Nokia BH-121 User manual
User Guide
Nokia Bluetooth Stereo Headset BH-121
BH-121
Issue 1.0 EN
Contents
About your headset 3
Keys and parts 4
Charge your headset 5
Switch on your headset 6
Pair and connect your headset using
NFC 7
About Bluetooth connectivity 8
Pair and connect your headset using
Bluetooth 9
Make and receive calls 10
Handle calls from 2 phones 11
Change the volume 12
Listen to music 13
Reset your headset 14
Restore factory settings 15
Troubleshooting and support 16
Product and safety information 17
Copyrights and other notices 18
User Guide
Nokia Bluetooth Stereo Headset BH-121
© 2013 Nokia. All rights reserved.
2
About your headset
With the Nokia Bluetooth Stereo Headset BH-121, you can turn any pair of headphones into a wireless
headset. Just pair up the devices, plug in your headphones, and you're ready to go.
If you have 2 phones, you can connect them both to the headset simultaneously. The noise-blocking
in-ear headphones give you a clear and powerful sound, and 3 different sizes of earbuds help you
find the perfect fit.
© 2013 Nokia. All rights reserved.
3
Keys and parts
Get to know your headset.
1 Battery indicator light
2Powerkey
3 Bluetooth indicator light
4Rewind key
5Fast forward key
6Volumekeys
7NFCarea
8Multifunction key
9 Carrying clip
10 Audio connector (3.5 mm)
11 Charger connector
The surface of this product is nickel-free.
© 2013 Nokia. All rights reserved.
4
Charge your headset
Before using the headset, you must charge the battery.
1. Plug a compatible charger into a wall outlet, or connect your headset to a compatible computer
with a USB cable.
2. Connect the micro-USB end of the cable to the charger connector on your headset. When the
battery is fully charged, the red battery indicator light turns green.
3. Disconnect the charger from the headset, then from the wall outlet.
When you unplug a charger, hold and pull the plug, not the cord.
© 2013 Nokia. All rights reserved.
5
Switch on your headset
Switch on your headset to check the battery.
Press and hold the power key for 2 seconds. If the battery is full, the battery indicator light flashes
green once. If the indicator light flashes red fast, charge the battery.
The headset automatically connects to the last connected device. If you have never paired your
headset with a device, or you have cleared the pairings, pairing mode is activated.
If the headset is not connected within 30 minutes, it switches off.
Switch the headset off
Press and hold the power key for 2 seconds. The headset closes all connections and switches off.
© 2013 Nokia. All rights reserved.
6
Pair and connect your headset using NFC
If your phone supports Near Field Communication (NFC), it's easy to pair your headset.
You can pair your headset with up to 8 devices.
Tap the NFC area of the phone and the headset together. If the headset is switched off, it switches
on before pairing.
To reconnect to a previously paired device, tap the NFC areas together. You can connect to up to 2
devices at the same time.
© 2013 Nokia. All rights reserved.
7
About Bluetooth connectivity
You can use Bluetooth to make a wireless connection to other compatible devices, such as mobile
phones.
The devices don't have to be in direct line-of-sight, but they must be within 10 metres (33 feet) of
each other. The connection may be affected by obstructions such as walls or other electronic devices.
This device is compliant with Bluetooth Specification 3.0 supporting the following profiles: hands-
free (1.6), headset (1.2), advanced audio distribution (1.2), and audio/video remote control (1.4). Check
with the manufacturers of other devices to determine their compatibility with this device.
© 2013 Nokia. All rights reserved.
8
Pair and connect your headset using Bluetooth
Before using the headset, you must pair and connect it with a compatible device. You can pair the
headset with 8 devices.
Make sure your headset is switched on.
1. To enter pairing mode, press and hold the power key for 2 seconds. The Bluetooth indicator light
flashes quickly.
2. Switch on Bluetooth on your phone, and search for Bluetooth devices.
3. Select the headset from the list to pair your phone with it.
4. If necessary, type in the passcode 0000.
When the headset is connected, the Bluetooth indicator light flashes slowly.
The next time you switch on the headset, it automatically connects to the last connected device.
If the connection is lost, the Bluetooth indicator light flashes twice repeatedly.
Tip: When your headset is connected to a device, you may want to pair it with other devices. To
go back to pairing mode, press and hold the power key for 5 seconds.
© 2013 Nokia. All rights reserved.
9
Make and receive calls
You can use your headset in various ways for handling calls.
Make sure your headset is on.
1. To make a call, use the phone.
2. To answer or end a call, press .
Tip: If your headset is switched off and there's an incoming call on the phone you last connected
the headset to, just switch on the headset to answer the call.
3. To reject an incoming call, press twice.
4. To make a call using voice dialling, press for 2 seconds.
Voice dialling is only available when not in call. Not all phones support this features with a headset.
© 2013 Nokia. All rights reserved.
10
Other manuals for BH-121
1
Table of contents
Other Nokia Headset manuals
Nokia
Nokia BH 104 - Headset - Over-the-ear Installation guide
Nokia
Nokia BH105 - Bluetooth Headset Ice User manual
Nokia
Nokia BH-503 User manual
Nokia
Nokia hs-13w - Wireless Image Headset User manual
Nokia
Nokia BH 604 - Headset - Binaural User manual
Nokia
Nokia Luna User manual
Nokia
Nokia Comm Band + CB-201 User manual
Nokia
Nokia BH-207 User manual
Nokia
Nokia Essence BH-610 User manual
Nokia
Nokia BH-222 User manual
Nokia
Nokia BH-209 User manual
Nokia
Nokia HS 36W User manual
Nokia
Nokia HS 26W - Headset - Over-the-ear User manual
Nokia
Nokia BH-501 User manual
Nokia
Nokia WH-208 Owner's manual
Nokia
Nokia DVB-H User manual
Nokia
Nokia Essence BH-610 User manual
Nokia
Nokia Bluetooth Headset BH-701 User manual
Nokia
Nokia BH 600 - Headset - Over-the-ear User manual
Nokia
Nokia BH-905 User manual
