the online documentation and enter your comments there.

2 Additional Documentation

For additional documentation on this product, refer to http://www.novell.com/

documentation/sles10/index.html:

Architecture-Specic Information

Architecture-specic information needed to prepare a SUSE Linux Enterprise

Server target for installation.

Installation and Administration

In-depth installation and administration for SUSE Linux Enterprise Server.

For a documentation overview on the SUSE® Linux Enterprise Desktop product, refer

to http://www.novell.com/documentation/sled10/index.html.

Documentation regarding the Open Enterprise Server 2 is found at http://www

.novell.com/documentation/oes2/index.html.

3 Documentation Conventions

The following typographical conventions are used in this manual:

•/etc/passwd: lenames and directory names

•placeholder: replace placeholder with the actual value

•PATH: the environment variable PATH

•ls,--help: commands, options, and parameters

•user: users or groups

•Alt,Alt +F1: a key to press or a key combination; keys are shown in uppercase as

on a keyboard

•File,File >Save As: menu items, buttons

• This paragraph is only relevant for the specied architectures. The arrows mark

the beginning and the end of the text block.

This paragraph is only relevant for the specied architectures. The arrows mark

the beginning and the end of the text block.

•Dancing Penguins (Chapter Penguins, ↑Another Manual): This is a reference to a

chapter in another manual.

vi Virtualization with Xen

Introduction to Xen

Virtualization

Virtualization of operating systems is used in many different computing areas. It nds

its applications in server consolidation, energy saving efforts, or the ability to run older

software on new hardware, for example. This chapter introduces and explains the

components and technologies you need to understand to set up and manage a Xen-based

virtualization environment.

1.1 Basic Components

The basic components of a Xen-based virtualization environment are the Xen hypervisor,

the Domain0, any number of other VM Guests, and the tools, commands, and congu-

ration les that let you manage virtualization. Collectively, the physical computer run-

ning all these components is referred to as a virtual machine host because together these

components form a platform for hosting virtual machines.

The Xen Hypervisor

The Xen hypervisor, sometimes referred to generically as a virtual machine monitor,

is an open-source software program that coordinates the low-level interaction be-

tween virtual machines and physical hardware.

The Domain0

The virtual machine host environment, also referred to as domain0 or controlling

domain, is comprised of several components, such as:

Introduction to Xen Virtualization 1

• The SUSE Linux operating system, which gives the administrator a graphical

and command line environment to manage the virtual machine host components

and its virtual machines.

NOTE

The term “Domain0” refers to a special domain that provides the manage-

ment environment. This may be run either in graphical or in command

line mode.

• The xend daemon (xend), which stores conguration information about each

virtual machine and controls how virtual machines are created and managed.

• A modied version of QEMU, which is an open-source software program that

emulates a full computer system, including a processor and various peripherals.

It provides the ability to host operating systems in full virtualization mode.

Xen-Based Virtual Machines

A Xen-based virtual machine, also referred to as a domain, consists of the follow-

ing components:

• At least one virtual disk that contains a bootable operating system. The virtual

disk can be based on a le, partition, volume, or other type of block device.

• Virtual machine conguration information, which can be modied by exporting

a text-based conguration le from xend or through Virtual Machine Manager.

Management Tools, Commands, and Conguration Files

There is a combination of GUI tools, commands, and conguration les to help

you manage and customize your virtualization environment.

1.2 Understanding Virtualization

Modes

Guest operating systems are hosted on virtual machines in either full virtualization

mode or paravirtual mode. Each virtualization mode has advantages and disadvantages.

2Virtualization with Xen

• Full virtualization mode lets virtual machines run unmodied operating systems,

such as Windows* Server 2003 and Windows XP, but requires the computer running

as the virtual machine host to support hardware-assisted virtualization technology,

such as AMD* Virtualization or Intel* Virtualization Technology.

Some guest operating systems hosted in full virtualization mode, can be congured

to run SUSE Linux Enterprise Virtual Machine Drivers instead of operating-system-

specic drivers. Running virtual machine drivers improves performance dramati-

cally on guest operating systems, such as Windows XP and Windows Server 2003.

For more information, see Chapter 7, Virtual Machine Drivers (page 71).

• Paravirtual mode does not require the host computer to support hardware-assisted

virtualization technology, but does require the guest operating system to be modied

for the virtualization environment. Typically, operating systems running in paravir-

tual mode enjoy better performance than those requiring full virtualization mode.

Operating systems currently modied to run in paravirtual mode are referred to as

paravirtualized operating systems and include SUSE Linux Enterprise Server 10

and NetWare® 6.5 SP7.

