Nokia Reaction User manual

Nokia Reaction Bluetooth Headset User Guide

Issue 1.0

Contents

Introduction 3

About your headset 3

About Bluetooth connectivity 3

Get started 4

Keys and parts 4

Wear the headset 4

Switch the headset on or off 6

Use your headset for the first time 6

Charge the battery 6

Pair the headset 8

Pair your headset with your phone 8

Pair with a phone with NFC 8

Pair the headset with another phone 9

Make calls 9

Make and receive calls 9

Adjust the volume 10

Handle calls from two phones 11

Update the software of your

headset 12

Change the language of the voice

guidance 12

Setting 12

Switch the voice guidance or ear

detection off 12

Restore factory settings 12

Support 12

Product and safety information 13

Introduction

About your headset

With the Nokia Reaction Bluetooth Headset, you can make and receive calls hands-

free. You can pair with 4 compatible phones or other devices, and can connect to 2

at the same time.

The surface of this product is nickel-free.

Warning:

This product may contain small parts. Keep them out of the reach of small children.

Parts of the product are magnetic. Metallic materials may be attracted to the product.

Do not place credit cards or other magnetic storage media near the product, because

information stored on them may be erased.

Read this user guide carefully before using the product. Also, read the user guide for

the device that you connect to the product.

About Bluetooth connectivity

You can use Bluetooth to make a wireless connection to other compatible devices,

such as mobile phones.

Devices do not need to be in direct line-of-sight, but they must be within 10 meters

(33 feet) of each other. The connection may be affected by obstructions such as walls

or other electronic devices.

This device is compliant with Bluetooth Specification 3.0 supporting the following

profiles: hands-free (1.6), headset (1.2), advanced audio distribution (1.2), and audio/

video remote control (1.4) . Check with the manufacturers of other devices to

determine their compatibility with this device.

Get started

Keys and parts

1Earloop (optional)

2Call key

3Micro-USB connector

4Earpad

5Earpiece

6NFC area

7Power switch

8Microphone

9Volume down

10 Battery indicator

11 Volume up

12 Menu key

Wear the headset

Put the headset to your ear so that the hole in the earpad is directly toward your ear

canal and the hoop of the earpad is diagonally toward the top of your head. Point the

headset toward your mouth.

Your headset comes with several different-sized earpads – select the one that fits

the best, and is the most comfortable for your ear.

Change the earplug

Pull the current earpad from the earpiece, then push the new earpad into place.

Tip: If you'd like the headset to be more firmly against your ear, attach the optional

earloop to the earpiece, then slip the earloop over your ear.

When you're not using your headset, keep it in the carrying clip – the headset switches

off automatically. You can attach the clip to your clothing.

Switch the headset on or off

Switch on

Slide the power switch toward the earpiece.

Tip: The headset goes into power save mode when you're not wearing it. When you

put the headset back to your ear, it reconnects to your phone.

Switch off

Slide the power switch away from the earpiece, or put the headset into the carrying

clip.

Use your headset for the first time

Voice prompts guide you through setting up your headset when you switch the

headset on for the first time.

1 Switch the headset on.

2 Put the headset to your ear.

3 Follow the voice prompts to pair the headset with your phone.

Tip: You can change the language of the voice prompts with the Nokia accessory

software updater app.

Charge the battery

The headset has been charged at the factory, but you may want to recharge it before

you switch the headset on for the first time.

Warning:

Use only chargers approved by Nokia for use with this particular model. The use of

any other types may invalidate any approval or warranty, and may be dangerous. Use

of unapproved chargers may present a risk of fire, explosion, or other hazard.

1 Put the headset in the charging adapter.

2 Connect the adapter to a USB port on your computer, or to a compatible charger.

The lights in the battery indicator blink slowly when your headset is being charged.

When the indicator lights stop blinking, the battery is fully charged.

The fully charged battery has power for up to 6 hours of talk time. The standby time

is up to 12–15 days. When in the carrying clip, the standby time is up to 3 months.