1.3 Xen Virtualization Architecture

The following graphic depicts a virtual machine host with four virtual machines. The

Xen hypervisor is shown as running directly on the physical hardware platform. Note,

that the controlling domain is also just a virtual machine, although it has several addi-

tional management tasks compared to all other virtual machines.

Introduction to Xen Virtualization 3

Figure 1.1 Virtualization Architecture

On the left, the virtual machine host’s Domain0 is shown running the SUSE Linux op-

erating system. The two virtual machines shown in the middle are running paravirtualized

operating systems. The virtual machine on the right shows a fully virtual machine run-

ning an unmodied operating system, such as Windows Server 2003 or Windows XP.

1.4 The Virtual Machine Host

After you install the virtualization components and reboot the computer, the GRUB

boot loader menu should display a Xen menu option. Selecting the Xen menu option

loads the Xen hypervisor and starts the Domain0 running the SUSE Linux operating

system.

Running on domain 0, the SUSE Linux operating system displays the installed text

console or desktop environment, such as GNOME or KDE. When opened, each virtual

machine is displayed in its own window inside the controlling domain 0.

4Virtualization with Xen

This manual suits for next models

Table of contents

Other Novell Software manuals

Novell

Novell SUPPORT ADVISOR 2.0.1 Instruction Manual

Novell

Novell LINUX ENTERPRISE DESKTOP 11 User manual

Novell

Novell PRIVILEGED USER MANAGER 2.2.1 - ADMINISTRATION GUIDE... User manual

Novell

Novell LINUX ENTERPRISE DESKTOP 10 - GNOME... User manual

Novell

Novell PLATESPIN ORCHESTRATE 2.0.2 - UPGARDE GUIDE... Operator's manual

Novell

Novell LINUX ENTERPRISE 10 SP1 - LINUX AUDIT User manual

Novell

Novell ACCESS MANAGER 3.1 SP2 - README 2010 User manual

Novell

Novell EDIRECTORY 8.8 SP5 Quick start guide

Novell

Novell OPEN ENTERPRISE SERVER 2 SP2 -... User manual

Novell

Novell LINUX ENTERPRISE DESKTOP 11 User manual

Novell

Novell LINUX ENTERPRISE DESKTOP 10 SP2 Manual

Novell

Novell APPARMOR - AND Datasheet

Novell

Novell IDENTITY MANAGER DRIVER FOR ID PROVIDER 3.6.1 -... User manual

Novell

Novell IDENTITY MANAGER 3.6.1 - PASSWORD MANAGEMENT User manual

Novell

Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - NETWORK DISCOVERY DATABASE... Programming manual

Novell

Novell GROUPWISE 7 - SECURITY POLICIES User manual

Novell

Novell GROUPWISE 8 - POST OFFICES User manual

Novell

Novell CLIENT FOR LINUX 2.0 SP1 - ADMINISTRATION User manual

Novell

Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - NETWORK DISCOVERY DATABASE... Quick guide

Novell

Novell ZENWORKS APPLICATION VIRTUALIZATION 8.0 -... User manual

Novell

Novell LINUX ENTERPRISE SERVER 11 - VIRTUALIZATION User manual

Novell

Novell ENHANCED SMART CARD METHOD 3.0.1 - INSTALLATION... User manual

Novell

Novell GROUPWISE 8 - MONITOR User manual

Novell

Novell IDENTITY MANAGER 3.6.1 - STAGING BEST PRACTICES GUIDE... User manual

Popular Software manuals by other brands

COMPRO

COMPRO COMPROFM manual

Muratec

Muratec OFFICEBRIDGE ONLINE user guide

Oracle

Oracle Contact Center Anywhere 8.1 installation guide

Adobe

Adobe 65007312 - Photoshop Lightroom Programmer's guide

Avaya

Avaya NULL One-X for RIM Blackberry user guide

HP ProLiant BL420c user guide

PS Audio

PS Audio PowerPlay Programming manual

Brady

Brady LOCKOUT PRO 3.0 Administrator's guide

Avaya

Avaya Interaction Center user guide

Texas Instruments

Texas Instruments TI-83 Plus Silver Edition Guide book

Oracle

Oracle Application 9i Configuration guide

Acer

Acer RDM user guide

Canon

Canon Vixia HF21 instruction manual

Canon

Canon ZR950 instruction manual

Samsung

Samsung Auto Backup user manual

Polycom

Polycom Vortex EF2201 Application note

Brocade Communications Systems

Brocade Communications Systems Brocade 8/12c user manual

Lexmark

Lexmark Apps Administrator's guide