When the battery charge is low, the frame around the battery indicator blinks.

Check the battery level

Make sure the headset is on, then swipe your finger over the battery indicator. The

three white indicator lights show the battery level. If the headset is in your ear, a voice

prompt tells you the remaining talk time.

Tip: You can charge your headset also without the charging adapter. Use a compatible

USB cable to connect the headset to your computer or a charger.

When you unplug a charger, hold and pull the plug, not the cord.

Pair the headset

Pair your headset with your phone

Before using the headset, you must pair and connect it to a compatible Bluetooth

device, such as your phone. You can't pair the headset with a phone during a call.

Follow these instructions when you are pairing your first device, or if you have

restored the factory settings.

1 On your phone, switch Bluetooth on.

2 Switch the headset on, then put the headset to your ear. You are guided with voice

prompts.

3 If your headset is not shown on your phone, search for new devices, then select

the headset.

4 If asked for a passcode on your phone, type in 0000.

Set your headset as a trusted device to make it connect to your phone automatically.

With some phones, you may need to make the connection separately after pairing.

Pair with a phone with NFC

If your phone supports Near Field Communication (NFC), it is easy to pair your

headset.

1 On your phone, make sure that NFC is on and the phone keys and screen are

unlocked.

2 Switch the headset on.

3 Tap the NFC area of the headset with the NFC area of the phone.

Set your headset as a trusted device to make it connect to your phone automatically.

Pair the headset with another phone

After pairing your headset with your phone, you can pair it with up to 3 other phones.

The headset can be connected to 2 phones at the same time, so you can make and

receive calls on, for example, your personal and your work phone at the same time.

1 On the phone you want to pair with, switch Bluetooth on.

2 Switch the headset on, then put it to your ear.

3 Press and hold the menu key, then follow the voice prompts.

As well as pairing with a phone, you can also switch ear detection and voice guidance

off, and restore factory settings.

Make calls

Make and receive calls

Make sure your headset is on, and that your headset is a trusted device in your phone

Bluetooth settings – so the headset connects to your phone automatically when

needed.

Most features can be handled with the call key on your headset.

Make a call

Put the headset to your ear, then make a call in the normal way.

Answer a call

Put the headset to your ear.

If the headset is already in your ear, press .

End a call

Press .

Decline a call

Decline the call as you normally would on your phone.

If the headset is in your ear, press twice.

Mute or unmute a call

Press the menu key on the headset.

Switch a call from your phone to your headset

Put the headset to your ear.

Switch a call from your headset to your phone

Take the headset from your ear.

When no call is in progress, you can redial the number you last called or use your voice

to make a call, if your phone supports these features with the headset.

Redial the last called number

Press twice.

Use voice dialing

Press and hold , then follow the instructions in the phone user guide.

Adjust the volume

Your headset listens to the background noise, and changes the volume automatically.

This manual suits for next models

Table of contents

Popular Headset manuals by other brands

Sena

Sena SMH10 quick start guide

IASUS

IASUS Stealth IA-NT4-BASIC-BT manual

Sennheiser

Sennheiser EPOS ADAPT 230 user guide

Doro

Doro Flexus HS2005 user guide

GE 98971 datasheet

Hama

Hama 00184070 quick start guide

Plantronics

Plantronics Blackwire 3200 Series user guide

Blue Tiger

Blue Tiger Advantage PLUS user manual

Jawbone

Jawbone Icon user manual

Jabra

Jabra FR 20 user guide

Roxcore

Roxcore Flow A+ manual

Turtle Beach

Turtle Beach XP 510 user guide

Philips

Philips SHB6101 Specification sheet

Jabra

Jabra PRO 9460 Duo datasheet

HyperX

HyperX HyperX Cloud Flight manual

Bose

Bose MIE2 Mobile owner's guide

Jabra

Jabra Steel quick start guide

HyperX

HyperX cloud ii quick start guide